textproc/py-normality 3.1.0

textproc/py-normality: Update to 3.1.0

* Fold ICU option because its requirement, py-pyicu, is now a mandatory
  dependency since the 3.0.0 release.

* Switch to GitHub for a while because no sdist tarballs are available
  at PyPI.

Changelog since 2.5.0:

https://github.com/pudo/normality/compare/2.5.0...3.1.0

textproc/py-normality: Convert to USE_PYTHON=pytest

Approved by:	portmgr (blanket)
With hat:	python

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

textproc/py-normality: Update to 2.5.0

Changelog:

https://github.com/pudo/normality/compare/2.4.0...2.5.0

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

USE_PYTHON=pep517: bump PORTREVISION

textproc/py-normality: Update to 2.4.0

* Switch back to PyPI as the sdist now contains the test suite.

* Remove no longer required patch.

* Switch to PEP517 build framework.

Changelog since 2.3.3:

https://github.com/pudo/normality/compare/2.3.3...2.4.0

MFH:		No (PEP517 support not present in 2023Q1)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

textproc/py-normality: Update to 2.3.3

* Switch to new USES=pytest framework which fixes tests for py-normality
  and also py-fingerprints

* Rebase existing patch with additional reference to existing PR.

Changelog since 2.1.1:

https://github.com/pudo/normality/compare/2.1.1...2.3.3

PR:		263581

*/*: Cleanup after the removal of lang/python36

* Remove codes that aren't necessary after the removal of lang/python36
* Mark ports that aren't necessary with Python 3.7 or later as
  DEPRECATED and set EXPIRATION_DATE.

PR:		261046
Approved by:	lwhsu (python)

Mk: switch PYTHON_REL to 5 digits to support python 3.10.x

PR:		255013
Differential Revision:	https://reviews.freebsd.org/D29418
Exp-run by:	antoine
Approved by:	wen@, no objection from python@ or portmgr@

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

textproc/py-normality: Update to 2.1.1

* Switch to GitHub for a while to make use of the test suite.

* Add default option ICU to reflect the requirements given in setup.py.

* Also add a workaround to avoid configure/build errors with Python < 3.7.

Changelog since 1.0.0:

https://github.com/pudo/normality/compare/1.0.0...2.1.1

devel/py-banal: Update to 1.0.1

* The support for Python < 3.5 was dropped with the 1.0.0 release, adapt
  accordingly and update the pkg-descr.

* Do the same for textproc/py-{fingerprints,normality} to avoid breakage of
  bulk -a .  Both consumers will soon be updated to a newer release which
  also no longer have any support for Python < 3.5.

Changelog since 0.4.2:

https://github.com/pudo/banal/compare/528c339b...1.0.1

textproc/py-normality: Update to 1.0.0

Changelog:

* Drop support for unidecode

Approved by:	mentors (implicit)

Change my maintainer email address to my new one at the FreeBSD project.

Reviewed by:	miwi (mentor)
Approved by:	miwi (mentor)
Differential Revision: https://reviews.freebsd.org/D19050

Normality is a Python micro-package that contains a small set of text normalization functions for easier re-use. These functions accept a snippet of unicode or utf-8 encoded text and remove various classes of characters, such as diacritics, punctuation etc. This is useful as a preparation to further text analysis.

WWW: https://github.com/pudo/normality

PR:		229527
Submitted by:	freebsd_ports@k-worx.org
Sponsored by:	iXsystems Inc.