sysutils/u-boot-rpi 2026.10

sysutils/u-boot-*: Update to 2024.01

Sponsored by:	Beckhoff Automation GmbH & Co. KG

sysutils/u-boot-rpi*: Fix sd boot after v2023.10 update

U-Boot update broke sd boot for rpi* models, use upstream patch that fixes it.

PR:		275655
Sponsored by:	Beckhoff Automation GmbH & Co.KG

sysutils/u-boot-master: Update to 2023.10

Sponsored by:	Beckhoff Automation GmbH & Co. KG

Remove WWW lines that have been moved into Makefiles

Approved by:	portmgr (implicit)

Move more WWW entries from pkg-descr files into Makefiles

The WWW: lines in the pkg-descr files of these ports where not at the
end of those files and have been missed in prior conversion runs.

Approved by:	portmgr (implicit)

sysutils/u-boot: Update to 2022.04

sysutils/u-boot-*: Add patch to fix MMC ordering

For FreeBSD we use a dtb overlay that switches between the sdhost and
the sdhci controller for sd card.
Recent changes in u-boot device model changed device numbering and the
sd card controller became "mmc2" for our setup which isn't accounted for
in the possible boot devices.
Patch isn't accepted yet upstream but bring this patch in for our ports anyway.

u-boot-*: Remove U_BOOT_SLAVE_PORTREVISION_2021.04

This is not needed anymore as we have 2921.07 now.

sysutils/u-boot-*: Remove ubldr support

We have been using loader.efi on armv7 for a long time now.
Remove support for booting with ubldr and the needed patches that were
never upstreamed.
While here add CONFIG_EFI_GRUB_ARM32_WORKAROUND=y in the Fragment as it's
needed to have the cache flushed for us when loader.efi is started.

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update U-Boot to 2019.01

This removes a lot of local patches

Approved by:	bapt (mentor, implicit)

Minor cleanup of u-boot's patches

Move to using the 'raw' patches for those patches that are currently
in u-boot's upstream landing zone.  Move to using a u-boot directory
since the numeric names aren't very u-boot specific and might
conflict. Bump PORTREVISION out of an abundance of caution.

Differential Review: https://reviews.freebsd.org/D16409

Remove MAINTAINER lines. They are set by the master port and all these ports are maintained by the uboot@ mailing list.

Approved by: uboot@ (maintainer of these ports)
Differential Review: https://reviews.freebsd.org/D16397

Revert r475122, r475123 and r475124.

To manage upstream, we use the exact patches we've submitted upstream
via their patchwork server. This deviates a little from a standard
port, but it's what we do with all the other u-boot ports and isn't
grossly out of line (many other ports pull patches during the build).
We do it this way because the standard way was an unmanageable
nightmare and resulted in divergence of u-boot ports.

Approved by: uboot@ (maintainer of these ports)
Differential Revision: https://reviews.freebsd.org/D16397

Use patchfiles that are in accordance with accepted Ports Collection usage.

Add patchfiles that are in accordance with accepted Ports Collection usage.

u-boot: Update to v2018.07

This add:

 - Explicit Depency on bison
 - Remove the DTC= on MAKE_ARGS as we use the BINARY_ALIAS already
 - metadata variables
 - Add cache cmds and disable secure boot
 - All RPI uses some special fragments to enable OF_BOARD.
   This makes u-boot using the DTB loaded by the firmware instead of
   using it's own.
 - For patches accepted but not in mainline due to timing issue use patchwork
   directly instead of putting files in the port
 - All armv7 boards are EFI enabled and boot in secure mode

More on metadata file :

The goal is to have a u-boot-install package that will read those and auto
install u-boot either on a dir (method copy) or on a device (method raw)
As all the u-boots are either one file to be dd'ed or one/multiple files
to be copied this simple method is good enough.
Since the maximum variable is 4 (for the raw method), simply use echo instead
of a .in files (ok bapt@)

Reviewed by:	imp
Approved by:	imp (implicit)
Differential Revision:	https://reviews.freebsd.org/D16241

Update WWW

Approved by:	portmgr (blanket)

Update the u-boot-rpi port to use the u-boot-master port. This also bring u-boot to version 2017.09 and the firmware files are no longer in this port but in sysutils/rpi-firmware. Also I'm stepping in as maintainer.

Tested On: RPI-B, RPI0v1.2, RPI0v1.3

Reviewed by:	imp
Approved by:	imp
Differential Revision:	https://reviews.freebsd.org/D13048

Fix build after arm-none-eabi-gcc was updated to 6.2.0

Fix few style violations in u-boot ports:

- GMAKE -> MAKE_CMD, MAKE_CMD is always set to required make implementation
- CP -> INSTALL_DATA, INSTALL_DATA makes sure files are always installed
  with proper permissions
- sysutils/u-boot-rpi: include missed files installed in STAGEDIR in PLIST_FILES

PR:		210982
Submitted by:	myself
Approved by:	maintainers timeout

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

Update u-boot-rpi to the latest versions of u-boot and firmware files.

The updated boot firmware reportedly supports the new Rpi Zero as well as
existing models. The latest u-boot now runs with caches enabled for faster
booting.

These changes add the standard freebsd API patch to flush caches on device
close. Also, CONFIG_CMD_ELF is removed from our config changes, because it's
now on by default for rpi in 2016.01.

Approved by:	sbruno(mentor)
Differential Revision:	https://reviews.freebsd.org/D5150

Update sysutils/u-boot-rpi to 2015.10

Submitted by:	ian
Approved by:	bdrewery (mentor)

Use gcc 4.9.2 to cross-compile u-boot for rpi.

Approved by:	rpaulo

Update ports in the remaining categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

Update USE_GITHUB so it does not require GH_COMMIT.

Using this new scheme allows only setting the _tag_ or _commit hash_ in
GH_TAGNAME and not having to know the hash for a tag.  This scheme will
download a tarball that has a different checksum than before due to a changed
directory name for extraction.

The following MASTER_SITES are provided to retain the old checksum and
directory structure (that require GH_COMMIT):
  GH -> GHL
  GITHUB -> GITHUB_LEGACY

Differential Revision:	https://reviews.freebsd.org/D748
Submitted by:	amdmi3
Reviewed by:	mat, swills, antoine, bdrewery
With hat:	portmgr

Use new RPi boot firmware files.  Also, fix a typo in the ubldr load address.

Approved by:	bapt

Add all the files required to boot a Raspberry Pi to the port.  Also, change the default environment variables to be similar to wandboard and beaglebone.

Approved by:	imp

Cleanup plist

Customized version of uboot for RPi, with extra files for boot images.

Submitted by: ian@