science/py-pycsw 2.6.2_2

*/*: switch dependency from devel/py-lxml5 to devel/py-lxml

Currently, there are two versions of python XML processing library
which conflict each other in the ports tree, namely:
- devel/py-lxml5 (now at version 5.4.0)
- devel/py-lxml  (now at version 6.0.1)

To avoid the situation that some ports depend on py-lxml5 and some
others do on py-lxml (by switching dependencies individually), this
commit switches the dependencies from py-lxml5 to py-lxml at once.

Additional note: There are still two ports (textproc/py-rdflib and
www/py-draftjs-exporter) depending on py-lxml5 since they limit upper
version to less than 6.

PR:		289491
Approved by:	Michiel van Baak Jansen <michiel@vanbaak.eu>, arrowd,
		crees, madpilot, delphij, marcus, nivit, kai,
		skreuzer, fluffy, bofh, thierry, stephen, sunpoet,
		0mp, Eric Camachat <eric@camachat.org>

*/*: update dependency on devel/py-lxml to devel/py-lxml5 (2nd attempt)

This is a follow up to the commit 230fb2661c78, which updated some
ports' dependencies on devel/py-lxml to devel/py-lxml5. It was an
attempt to follow the dependency change of
www/py-beautifulsoup. However, the switch was incomplete and broke
some other ports.

It has turned out that the ports depending on devel/py-lxml (at
version 4.9.3) does not limit their dependencies' upper bound to 4.x
except for one (devel/py-pymaven-patch). So updating them to
devel/py-lxml5 (at version 5.4.0) should cause no harm.

This commit switch dependencies of all the ports (except
devel/py-pymaven-patch) to devel/py-lxml5 avoid potential conflicts.

Co-authored-by: Daniel Engberg <diizzy@FreeBSD.org>

PR:		287144, 288047
Reported by:	makc (via ports-committers),
		vvd (PR 288047),
		diizzy (PR 287144)
Approved by:	portmgr (chase dependency change, unbreak build)
Fixes:		230fb2661c78 (*/*: update dependency on devel/py-lxml to devel/py-lxml5)

science/py-pycsw: Update to 2.6.2

Changes:	https://github.com/geopython/pycsw/releases

graphics/py-OWSLib: Update to 0.31.0

science/py-pycsw: Update WWW and clean up pkg-descr

science/py-pycsw: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for package change

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

devel/py-shapely: Fix PORTNAME and WWW

- Bump PORTREVISION for package change

It is to minimize the patch of 2.0.1 update. Upstream also changed the tarball
from Shapely to shapely.

Approved by:	portmgr (blanket)
With hat:	python

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

devel/py-cppy, math/py-kiwisolver: fix versions

These ports install lib tagged as v0.0.0.
Both ports require devel/py-setuptools_scm to generate
the version of the library.

PR:		267120
Reported by:	jwb
Reviewed by:	jwb

science/py-pycsw: Update USES=python

graphics/py-pyproj requires Python 3.8+

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

science: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Andreas Fehlner <fehlner@gmx.de>
  *  Brad Huntting <huntting@glarp.com>
  *  Chao Shin <quakelee@cn.FreeBSD.org>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Chia-Hsing Yu <me@davidyu.org>
  *  Chris Rees <utisoft@gmail.com>
  *  David Naylor <dbn@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Ed Schouten <ed@FreeBSD.org>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Erik B Knudsen
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Frederic Culot <frederic@culot.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Glenn Johnson
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Igor Serikov <iserikov@acm.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  Johannes M Dieterich <jmd@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  Ju Pengfei <jupengfei@gmail.com>
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Klaus Aehlig <aehlig@linta.de>
  *  Kurt Kanzenbach <kurt@kmk-computers.de>
  *  Leland Wang <llwang@infor.org>
  *  Li-Lun Wang <llwang@infor.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  NAKATA Maho <maho@FreeBSD.org>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nakata Maho <chat95@mbox.kyoto-inet.or.jp>
  *  Nakata Maho <maho@FreeBSD.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Pav Lucistnik <pav@oook.cz>
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@tutopia.com>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Ryo MIYAMOTO <rmiya@cc.hirosaki-u.ac.jp>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Shin'ya Murakami <murakami@ahs.scitec.kobe-u.ac.jp>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  Shin-ya Murakami <murashin@gfd-dennou.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Steve Wills <steve@mouf.net
  *  Steve Wills <steve@mouf.net>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  TAOKA Fumiyoshi
  *  Thierry Thomas <thierry@pompo.net>
  *  Tim Cas <ports@stdrand.com>
  *  Uffe Jakobsen <uffe@uffe.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  anholt@FreeBSD.org
  *  bacon@smithers.neuro.mcw.edu
  *  batman <batman@udel.edu>
  *  db
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  jbacon
  *  maintainer.freebsd@xpoundit.com
  *  mi
  *  rafan@infor.org
  *  shurd@FreeBSD.org
  *  thierry@pompo.net
  *  will

With hat:	portmgr

science/py-pycsw: Update to 2.6.1

Changes:	https://pycsw.org/development/announce/
		https://github.com/geopython/pycsw/commits/master

science/py-pycsw: Add CPE information

Approved by:	portmgr (blanket)

graphics/py-pyproj: Update to 3.1.0

- Update USES=python of dependent ports

Changes:	https://github.com/pyproj4/pyproj/releases

Remove # $FreeBSD$ from Makefiles.

Update to 2.6.0

Changes:	https://pycsw.org/development/announce/

Add py-pycsw 2.4.2

pycsw is an OGC CSW server implementation written in Python. Started in 2010
(more formally announced in 2011), pycsw allows for the publishing and discovery
of geospatial metadata via numerous APIs (CSW 2/CSW 3, OpenSearch, OAI-PMH,
SRU), providing a standards-based metadata and catalogue component of spatial
data infrastructures. pycsw is Open Source, released under an MIT license, and
runs on all major platforms (Windows, Linux, Mac OS X).

WWW: https://pycsw.org/
WWW: https://github.com/geopython/pycsw