science/p5-Geo-BUFR 1.42

science/p5-Geo-BUFR: Update to 1.42

Changes:	https://metacpan.org/dist/Geo-BUFR/changes

science/p5-Geo-BUFR: Update to 1.40

Changes:	https://metacpan.org/dist/Geo-BUFR/changes

science/p5-Geo-BUFR: Update to 1.39

Changes:	https://metacpan.org/dist/Geo-BUFR/changes

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

science: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Andreas Fehlner <fehlner@gmx.de>
  *  Brad Huntting <huntting@glarp.com>
  *  Chao Shin <quakelee@cn.FreeBSD.org>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Chia-Hsing Yu <me@davidyu.org>
  *  Chris Rees <utisoft@gmail.com>
  *  David Naylor <dbn@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Ed Schouten <ed@FreeBSD.org>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Erik B Knudsen
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Frederic Culot <frederic@culot.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Glenn Johnson
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Igor Serikov <iserikov@acm.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  Johannes M Dieterich <jmd@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  Ju Pengfei <jupengfei@gmail.com>
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Klaus Aehlig <aehlig@linta.de>
  *  Kurt Kanzenbach <kurt@kmk-computers.de>
  *  Leland Wang <llwang@infor.org>
  *  Li-Lun Wang <llwang@infor.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  NAKATA Maho <maho@FreeBSD.org>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nakata Maho <chat95@mbox.kyoto-inet.or.jp>
  *  Nakata Maho <maho@FreeBSD.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Pav Lucistnik <pav@oook.cz>
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@tutopia.com>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Ryo MIYAMOTO <rmiya@cc.hirosaki-u.ac.jp>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Shin'ya Murakami <murakami@ahs.scitec.kobe-u.ac.jp>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  Shin-ya Murakami <murashin@gfd-dennou.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Steve Wills <steve@mouf.net
  *  Steve Wills <steve@mouf.net>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  TAOKA Fumiyoshi
  *  Thierry Thomas <thierry@pompo.net>
  *  Tim Cas <ports@stdrand.com>
  *  Uffe Jakobsen <uffe@uffe.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  anholt@FreeBSD.org
  *  bacon@smithers.neuro.mcw.edu
  *  batman <batman@udel.edu>
  *  db
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  jbacon
  *  maintainer.freebsd@xpoundit.com
  *  mi
  *  rafan@infor.org
  *  shurd@FreeBSD.org
  *  thierry@pompo.net
  *  will

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Update to 1.38

Changes:	https://metacpan.org/changes/distribution/Geo-BUFR

Update to 1.37

Changes:	https://metacpan.org/changes/distribution/Geo-BUFR

Remove MASTER_SITE_SUBDIR

Take maintainership

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

- Update to 1.36

Changes:	http://search.cpan.org/dist/Geo-BUFR/Changes

- Update to 1.35 - Sort PLIST

Changes:	http://search.cpan.org/dist/Geo-BUFR/Changes

- Update to 1.34

- Update to 1.33

Changes:	http://search.cpan.org/dist/Geo-BUFR/Changes

- Update to 1.32

Changes:	http://search.cpan.org/dist/Geo-BUFR/Changes

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

After r390893, chmod u+w/u-w for stripping perl XS modules is unnecessary, and in fact now leads to incorrect permissions.

Remove all instances of it from perl@ ports.

- Fix shebangs - Strip library

Approved by:	portmgr blanket
MFH:		2015Q2

- Update to 1.31

Changes:	http://search.cpan.org/dist/Geo-BUFR/Changes

- Update to 1.30

Changes:	http://search.cpan.org/dist/Geo-BUFR/Changes

- Update to 1.29

Changes:	http://search.cpan.org/dist/Geo-BUFR/Changes

- Update to 1.29

- Update to 1.28 - Sort PLIST

Changes:	http://search.cpan.org/dist/Geo-BUFR/Changes

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

- Update to 1.27

Remove all the bootstrap files (.bs) from the plists.

Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight

- Update to 1.26

Support STAGEDIR.

Add NO_STAGE all over the place in preparation for the staging support (cat: science)

- Update to 1.25

Changes:	http://search.cpan.org/dist/Geo-BUFR/Changes

- Update to 1.24 - Add BUILD_DEPENDS - Sort MAN3 and PLIST - Fix Makefile header

Changes:	http://search.cpan.org/dist/Geo-BUFR/Changes

- Convert to new perl framework - Trim Makefile header - Remove MAKE_JOBS_SAFE=yes, it's the default.

- Update to 1.23 Changes: http://cpansearch.perl.org/src/PSANNES/Geo-BUFR-1.23/Changes

- Update to 1.22 Changes: http://cpansearch.perl.org/src/PSANNES/Geo-BUFR-1.22/Changes - Trim Makefile headers - Add LICENSE - Reset maintainer to perl@

- Update to 1.21 ChangeLog: http://cpansearch.perl.org/src/PSANNES/Geo-BUFR-1.21/Changes

BUFR = Binary Universal Form for the Representation of meteorological data. BUFR is approved by WMO (World Meteorological Organization) as the standard universal exchange format for meteorological observations, gradually replacing a lot of older alphanumeric data formats.

This module provides methods for decoding and encoding BUFR messages, and
for displaying information in BUFR B and D tables and in BUFR flag and code
tables.

Installing this module also installs some programs: bufrread.pl,
bufrresolve.pl, bufrencode.pl, bufr_reencode.pl and bufralter.pl. See
https://wiki.met.no/bufr.pm/start for examples of use. For the majority of
potential users of Geo::BUFR I would expect these programs to be all that
you will need Geo::BUFR for.

WWW: http://search.cpan.org/dist/Geo-BUFR/