www/py-scrapy2.18.0

all: bump USES=python version to 3.11+ in preparation of removing lang/python310

www/py-scrapy: Update to 2.18.0

Changelog:	https://github.com/scrapy/scrapy/releases/tag/2.18.0

Sync RUN_DEPENDS with the upstream requirements:
- Raise the minimum versions of w3lib (2.1.1), pyopenssl (24.3.0),
  queuelib (1.6.1), service-identity (24.2.0) and lxml (4.6.4);
  the stale floors previously allowed pkg to pair this scrapy with
  an incompatible w3lib 1.x at runtime
- Add direct dependencies on cryptography, brotli and
  backports.zstd (zstd response support on Python < 3.14), which
  upstream declares explicitly since 2.18

www/py-scrapy: Fix USE_PYTHON=cryptography usage

Approved by:	portmgr (blanket)
With hat:	python

security/py-pyopenssl: Move security/py-openssl to security/py-pyopenssl

- Update WWW
- Convert to USE_PYTHON=pep517
- Clean up Makefile
- Bump PORTREVISION for package change
- Bump PORTREVISION of dependent ports for dependency change

*/*: switch dependency from devel/py-lxml5 to devel/py-lxml

Currently, there are two versions of python XML processing library
which conflict each other in the ports tree, namely:
- devel/py-lxml5 (now at version 5.4.0)
- devel/py-lxml  (now at version 6.0.1)

To avoid the situation that some ports depend on py-lxml5 and some
others do on py-lxml (by switching dependencies individually), this
commit switches the dependencies from py-lxml5 to py-lxml at once.

Additional note: There are still two ports (textproc/py-rdflib and
www/py-draftjs-exporter) depending on py-lxml5 since they limit upper
version to less than 6.

PR:		289491
Approved by:	Michiel van Baak Jansen <michiel@vanbaak.eu>, arrowd,
		crees, madpilot, delphij, marcus, nivit, kai,
		skreuzer, fluffy, bofh, thierry, stephen, sunpoet,
		0mp, Eric Camachat <eric@camachat.org>

www/py-scrapy: Update to 2.13.3

https://github.com/scrapy/scrapy/releases/tag/2.13.3

PR:		286468
Approved by:	maintainer timeout (~3 months)
Co-authored-by: Jason E. Hale <jhale@FreeBSD.org>

*/*: update dependency on devel/py-lxml to devel/py-lxml5 (2nd attempt)

This is a follow up to the commit 230fb2661c78, which updated some
ports' dependencies on devel/py-lxml to devel/py-lxml5. It was an
attempt to follow the dependency change of
www/py-beautifulsoup. However, the switch was incomplete and broke
some other ports.

It has turned out that the ports depending on devel/py-lxml (at
version 4.9.3) does not limit their dependencies' upper bound to 4.x
except for one (devel/py-pymaven-patch). So updating them to
devel/py-lxml5 (at version 5.4.0) should cause no harm.

This commit switch dependencies of all the ports (except
devel/py-pymaven-patch) to devel/py-lxml5 avoid potential conflicts.

Co-authored-by: Daniel Engberg <diizzy@FreeBSD.org>

PR:		287144, 288047
Reported by:	makc (via ports-committers),
		vvd (PR 288047),
		diizzy (PR 287144)
Approved by:	portmgr (chase dependency change, unbreak build)
Fixes:		230fb2661c78 (*/*: update dependency on devel/py-lxml to devel/py-lxml5)

textproc/py-parsel: Update to 1.10.0

Convert to PEP-517.

Undeprecate consumers.

The Scrapy framework has been devided amongst several maintainers,
including myself, which isn't an ideal situation. textproc/py-parsel,
being part and parcel (pun intended) to the whole operation hasn't been
updated in ~6 years. This port is well past its EXPIRATION_DATE, with no
maintainer input, so I figure all is fair at this point to save Scrapy.

all: remove consumers of textproc/py-parsel on 2025-06-01

python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal

Any missed ports, feel free to bump.

Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.

www/py-scrapy: Update to 2.11.1

Changelog:	https://docs.scrapy.org/en/latest/news.html#scrapy-2-11-1-2024-02-14

PR:		277729
Approved by:	skreuzer (maintainer)

*: Change {RUN,TEST}_DEPENDS from security/py-service_identity to security/py-service-identity

- Bump PORTREVISION for dependency change (except security/py-trustme)

PR:		275167
Reported by:	Joakim Bergman <jocke@gipset.se>

*: Replace USES=pycryptography* with USE_PYTHON=cryptography{,_build,_test}

- Introduce USE_PYTHON=cryptography{,_build,_test}
- Switch all 96 ports from USES=pycryptography to with USE_PYTHON=cryptography{,_build,_test}
- Remove Mk/Uses/pycryptography.mk

PR:		273727
Approved by:	tcberner (portmgr)
Exp-run by:	antoine

framework: convert tree to use USES=pycryptography

A future commit will update to security/py-cryptography will introduce a
rust dependency.

PR:		254853

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

www: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *
  *  <hvo.pm@xs4all.nl>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron LI <aly@aaronly.me>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Abel Chow <achow@transoft.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Adrian Steinmann <ast@marabu.ch>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@FreeBSD.org>
  *  Aldert Nooitgedagt
  *  Alex Bakhtin <Alex.Bakhtin@gmail.com>
  *  Alex Deiter <Alex.Deiter@Gmail.COM>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alex Kapranoff <alex@kapranoff.ru>
  *  Alex Kapranoff <kapr@crosswinds.net>
  *  Alex Miller (<asm@asm.kiev.ua>)
  *  Alex Pesternikov <ap@page2rss.com>
  *  Alex Povolotsky <tarkhil@over.ru>
  *  Alex Varju <freebsd-ports@varju.ca>
  *  Alexander Koch <fbsd@meersau.de>
  *  Alexander Kriventsov
  *  Alexander Kriventsov <avk@vl.ru>
  *  Alexander Logvinov <info@logvinov.com>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Moisseev <moiseev@mezonplus.ru>
  *  Alexander Nusov <alexander.nusov@nfvexpress.com>
  *  Alexander Zhuravlev <zaa@zaa.pp.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey V. Degtyarev
  *  Alfred Perlstein <alfred@freebsd.org>
  *  Allie Micka <allie@pajunas.com>
  *  Anatoliy Dmytriyev <tolid@plab.ku.dk>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Anders Nordby <anders@fix.no>
  *  Andrea Cervesato <andrea@cervesato.it>
  *  Andrea Sozzi <as@g-cows.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrej Zverev <andrey.zverev@electro-com.ru>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrew T. Bennett <potatosaladx@gmail.com>
  *  Andrey Chernov <ache@FreeBSD.org>
  *  Andrey Kostenko <andrey@kostenko.name>
  *  Andrey Slusar <anray@FreeBSD.org>
  *  Anes Muhametov <anes@anes.su>
  *  Anes Mukhametov <anes@anes.su>
  *  Anonymous
  *  Antoine Brodin <antoine@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Antony Mawer <ports@mawer.org>
  *  Aron Schlesinger <as@bsdgroup.de>
  *  Ask Bjoern Hansen <ask@valueclick.com>
  *  Autrijus Tang <autrijus@autrijus.org>
  *  Ayumi M <ayu@commun.jp>
  *  Babak Farrokhi <babak@farrokhi.net>
  *  Bartek Rutkowski <robak@FreeBSD.org>
  *  Bartlomiej Rutkowski <r@robakdesign.com>
  *  Bernard Spil <brnrd@FreeBSD.org>
  *  Bernard Spil <brnrd@freebsd.org>
  *  Bill Brinzer <bill.brinzer@gmail.com>
  *  Bill Swingle <unfurl@FreeBSD.org>
  *  Bob Bomar <bob@fly.homeunix.org>
  *  Boris Lytochkin (lytboris@gmail.com)
  *  Brandon Fosdick <bfoz@bfoz.net>
  *  Brendan Molloy <brendan+freebsd@bbqsrc.net>
  *  Brent J. Nordquist <bjn@visi.com>
