shells/p5-Bash-Completion 0.008_2

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

shells: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Carlos Jacobo Puga Medina <cpm@FreeBSD.org>
  *  Cyrille.Lefevre@laposte.net
  *  Danijel Tasov <danielt@pilgerer.org>
  *  David O'Brien <obrien@NUXI.com>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Hajimu UMEMOTO <ume@FreeBSD.org>
  *  Igor Pokrovsky <ip@unixway.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Kai Wang <kaiw27@gmail.com>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Nobuhiro Yasutomi <nobu@psrc.isac.co.jp>
  *  Oliver Eikemeier
  *  Patrick Gardella <patrick@FreeBSD.org>
  *  Pawel Pekala <pawel@FreeBSD.org>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Richard Rose <freebsd-security@rikrose.net>
  *  Sean Chittenden <seanc@FreeBSD.org>
  *  Sergey Matveychuk <sem@FreeBSD.org>
  *  Serhii (Sergey) Kozlov <skozlov@FreeBSD.org>
  *  Shinsuke Matsui <smatsui@karashi.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sylvio Cesar <sylvio@FreeBSD.org>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  UMENO Takashi <umeno@rr.iij4u.or.jp>
  *  Vaida Bogdan
  *  Will Andrews <andrews@technologist.com>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  conrads@cox.net
  *  erich@rrnet.com
  *  gebhart@secnetix.de
  *  kirk@strauser.com
  *  mcglk@artlogix.com
  *  torstenb

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Remove Perl core module

- Bump PORTREVISION for dependency change

Cosmetic change

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except for where it resulted in a change in output from build-depends-list or run-depends-list.

Approved by:	portmgr (adamw)

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

- Add LICENSE_FILE

- Add NO_ARCH - Sort PLIST

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

- Remove outdated PERL_LEVEL check

- Support STAGEDIR

Add NO_STAGE all over the place in preparation for the staging support (cat: shells)

- Convert to new perl framework

- Add LICENSE - Cleanup Makefile header

- Cleanup outdated checks. (PERL_LEVEL < 5.12) - Assign some p5- ports under perl@ maintainership.

Approved by:	portmgr@ (bapt@)

- Revert ports/165605 as requested by portmgr@

Note: devel/p5-B-Size and devel/p5-Devel-Arena
where intentionally not restored.

PR:             ports/165605
Approved by:    portmgr (bapt)
Feature safe:   yes (I sure hope so)

- Remove ports that only work with < perl 5.12 (devel/p5-B-Size, devel/p5-Devel-Arena) - Remove conditionals for PERL_LEVEL < 501200 - Remove regression-test targets b/c this will be centralized in Mk/bsd.perl.mk - Other minor cleanups   RUN_DEPENDS = ${BUILD_DEPENDS} -> RUN_DEPENDS:= ${BUILD_DEPENDS}

PR:             ports/165605
Submitted by:   pgollucci (myself)
Approved by:    portmgr (linimon)
Exp Run by:     linimon
Tested by:      make index

- Add p5-Bash-Completion 0.008

bash completion should just work when you install new commands. Bash::Completion
is a system to use and write bash completion rules.

For end-users, you just need to add this line to your .bashrc or .bash_profile:

    setup-bash-complete

This will load all the installed Bash::Completion plugins, make sure they should
be activated and generate the proper bash code to setup bash completion for
them.

If you later install a new command line tool, and it has a
Bash::Completion::Plugin -based plugin, all your new shells will have bash
completion rules for it. You can also force immediate setup by running the same
command:

    setup-bash-complete

To write a new Bash::Completion plugin, see Bash::Completion::Plugin.

WWW: http://search.cpan.org/dist/Bash-Completion/