textproc/p5-PerlPoint-Package0.45.2_2

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Sanitize COMMENT per Section 5.6 of the FreeBSD Porter's Handbook (part 4).

Remove Created by lines where I am the one.

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except for where it resulted in a change in output from build-depends-list or run-depends-list.

Approved by:	portmgr (adamw)

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Make defining both PORTVERSION and DISTVERSION a DEV_ERROR.

There are two cases:

- The upstream versionning is compatible with our versionning, or using
  DISTVERSION's magic leads to a compatible PORTVERSION, use
  DISTVERSION.  If it is possible to use DISTVERSIONPREFIX and
  DISTVERSIONSUFFIX to make it compatible, use them.
- The upstream versionning is not compatible with our versionning, and
  DISTVERSION's magic does not lead to a correct PORTVERSION, then set
  PORTVERSION to the equivalent of our versionning, and set DISTNAME.
  It is possible to use a third variable where you store upstream's
  version and use it to compute PORTVERSION and/or DISTNAME, like the
  dns/bind9* ports do.

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

Cleanup plist

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Remove NOPORTDOCS and NOPORTEXAMPLES.

- Wrap up cd && foo in parenthesis, it'd break with bmake -j - Replace some FIND ... CPIO with COPYTREE_SHARE.

Support STAGEDIR.

Try and be consistent with what commands are silent and not in *install.

- MKDIR is silent
- ECHO is silent
- INSTALL_* are not silent
- CP/FIND/... are not silent

I fixed a few PORTDOCS misusage, I'll do a second pass.

With Hat:	perl@

Fix NO_STAGE attribution

Add NO_STAGE all over the place in preparation for the staging support (cat: textproc)

- Convert to new perl framework - Trim Makefile header - Remove MAKE_JOBS_SAFE=yes, it's the default.

- Remove SITE_PERL from *_DEPENDS

Submitted by:	az@

At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450 ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are currently broken. This is a temporary measure until we organically stop using := or someone(s) spend a lot of time changing all the ports over.

Explicit duplication > := > = and this just moves ports one step to the left

Approved by:	portmgr

- Cleaning MD5 in perl@'s ports

Approved by:	erwin@ (portmgr)

- only 13% of the p5- ports embed @comment $FreeBSD$:   so standarize and remove it

With Hat:   perl@

- Remove unneeded dependencies which is in perl-5.8.9 dist from ports   maintained by (perl|ports|kuriyama)@FreeBSD.org.

- Targets are: Test::Simple, Digest::MD5, Locale-Maketext,
  ExtUtils::MakeMaker, ExtUtils::ParseXS, File::Temp, Getopt::Long,
  Encode, Digest, Pod::Parser, File::Spec.

Reset mat@FreeBSD.org due to maintainer-timeouts and no response to email.

Hat:		portmgr

Update to 0.45.2

Use the CPAN site macro. Use DISTVERSION in place of DISTNAME where possible. Remove perl 5.005 shims.

Update to 0.45

Update to 0.43

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Update to 0.40

Be hipe and add SHA256

* reflect renaming on CPAN File-Spec to PathTools    + add devel/p5-PathTools, remove devel/p5-File-Spec    + update dependencies for all affected ports (make them unconditional),      bump PORTREVISION for these ports module was renamed * reflect renaming on CPAN PodParser to Pod-Parser    + add textproc/p5-Pod-Parser, remove textproc/p5-PodParser    + update dependencies for all affected ports (

* for all changed ports make dependencies on File::Temp, Digest::MD5,
  Storable unconditional

* remove 'CONFIGURE_ARGS= INSTALLDIRS=site' from Makefile's
  (this variable is forced by bsd.port.mk now)

* update Class-Autouse to 1.17

* update POE-API-Hooks to 1.05

* make portlint happy (clean IGNORE, convert spaces to tabs and so on)

After devel/p5-File-Temp has gained an IGNORE for PERL_LEVEL > 500800, all these ports were broken because they always depended on it. I've rearranged all the dependencies to fit the new scheme.

use evil(tm) PORTDOCS

Fix doc install

Add docs

Add p5-PerlPoint-Package 0.39, PerlPoint is both a presentation and a documentation toolset.