textproc/codespell 2.4.3

textproc/codespell: Update to 2.4.3

Changes:	https://github.com/codespell-project/codespell/releases

textproc/codespell: Update to 2.4.2

Changes:	https://github.com/codespell-project/codespell/releases

textproc/codespell: Update to 2.4.1

Changes:	https://github.com/codespell-project/codespell/releases

textproc/codespell: Update to 2.4.0

Changes:	https://github.com/codespell-project/codespell/releases

textproc/codespell: Update to 2.3.0

Changes:	https://github.com/codespell-project/codespell/releases

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

textproc/codespell: Update to 2.2.6

Changes:	https://github.com/codespell-project/codespell/releases

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

textproc/codespell: Update to 2.2.5

- Convert to USE_PYTHON=pep517

Changes:	https://github.com/codespell-project/codespell/releases

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

textproc/codespell: Update to 2.2.2

Changes:	https://github.com/codespell-project/codespell/releases

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

textproc/codespell: Update to 2.2.1

Changes:	https://github.com/codespell-project/codespell/releases

textproc/codespell: Update to 2.1.0

Changes:	https://github.com/codespell-project/codespell/releases
		https://github.com/codespell-project/codespell/commits/master

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Change MASTER_SITES from GitHub to CHEESESHOP

- Update USES=python
- Add USE_PYTHON=noflavors: there is no need for flavors
- Take maintainership

textproc/codespell: update to 2.0.0

Reported by:	portscout

textproc/codespell: Update to 1.17.1

PR:	246824
Submitted by:	fk@fabiankeil.de

Return textproc/codespell to the pool.

Sponsored by:	Rubicon Communications, LLC (netgate.com)

Convert to UCL & cleanup pkg-message (categories [t-u])

Update textproc/codespell to 1.14.

PR:		234799
Submitted by:	chitty_cloud at me dot com
Sponsored by:	The FreeBSD Foundation

Convert Python ports to FLAVORS.

Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

- Remove bogus (in presence of USE_GITHUB) USES=tar* - While here, minor cosmetic and license fixes

Approved by:	portmgr blanket

textproc/codespell: Update to version 1.8.

- Move to github.
- Update to version 1.8 with fixes and updated dictionary
- Use the included dictionary by default.

Approved by:	gjb

Do not hand roll PYTHON_CMD

Switch default python3 version from 3.3 to 3.4. Bump PORTREVISIONs for the affected ports.

Exp-run by:	antoine

- Convert textproc/ to USES=python

With hat:	python@

- Remove duplicate USES=tar:xz

Convert a bunch of EXTRACT_SUFX=... into USES=tar:...

Approved by:	portmgr (not really, but touches unstaged ports)

Update consumers of lang/python31 or higher to use Python version 3.X and consumers of lang/python31 or lower to use Python 2.X

This is in preparation of removing lang/python31 which expired on 2014-06-01

While here apply some fixes for textproc/codespell:
- USE_XZ -> USES=tar:xz
- remove unneeded USE_PYTHON_RUN line

Approved by:	python (mva)

- Convert to staging - Add license - Rename patch to follow makepatch naming - Use new options knobs

Sponsored by:	Absolight

Fix cluster build failure:  - Add USE_PYTHON_RUN  - Bump PORTREVISION

Submitted by:	pkg-fallout@

Add NO_STAGE all over the place in preparation for the staging support (cat: textproc)

Update to 1.6.

Update MASTERSITES for my server to use https

- Update to 1.5. - Remove leading comments in Makefile.

- Update to 1.4

PR:		ports/165629
Submitted by:	gjb@ (maintainer)

- update to 1.3

PR:		ports/163174
Submitted by:	gjb@freebsd.org (maintainer)
Feature safe:	yes

- Update to 1.2

PR:		ports/161163
Submitted by:	gjb@ (maintainer)

- Update to 1.1.1

PR:		ports/160056
Submitted by:	gjb@ (maintainer)

- Update MASTER_SITES - Do not bump PORTREVISION as the source is unchanged

PR:		ports/159825
Submitted by:	gjb (maintainer)

Source code spell checker.

WWW: http://git.profusion.mobi/cgit.cgi/lucas/codespell/

PR:		ports/159564
Submitted by:	Glen Barber <gjb at FreeBSD.org>