textproc/py-tablib 3.10.0

textproc/py-tablib: Update to 3.10.0

Changelog:

https://github.com/jazzband/tablib/releases/tag/v3.10.0

MFH:		2026Q3

textproc/py-tablib: Update to 3.9.0

While I'm here:

* Switch to the more preferred DISTVERSION.

* Also adjust USES=python accordingly, because Python 3.8 is no longer
  present in the ports tree after ca15850a2b13 while I'm here.

Changelog:

https://github.com/jazzband/tablib/releases/tag/v3.9.0

textproc/py-tablib: Update to 3.8.0

Changelog:

https://github.com/jazzband/tablib/releases/tag/v3.8.0

textproc/py-tablib: Update to 3.7.0

* Support for Python 3.8 was dropped with release 3.7.0, adjust
  USES=python accordingly.

Changelog:

https://github.com/jazzband/tablib/releases/tag/v3.7.0

devel/py-pyyaml: Move devel/py-yaml to devel/py-pyyaml

- Bump PORTREVISION of dependent ports for dependency change

textproc/py-tablib: Update to 3.6.1

* Remove the HTML option because the html export format does not depend
  on textproc/py-markuppy any longer,

Changelog since 3.5.0:

https://github.com/jazzband/tablib/blob/v3.6.1/HISTORY.md

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

textproc/py-tablib: Update to 3.5.0

Changelog:

https://github.com/jazzband/tablib/releases/tag/v3.5.0

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

USE_PYTHON=pep517: bump PORTREVISION

textproc/py-tablib: Update to 3.4.0

* Switch to PEP517 build framework.

Changelog:

https://github.com/jazzband/tablib/releases/tag/v3.4.0

MFH:		No (PEP517 support not present in 2023Q1)

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

textproc/py-tablib: Update to 3.3.0

* Switch to USE_PYTHON=pytest while I'm here.

Changes: https://github.com/jazzband/tablib/releases/tag/v3.3.0

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

textproc/py-tablib: Update to 3.2.1

Changelog:

https://github.com/jazzband/tablib/releases/tag/v3.2.1

textproc/py-tablib: Update to 3.2.0

Changelog:

https://github.com/jazzband/tablib/releases/tag/v3.2.0

textproc/py-tablib: Update to 3.1.0

Changelog:

https://github.com/jazzband/tablib/releases/tag/v3.1.0

MFH:		No (not compatible with net-mgmt/netbox in 2021Q4)

textproc/py-tablib: Add CPE information

Approved by:	portmgr (blanket)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update USES=python: math/py-pandas 1.2.0 requires Python 3.7+

PR:		250103

textproc/py-tablib: Update to 3.0.0

* Add "do-test" target to make future QA easier.

* Update WWW field.

Changelog:

https://github.com/jazzband/tablib/blob/v3.0.0/HISTORY.md

Update to 2.0.0

- Add CLI, HTML, ODS, PANDAS, XLS, XLSX and YAML options
- Update WWW

Changes:	https://github.com/jazzband/tablib/blob/master/HISTORY.md
PR:		250121
Submitted by:	sunpoet (myself)
Approved by:	maintainer (timeout, 18 days)

textproc/py-tablib: Fix RUN_DEPENDS of devel/py-backports.csv

* The Python version restriction of devel/py-backports.csv was relaxed in
  r519566.  Thus update the RUN_DEPENDS accordingly and remove the
  workaround for setup.py which is no longer needed.

* Bump PORTREVISION for package change.

PR:		243339
Submitted by:	sunpoet
MFH:		2020Q1 (blanket: fix of runtime dependencies)

Convert to UCL & cleanup pkg-message (categories [t-u])

textproc/py-tablib: Update to 0.13.0

While I'm here:

* Remove the dependency for math/py-pandas because it's listed as an extra
  dependency and thus not required for basic runtime.
* Add a note for users that want to make use of the Pandas Dataframe
  structure.
* Add a patch for setup.py to limit devel/py-backports.csv to Python 2.
* Pet portlint

Changelog:

https://github.com/kennethreitz/tablib/compare/v0.12.1...v0.13.0

Approved by:	mentors (implicit)

Change my maintainer email address to my new one at the FreeBSD project.

Reviewed by:	miwi (mentor)
Approved by:	miwi (mentor)
Differential Revision: https://reviews.freebsd.org/D19050

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Tablib is an format-agnostic tabular dataset library, written in Python. It allows one to import, export, and manipulate tabular data sets. Advanced features include, segregation, dynamic columns, tags & filtering, and seamless format import & export.

WWW: http://python-tablib.org

PR:		227295
Submitted by:	freebsd_ports@k-worx.org