  *  Brian Somers <brian@FreeBSD.org>
  *  CHOI Junho <cjh@FreeBSD.org>
  *  Carlo Strub
  *  Carlo Strub <cs@FreeBSD.org>
  *  Cecile Neu <neu@mycontrol.de>
  *  Chadwick Sorrell chad@wickdev.com
  *  Charlie & <root@dev2.rambler.ru>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Cheng-Lung Sung <clsung@dragon2.net>
  *  Chin-San Huang <chinsan@mail2000.com.tw>
  *  Choe, Cheng-Dae
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Chris Larsen <darth@vader.dk>
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Christopher Knaust <jigboe@gmx.de>
  *  Clement Laforet <clement@FreeBSD.org>
  *  Clement Laforet <sheepkiller@cultdeadsheep.org>
  *  Conor McDermottroe <ports@mcdermottroe.com>
  *  Cory R King <coryking@mozimedia.com>
  *  Craig Rodrigues <rodrigc@FreeBSD.org>
  *  Dan Langille <dan@langille.org>
  *  Dan Langille <dvl@FreeBSD.org>
  *  Daniel B. Hemmerich
  *  Daniel Gerzo <danger@FreeBSD.org>
  *  Daniel Morante <daniel@morante.net>
  *  Daniel Roethlisberger <daniel@roe.ch>
  *  Daniel Wijnands <daniel@itxl.nl>
  *  Danny Warren <danny@dannywarren.com>
  *  Dash|RD
  *  Dave Cottlehuber <dch@FreeBSD.org>
  *  David Barksdale <amatus@gnu.org>
  *  Dean Hollister <dean@odyssey.apana.org.au>
  *  Denis Pokataev <catone@cpan.org>
  *  Dennis Herrmann <adox@mcx2.org>
  *  Denny Lin <dennylin93@hs.ntnu.edu.tw>
  *  Dikshie <dikshie@sfc.wide.ad.jp>
  *  Dima Sivachenko
  *  Dima Sivachenko <dima@Chg.RU>
  *  Dirk Froemberg <dirk@FreeBSD.org>
  *  Ditesh Shashikant Gathani <ditesh@gathani.org>
  *  Dmitry Liakh <dliakh@ukr.net>
  *  Dmitry Semkin <lslarry@gmail.com>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Dmitry Sivachenko <mitya@yandex-team.ru>
  *  Domas Mituzas <midom@dammit.lt>
  *  Dominic Mitchell <dom@happygiraffe.net>
  *  Dominique Goncalves <dominique.goncalves@gmail.com>
  *  Douglas Thrift
  *  Douglas Thrift <douglas@douglasthrift.net>
  *  Dryice Liu <dryice@FreeBSD.org>
  *  Dryice Liu <dryice@dryice.name>
  *  Elisey Savateev <b3k@mail.ru>
  *  Elvis Chiang <elvis@sslab.cs.ccu.edu.tw>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Ernst de Haan <znerd@FreeBSD.org>
  *  Erwin Lansing <erwin@FreeBSD.org>
  *  Espen Tagestad <espen@tagestad.no>
  *  Euan Thoms <euan@potensol.com>
  *  Fanying Jen <fanying@fynet.com>
  *  Fernan Aguero
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Florent Thoumie <flz@FreeBSD.org>
  *  Florent Thoumie <flz@xbsd.org>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  Francisco Cabrita <include@npf.pt.freebsd.org>
  *  Frank Behrens <frank@pinky.sax.de>
  *  Frank Mayhar <frank@exit.com>
  *  Frank Wall <fw@moov.de>
  *  Fred Cox
  *  Frederic Culot <culot@FreeBSD.org>
  *  Frederic Culot <frederic@culot.org>
  *  Fumihiko Kimura <jfkimura@yahoo.co.jp>
  *  G. Adam Stanislav <adam@whizkidtech.net>
  *  Garrett A. Wollman
  *  Gea-Suan Lin <gslin@ccca.nctu.edu.tw>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Gea-Suan Lin <gslin@netnews.NCTU.edu.tw>
  *  Geoffroy Desvernay <dgeo@centrale-marseille.fr>
  *  George Hartzell <hartzell@alerce.com>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Gerard Seibert <gerard@seibercom.net>
  *  Gerrit Beine (<tux@pinguru.net>)
  *  Gerrit Beine <gerrit.beine@gmx.de>
  *  Gerrit Beine <tux@pinguru.net>
  *  Gilbert Morgan <gmm@tutanota.com>
  *  Goran Lowkrantz <glz@hidden-powers.com>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Groovis <groovis@groovis.net>
  *  Gruen Christian <kiki@bsdro.org>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Guangyuan Yang <ygy@FreeBSD.org>
