sysutils/htop 3.5.3

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Switch to USES=libtool

Approved by:	portmgr blanket

- Remove leading indefinite article from COMMENT - Convert to new LIB_DEPENDS format - Convert to new options helper - Fix USE_PYTHON_BUILD - Support STAGEDIR

Approved by:	portmgr (blanket)

Python cleanup: - USE_PYTHON* = 2.X -> USE_PYTHON* = 2 - USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes Reviewed by:	python (mva, rm) Approved by:	portmgr-lurkers (mat)

- Remove manual creation and removal of share/applications, as it's now in the mtree (categories starting with [st])

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat: sysutils)

Let htop build when python 3 is default.

Approved by:	maintainer timeout (2 weeks)

Fix pkg-message instructions.

Change package message so that the fstab line includes the late option so that
it doesn't fail to boot if /usr is on a different partition.

PR:		ports/178690
Submitted by:	swills
Approved by:	Hung-Yi Chen <gaod@hychen.org> (maintainer)

Convert USE_NCURSES by USES=ncurses Convert USE_READLINE by USES=readline

- Update to 1.0.2 - Convert to new options framework - Trim Makefile headers

PR:		ports/178010
Submitted by:	Hung-Yi Chen <gaod@hychen.org> (maintainer)

- Fix swap size calculation on i386 - Bump PORTREVISION

PR:		ports/169174
Submitted by:	vsjcfm@gmail.com
Approved by:	maintainer (timeout,14 days)

Add patches to show correct memory usage on FreeBSD

PR:		ports/167970
Submitted by:	Sayetsky Anton <vsjcfm@gmail.com>
Approved by:	maintainer

Update to version 1.0.1

PR:		ports/165661
Submitted by:	maintainer

Mark broken on powerpc as well as sparc64.  (In fact, on all the tier-2s.)

Hat:		portmgr

- Fix calculation of available memory

PR:		ports/157195
Submitted by:	Sayetsky Anton <jason@linux.lg.ua>
Approved by:	Hung-Yi Chen <gaod@hychen.org> (maintainer)

- Update to 0.9 - Transfer maintainership to the submitter

PR:		ports/153529
Submitted by:	Hung-Yi Chen <gaod@hychen.org>
Approved by:	maintainer timeout (yzlin; 7 months)

Add a new macro to deal with conflict between ncurses from base and ncurses from ports. If a ports is linked against ncurses from base or from the ports, it should then add: USE_NCURSES=yes

it is also possible to specify the hard dependency on the ports ncurses or one the base one adding the following macros:
WITH_NCURSES_PORT=yes or WITH_NCURSES_BASE=yes

PR:		ports/155269
Submitted by:	me
Reviwed by:	pav@
Approved by:	portmgr (pav@)
Exp-run by:	portmgr (pav@)

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:	portmgr (for Mk/bsd.port.mk part)
Tested by:	Multiple -exp runs

- pull some upstream svn fixes   o simply the code   o lsof failure checks   o coverity fixes

PR:             ports/143222
Submitted by:   Hung-Yi Chen <gaod@hychen.org>
Approved by:    maintainer timeout (yzlin ; 220 days)

- Update to 0.8.3

Approved by:	rafan (co-mentor)

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr

- Change to my mail address at FreeBSD.org

Approved by:	lwhsu (mentor)

- Update to 0.8.2 - Pass maintainership to submitter

PR:		135205
Submitted by:	Yi-Jheng Lin <yzlin@cs.nctu.edu.tw>

- Reset inactive maintainer

- Fix tree view

PR:		ports/132909
Submitted by:	Hung-Yi Chen <gaod@hychen.org>
Approved by:	maintainer timeout (1 month)

- Update to 0.8.1

PR:		ports/131345
Submitted by:	Hardy Schumacher <hardy.schumacher@amd.com>
Approved by:	maintainer timeout (2 weeks)

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:	exp build run (erwin)

- Update to 0.8 - Enable unicode support - Disable plsa lib (CPU affinity)

PR:		ports/125671
Submitted by:	Yi-Jheng Lin <yzlin at cs.nctu.edu.tw>
Approved by:	Tony Shadwick <tshadwick at oss-solutions.com> (maintainer)

- Mark not_for_archs sparc64

Approved by:	Tony Shadwick <tshadwick@oss-solutions.com> (maintainer)

Requires linprocfs, so not suitable for sparc64.

Approved by:	portmgr (self)

- Add check for linprocfs before configure.

Requested by:	Tony Shadwick <tshadwick@oss-solutions.com> (maintainer)
Approved by:	sat (mentor)

- New port htop

htop is an enhanced version of top, the interactive process viewer,
which can display the list of processes in a tree form.

PR:		ports/115873
Submitted by:	Tony Shadwick <tshadwick@oss-solutions.com> (maintainer)
Approved by:	sat (mentor)