security/gnutls 3.8.13

Update dns/libidn2 to 2.1.1

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://gitlab.com/libidn/libidn2/blob/master/NEWS

Update to 3.6.6.

Update dns/libidn2 to 2.1.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://gitlab.com/libidn/libidn2/blob/master/NEWS

Update to 3.6.5.

PR:		234012
Exp-run by:	antoine

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Update to 3.5.19.

Update to 3.5.18.

Update to 3.5.17.

security/gnutls: revert r431494 per FreeBSD 11.0 EOL

PR:		216045
Approved by:	portmgr blanket

Update to 3.5.16.

Update to 3.5.15.

Update to 3.5.13.

MFH:		2017Q2
Security:	https://gnutls.org/security.html#GNUTLS-SA-2017-4

Update to 3.5.12.

Update to 3.5.11.

Update to 3.5.9.  Disable use of libidn2 for now because it does not provide a pkgconfig file.

PR:		217073
Exp-run by:	antoine

Make atomic operations explicit to support old gcc.

PR:		216122

security/gnutls: unbreak aarch64 after r431214

lib/accelerated/aarch64/elf/aes-aarch64.s.tmp.S:5:1: error: unknown directive
.arch armv8-a+crypto
^
lib/accelerated/aarch64/elf/aes-aarch64.s.tmp.S:49:2: error: instruction requires: crypto
 aese v6.16b,v0.16b
 ^

PR:		216045
Approved by:	tijl (maintainer)

Update to 3.5.8.

PR:		215909
Submitted by:	brnrd
Exp-run by:	antoine
MFH:		2017Q1
Security:	0c5369fc-d671-11e6-a9a5-b499baebfeaf

Update to 3.4.17 and pass the right dlopen path for libtspi to configure.

Update to 3.4.16.

Add math/gmp to LIB_DEPENDS

Q/A warned that bin/certtool was linked to lib/libgmps.so.10

Approved by:	swills (mentor) tijl (maintainer)
Differential Revision:	https://reviews.freebsd.org/D8153

Most commonly used build systems support silent builds, when they hide actual commands executed and only show short summary line (like "CC foo.c"). CMake and ninja enable this by default, some autotools using ports do as well. This is unacceptable because we need complete build logs at any time, so we now switch to verbose build logs unconditionally. Note that this change deliberately affects ALL 

Change summary:

- Always do verbose builds for cmake, ninja and GNU configure (the
  latter includes check if --disable-silent-rules is actually supported
  by the configure script; there are isolated cases when it's not true)
- Remove CMAKE_VERBOSE, NINJA_VERBOSE and
  CONFIGURE_ARGS=--disable-silent-rules from all ports which set them
  for this is no longer needed
- Revert hacks for --disable-silent-rules support priorly committed
  to biology/ncbi-blast+ and net-p2p/mldonkey - no longer needed as well

Submitted by:	amdmi3
Reviewed by:	mat
Exp-run by:	antoine
Approved by:	portmgr (mat, antoine)
Differential Revision:	D7534

Update to 3.4.15.

MFH:		2016Q3
Security:	https://gnutls.org/security.html#GNUTLS-SA-2016-3

Update to 3.4.14.

Update to 3.4.13.

Update to 3.4.12.

libpkcs11mock1.so is commented out in pkg-plist because it is part of the
testsuite and shouldn't be installed.  This has been fixed upstream.

Update to 3.4.11.

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

- Update security/gnutls to 3.4.10. - Rename the LIBDANE option DANE because that's the name of the protocol   supported by libgnutls-dane and gnutls-cli.  Also clarify the option   description. - Add an IDN option. - libgnutls-openssl has been removed in 3.4.  Some ports used this library   in their LIB_DEPENDS but no port actually required it. - Some old API functions have been removed.  Ports t

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Take maintainer. - Fix a build problem with upcoming libc++.

