science/py-pupynere 1.0.15_12

*/py-*: Update version requirement of *_DEPENDS

*/*: bump PORTREVISION after switching to NumPy 2.x

*/*: Switch to NumPy 2.x

PR:		294328
Exp-run:	antoine

math/py-numpy: switch all consumers to math/py-numpy1

...and bump PORTREVISIONs of consumers with hard RUN_DEPENDS

PR: 281470

science/py-pupynere: Clean up pkg-descr

science/py-pupynere: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for package change

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

science: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Andreas Fehlner <fehlner@gmx.de>
  *  Brad Huntting <huntting@glarp.com>
  *  Chao Shin <quakelee@cn.FreeBSD.org>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Chia-Hsing Yu <me@davidyu.org>
  *  Chris Rees <utisoft@gmail.com>
  *  David Naylor <dbn@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Ed Schouten <ed@FreeBSD.org>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Erik B Knudsen
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Frederic Culot <frederic@culot.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Glenn Johnson
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Igor Serikov <iserikov@acm.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  Johannes M Dieterich <jmd@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  Ju Pengfei <jupengfei@gmail.com>
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Klaus Aehlig <aehlig@linta.de>
  *  Kurt Kanzenbach <kurt@kmk-computers.de>
  *  Leland Wang <llwang@infor.org>
  *  Li-Lun Wang <llwang@infor.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  NAKATA Maho <maho@FreeBSD.org>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nakata Maho <chat95@mbox.kyoto-inet.or.jp>
  *  Nakata Maho <maho@FreeBSD.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Pav Lucistnik <pav@oook.cz>
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@tutopia.com>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Ryo MIYAMOTO <rmiya@cc.hirosaki-u.ac.jp>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Shin'ya Murakami <murakami@ahs.scitec.kobe-u.ac.jp>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  Shin-ya Murakami <murashin@gfd-dennou.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Steve Wills <steve@mouf.net
  *  Steve Wills <steve@mouf.net>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  TAOKA Fumiyoshi
  *  Thierry Thomas <thierry@pompo.net>
  *  Tim Cas <ports@stdrand.com>
  *  Uffe Jakobsen <uffe@uffe.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  anholt@FreeBSD.org
  *  bacon@smithers.neuro.mcw.edu
  *  batman <batman@udel.edu>
  *  db
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  jbacon
  *  maintainer.freebsd@xpoundit.com
  *  mi
  *  rafan@infor.org
  *  shurd@FreeBSD.org
  *  thierry@pompo.net
  *  will

With hat:	portmgr

science/py-pupynere: Update USES=python

math/py-numpy requires Python 3.7+

science/py-pupynere: Remove PYNUMPY

Remove # $FreeBSD$ from Makefiles.

Drop python 2.7 support from a few ports

With hat:	portmgr

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Switch all pypi.python.org WWWs to a new PyPi home pypi.org where they now redirect to anyway. All new urls checked to return 200, I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat

Bump PORTREVISIONs of all users of math/mpc that we just updated to version 1.1.0 (via revision 464079).

Relax USES=python

- Update COMMENT
- Remove BUILD_DEPENDS
- Add NO_ARCH
- Allow concurrent installation (USE_PYTHON=concurrent)
- Add PyPI as primary WWW
- Update WWW
- Take maintainership

Give xmj@'s ports back to the pool

PR:		226157
Submitted by:	xmj

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

Change all occurrences of xmj@chaot.net to johannes@perceivon.net as the owner requested.

This only affects "Created by" lines with one exception: devel/uclcmd. There the maintainer is changed. This was overlooked in r416918.

Approved by: junovitch (mentor)

Change MAINTAINER from xmj@FreeBSD.org to johannes@perceivon.net

PR:           210265
Submitted by: Johannes Jost Meixner (johannes@perceivon.net)
Approved by:  pi (mentor)

Several ports: Change MAINTAINER from xmj@chaot.net to xmj@FreeBSD.org

PR:		209746
Submitted by:	xmj

- Convert ports of science/ and security to new USES=python

Approved by:	portmgr (implicit)

Update the default version of GCC in the Ports Collection from GCC 4.7.4 to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Update the default version of GCC used in the Ports Collection from GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

science/py-pupynere: Modernise: Enable STAGE, AUTOPLIST and more

- Stagify
- Use PYDISTUTILS_AUTOPLIST, remove pkg-plist
- Kill easy_install with fire!
- Remove patch to setup.py

PR:		ports/186366
Submitted by:	Johannes Jost Meixner <xmj@chaot.net>

Python cleanup: - USE_PYTHON* = 2.X -> USE_PYTHON* = 2 - USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes Reviewed by:	python (mva, rm) Approved by:	portmgr-lurkers (mat)

Update to libmpc version 1.0.1 which brings the following fixes:

- Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat: science)

science/py-pupynere: Module for reading and writing NetCDF files [NEW PORT]

Pupynere is a Python module for reading and writing NetCDF files, using the same
API as Scientific.IO.NetCDF and pynetcdf. It depends only on Numpy, so you don't
need to have the NetCDF library installed.

WWW: https://pypi.python.org/pypi/pupynere/

PR:		ports/179744
Submitted by:	Johannes Jost Meixner <xmj@chaot.net>