  *  Guixing Bai <khsing.cn@gmail.com>
  *  Guy P.
  *  Helmut Ritter <freebsd-ports@charlieroot.de>
  *  Henk van Oers <hvo.pm@xs4all.nl>
  *  Henrik Brix Andersen <brix@FreeBSD.org>
  *  Henrik Brix Andersen <henrik@brixandersen.dk>
  *  Henrik Motakef <henrik.motakef@web.de>
  *  Herve Quiroz <hq@FreeBSD.org>
  *  Hiten Pandya <hiten@uk.FreeBSD.org>
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hubert Tournier <hubert@frbsd.org>
  *  Hugo Leisink
  *  Hung-Yi Chen <gaod@hychen.org>
  *  Hye-Shik Chang <perky@python.or.kr>
  *  Igor Vinokurov <igor@zynaps.ru>
  *  Ilia Skalozubov <freebsd@skinc.ru>
  *  J.R. Oldroyd <fbsd@opal.com>
  *  Jacob Atzen <jatzen@gmail.com>
  *  Jacques Marneweck <jacques@php.net>
  *  James Bailie <jimmy@mammothcheese.ca>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  James White <whitejv81@gmail.com>
  *  Janos.Mohacsi@bsd.hu
  *  Jason Helfman <jgh@FreeBSD.org>
  *  Javier Martin Rueda <jmrueda@diatel.upm.es>
  *  Jean Milanez Melo <jmelo@FreeBSD.org>
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jeremie Le Hen <jlh@FreeBSD.org>
  *  Jeremy Chadwick <koitsu@FreeBSD.org>
  *  Jeremy Shaffner <jeremy@external.org>
  *  Jev Björsell <ports@ecadlabs.com>
  *  Jim Riggs <ports@christianserving.org>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Jin-Sih Lin <linpct@gmail.com>
  *  Jochen Neumeister <joneum@FreeBSD.org>
  *  Joe Horn <joehorn@gmail.com>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johann Visagie <wjv@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Chen <johnpupu@gmail.com>
  *  John Hixson <john@ixsystems.com>
  *  John von Essen
  *  Jon Nistor <nistor@snickers.org>
  *  Jonathan Pater <cowboyneal@gmail.com>
  *  Jonathan Weiss (<jw@innerewut.de>)
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Jose Garcia Juanino <jjuanino@gmail.com>
  *  Josef El-Rayes <j.el-rayes@daemon.li>
  *  Joseph Benden <joe@thrallingpenguin.com>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Joseph Scott (<joseph@randomnetworks.com>)
  *  Joseph Scott <joseph@randomnetworks.com>
  *  Juergen Lock <nox@FreeBSD.org>
  *  Jui-Nan Lin <jnlin@csie.nctu.edu.tw>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Julien Laffaye <jlaffaye@FreeBSD.org>
  *  JunSeon Oh <hollywar@mail.holywar.net>
  *  Juraj Lutter <juraj@lutter.sk>
  *  Justin Hawkins <justin@hawkins.id.au>
  *  Jyun-Yan You <jyyou@cs.nctu.edu.tw>
  *  Kazumasa Nishizawa <k_nishizawa@anet.ne.jp>
  *  Keith Gaughan <k@stereochro.me>
  *  Kelly Yancey <kbyanc@posi.net>
  *  Ken McGlothlen <ken.mcglothlen@gmail.com>
  *  Kevin Golding <ports@caomhin.org>
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Kim Scarborough <user@unknown.nu>
  *  Kimo <kimor79@yahoo.com>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Kirill Ponomarew <ponomarew@oberon.net>
  *  Konstantin Menshikov <kostjnspb@yandex.ru>
  *  Koop Mast <einekoai@chello.nl>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kozlov Sergey <kozlov.sergey.404@gmail.com>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Kristaps Kulis <kristaps.kulis@gmail.com>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Kurt Lidl (kurt.lidl@cello.com)
  *  Kurt Lidl <kurt.lidl@cello.com>
  *  Kyle Evans <kevans@FreeBSD.org>
  *  Lars Balker Rasmussen <lbr@FreeBSD.org>
  *  Lars Eggert <lars.eggert@gmx.net>
  *  Lars Eggert <larse@isi.edu>
  *  Lars Thegler <lars@thegler.dk>
  *  Lars Thegler <lth@FreeBSD.org>
  *  Lawrence Chen <beastie@tardisi.com>
  *  Li-Wen Hsu <lwhsu@FreeBSD.org>
  *  Li-Wen Hsu <lwhsu@lwhsu.org>
  *  Loic Blot <loic.blot@unix-experience.fr>
