sysutils/fcron3.2.1_2

sysutils/fcron: Moved man to share/man

Approved by:    portmgr (blanket)

sysutils/fcron: fix owner of fcronsighup

While here, pet linters.

PR:		272537
Reported by:	bob@eager.cx (maintainer)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Convert to UCL & cleanup pkg-message (categories s)

Some typo fixes and whitespace cleanup for pkg-descr files.

sysutils/fcron: 3.2.0 -> 3.2.1

- @-lines can now be run up to every second (previously every 10s at most)

PR:		211451
Submitted by:	bob@eager.cx (maintainer)

When there is a do-install target, do not use a post-install target, do everything at once.  Sometime, rename post-install into a options helper target.

I did not fix ports that were such a mess that I could not figure out
what they really wanted to do.  I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.

With hat:	portmgr
Sponsored by:	Absolight

- Fix trailing whitespace in pkg-descrs, categories [p-x]*

Approved by:	portmgr blanket

sysutils/fcron: 3.0.6 -> 3.2.0

Changes:
  http://fcron.free.fr/doc/en/changes.html
- updated maintainer mail

PR:		209139
Submitted by:	bob@eager.cx (maintainer)

Cleanup DIST* variables.

When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup

With hat:	portmgr
Sponsored by:	Absolight

Simplify plist

Remove indefinite articles and trailing periods from COMMENT, plus minor COMMENT typos and surrounding whitespace fixes. A few Makefiles where not included as they contain Latin-1 characters that break the Phabricator workflow. Categories P-S.

CR:		D422
Approved by:	portmgr (bapt)

Support stage Modernisation: - Use @sample - Install pam files into prefix - Use USERS/GROUPS framework - Remove now useless pkg-install/pkg-deinstall scripts

PR:		190162
Submitted by:	Zsolt Udvari

- Convert gmake,bzip2,xz to USES

Approved by:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat: sysutils)

- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)

In the rc.d scripts, change assignments to rcvar to use the literal name_enable wherever possible, and ${name}_enable when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

sysutils/fcron: fixup default argument promotion

When mode_t is char- or short-like, it will be promoted to the pure
int when it is passed as the variable argument [1], so we should pass
'int' to the va_arg.

I had also eliminated fflush for the stream opened read-only, since
it will always fail and there is no need to flush read-only streams.

[1] http://c-faq.com/~scs/cclass/int/sx11c.html

Feature safe: yes
PR: 152304

Over to new volunteer

Approved by:	rene (mentor, implicit), maintainer (via email to ports@)

- Get Rid MD5 support

- Update to 3.0.6 - Add LICENSE

Changes:	http://fcron.free.fr/doc/en/changes.html
PR:		ports/151352
Submitted by:	Sebastien Santoro <dereckson@gmail.com>
Approved by:	pgollucci (mentor, implicit)

Begin the process of deprecating sysutils/rc_subr by s#. %%RC_SUBR%%#. /etc/rc.subr#

- Update to 3.0.3

PR:		113386
Submitted by:	Brad Huntting <huntting@glarp.com> (maintainer)

- Update to 3.0.2

PR:		ports/108008
Submitted by:	Brad Huntting <huntting at glarp.com> (maintainer)

- Install pam files directly (in /etc/pam.d, unless they already exist)   rather than just leaving them in the examples directory.  There seems   to be no real security advantage to not installing the pam files since   they are required for fcron and fcrontab to operate, and root privs are   required to install fcron to begin with.

- The sockaddr.sa_len was not set prior to calls to bind() and connect().
  The upshot begin that fcrondyn was unable to open the socket
  to communicate with fcron.

PR:		ports/97066
Submitted by:	maintainer

Update to 3.0.1.

PR:		ports/92990
Submitted by:	Brad Huntting <huntting@glarp.com> (maintainer)

- Fix fcron crashing with disabling of fcrondyn - Get rid of unnessesary patch

PR:		ports/88883
Submitted by:	maintainer

Do not overwrite configuration files during an update.

Do not install the bitstring(3) manual page, as it ships with the base system.

PR:		ports/87851
Submitted by:	maintainer

- Update to 3.0.0 - Pass maintainership to submitter

PR:		ports/85817
Submitted by:	Brad Huntting <huntting@hunkular.glarp.com> (new maintainer)

Reset maintainership of Seamus Venasse who has not responded for some time. Thank you for your efforts in the past!

Noticed by:	tobez
Approved by:	portmgr (self)

- Unbreak build on 5.3+

PR:		ports/74798
Submitted by:	Evan Dower <evantd(at)cs.washington.edu>

BROKEN on 5.x: Does not compile

SIZEify (maintainer timeout)

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

	USE_LIBTOOL=YES		->	USE_LIBTOOL_VER=13
	USE_AUTOCONF=YES	->	USE_AUTOCONF_VER=213
	USE_AUTOMAKE=YES	->	USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

De-pkg-comment.

Mark NO_PACKAGE: something causes the package builds to go haywire and spit out an infinite amount of text (this is bad for disk space)

PERL -> REINPLACE And some ports have USE_PERL5=yes now.

Update to 2.1.0

PR:		34221
Submitted by:	maintainer

assign new MAINTAINER.

PR:		31110
Submitted by:	Seamus Venasse <svenasse@polaris.ca>

upgrade to 2.0.0

PR:		31153
Submitted by:	Jerry A! <jerry@thehutt.org>

o add missed bin/fcronsighup. o utilize DOCSDIR. o install fcron.{allow,deny,conf}.dist and remove them if unchanged.

Add patch patch-configure.in to stop checking for ${PREFIX}/etc during configure BUMP Portrevision

Backout 1.5 of Makefile ETC is already set so why should configure need to autodetect Also if you build as non-root you don't have correct perms on etc

Create ${PREFIX}/etc dir so configure script finds to automagically.

PR:		30038
Submitted by:	leeym@utopia.leeym.com

upgrade to 1.1.1 drop maintainership