PR:		207768, 208175
Approved by:	bdrewery (maintainer)

- bump PORTREVISION on ports depending on unbound

PR:		207948
Submitted by:	jaap@NLnetLabs.nl (maintainer)

- Update unbound to 1.5.7 - Bump PORTREVISIOn on dependent ports

Some Upgrade Notes:

This release fixes a validation failure for nodata with wildcards and
emptynonterminals. Fixes OpenSSL Library compability. Fixes correct
response for malformed EDNS queries. For crypto in libunbound there is
libnettle support.

Qname minimisation is implemented. Use qname-minimisation: yes to
enable it. This version sends the full query name when an error is
found for intermediate names. It should therefore not fail for names
on nonconformant servers. It combines well with
harden-below-nxdomain: yes because those nxdomains are probed by the
qname minimisation, and that will both stop privacy sensitive traffic
and reduce nonsense traffic to authority servers. So consider
enabling both. In this implementation IPv6 reverse lookups add
several labels per increment, because otherwise those lookups would be
very slow. [ Reference
https://tools.ietf.org/html/draft-ietf-dnsop-qname-minimisation-08 ]

More details at <http://unbound.net>

PR:		206347
Submitted by:	Jaap Akkerhuis <jaap@NLnetLabs.nl>
Approved by:	maintainer timeout
Sponsored by:	DK Hostmaster A/S

Bump versions to chase Nettle shared library update

Update MASTER_SITES to fix fetching problem due to abnormal version number

PR:		202332

- Update to 3.3.17.1

MFH:		2015Q3
Relnotes:	http://permalink.gmane.org/gmane.comp.encryption.gpg.gnutls.devel/8268
Security:	ec6a2a1e-429d-11e5-9daa-14dae9d210b8

- Update to 3.3.16

Changes: http://permalink.gmane.org/gmane.comp.encryption.gpg.gnutls.devel/8235

Fix plist when LIBDANE is defined (PORTREVISION not bumped because package wouldn't be successful in the case).

Pointy hat to:	delphij
Reported by:	sunpoet
MFH:		2015Q2

Update to 3.3.15.

PR:		198875
Approved by:	maintainer

GnuTLS tries to use /usr/local/share/certs/ca-root-nss.crt. Instead of maybe using it if it is already installed or if the P11KIT option is selected (which depends on ca_root_nss), just always depend on ca_root_nss.

Reported by:	Tatsuki Makino

Add CPE information.

PR:		153859
Submitted by:	shun <shun.fbsd.pr@dropcut.net>

Update gnutls to 3.2.21

PR:		196400
Approved by:	bdrewery (maintainer)

- Fix plist for LIBDANE option

Approved by:	portmgr blanket

Fix build on systems without stdnoreturn.h

Reported by:	many

- Update to 3.2.19

Update to 3.2.18

dns/libidn: - Add USES=libtool and bump dependent ports - Add INSTALL_TARGET=install-strip - Always install libidn-components.png because it is used by libidn.info - Add -lintl to Libs.private instead of Libs in libidn.pc

- Switch dns/unbound to USES=libtool, drop .la files - Bump dependent ports as .so version has changed - While here, add LICENSE_FILE to dns/getdns

Approved by:	portmgr blanket

security/gnutls: Support OPTIONal library dependencies

Factor out libidn, libp11-kit and libtspi into OPTIONal library
dependencies, with the CRYWRAP, P11KIT and TPM options respectively, as per
the upstream documentation [1].

Make ZLIB an OPTION because we can, and the choice to customise
compression support in security software (especially lately) may be
very useful for some consumers.

Add CRYWRAP, P11KIT, TPM and ZLIB to OPTIONS_DEFAULT to retain current
default functionality.

[1] http://gnutls.org/manual/html_node/Downloading-and-installing.html

Inspired by:	Recent gnutls 2 -> 3 change, fan of minimal dependencies

PR:		192090
Submitted by:	koobs
Approved by:	maintainer

- Update security/libtasn1 to 4.0 - Add USES= libtool and set INSTALL_TARGET to install-strip - Drop useless bsd.port.options.mk include - Bump PORTREVISION of ports that depend on libtasn1 as   shlib version has changed - Add an UPDATING entry for that

Exp-run by:	antoine

- Fix plist

Reported by:	many