  *  Loren M. Lang <loren@north-winds.org>
  *  Luca Pizzamiglio <pizzamig@FreeBSD.org>
  *  Lukasz Stelmach <lukasz.stelmach@iem.pw.edu.pl>
  *  Lukasz Wasikowski <lukasz@wasikowski.net>
  *  Lung-Pin Chang <changlp@cs.nctu.edu.tw>
  *  MANTANI Nobutaka <nobutaka@nobutaka.com>
  *  MIHIRA Yoshiro <sanpei@FreeBSD.org>
  *  Manuel Kasper <mk@neon1.net>
  *  Manuel Rábade <mig@mig-29.net>
  *  Marc G. Fournier
  *  Marc G. Fournier <scrappy@hub.org>
  *  Marcello Coutinho
  *  Marcin Cieslak <saper@SYSTEM.PL>
  *  Marek Holienka <marekholienka@gmail.com>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark Huizer; Eindhoven
  *  Mark Pulford <mark@kyne.com.au>
  *  Martin Matuska <martin@matuska.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Waschbuesch <martin@waschbuesch.de>
  *  Martin Wilke (miwi@FreeBSD.org)
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Masafumi NAKANE <max@FreeBSD.org>
  *  Masahiro Teramoto <markun@onohara.to>
  *  Masaki TAGAWA <masaki@club.kyutech.ac.jp>
  *  Mathias Monnerville <mathias@monnerville.com>
  *  Mathieu Arnold <m@absolight.net>
  *  Matthew Seaman
  *  Matthew Seaman <m.seaman@infracaninophile.co.uk>
  *  Matthew Seaman <matthew@FreeBSD.org>
  *  Matthew X. Economou <xenophon+fbsdports@irtnog.org>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Maurice Castro <maurice@castro.aus.net>
  *  Max N. Boyarov <m.boyarov@bsd.by>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Maxime Henrion (mux@FreeBSD.org)
  *  Meno Abels <meno.abels@adviser.com>
  *  Michael Capp <myntric@exeonline.com>
  *  Michael Fausten <ports@michael-fausten.de>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael L. Hostbaek (mich@freebsdcluster.org)
  *  Michael Moll <kvedulv at kvedulv.de>
  *  Michael Moll <kvedulv@kvedulv.de>
  *  Michael Ranner <mranner@inode.at>
  *  Michael Schout <mschout@gkg.net>
  *  Michael Vasilenko <acid@stu.cn.ua>
  *  Mike Meyer
  *  Mikhail T. <michael@fun-box.ru>
  *  Mikhail Teterin <mi@aldan.algebra.com>
  *  Mitchell Smith <mjs@bur.st>
  *  Mitsuru Yoshida <mitsuru@riken.go.jp>
  *  Moggie <moggie@elasticmind.net>
  *  Mohammad S. Babaei <info@babaei.net>
  *  Mons Anderson <mons@cpan.org>
  *  Muhammad Moinur Rahman <5u623l20@gmail.com>
  *  Muhammad Moinur Rahman <bofh@FreeBSD.org>
  *  Mun-Kyo Seo <munggo@pmy.lv>
  *  Munish Chopra <mchopra@engmail.uwaterloo.ca>
  *  Murilo Opsfelder <mopsfelder@gmail.com>
  *  Mykola Marzhan <delgod@portaone.com>
  *  Naram Qashat <cyberbotx@cyberbotx.com>
  *  Neil Blakey-Milner
  *  Neil Blakey-Milner <nbm@FreeBSD.org>
  *  Nick Hilliard <nick@foobar.org
  *  Nick Hilliard <nick@foobar.org>
  *  Nicola Stanislao Vitale <nivit@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Nicolas de Bari Embriz Garcia Rojas <nbari@tequila.io>
  *  Nicole Reid <root@cooltrainer.org>
  *  Oddbjorn Steffensen <oddbjorn@tricknology.org>
  *  Oleg Mamontov <oleg@mamontov.net>
  *  Oleg Pudeyev <oleg@bsdpower.com>
  *  Oleg Sidorkin <osidorkin@gmail.com>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Olivier Duchateau
  *  Olivier Duchateau <duchateau.olivier@gmail.com>
  *  Paul Schmehl <pauls@utdallas.edu>
  *  Pavel Timofeev <timp87@gmail.com>
  *  Pete Fritchman <petef@databits.net>
  *  Peter <peter@vereshagin.org>
  *  Peter Avalos <pavalos@theshell.com>
  *  Peter Lai <cowbert@gmail.com>
  *  Peter Libassi <peter@libassi.se>
  *  Peter Pentchev <roam@FreeBSD.org>
  *  Peter Schuller <peter.schuller@infidyne.com>
  *  Peter Wemm <peter@netplex.com.au>
  *  Phil Phillips
  *  Philip M. Gollucci <pgollucci@p6m7g8.com>
  *  Philip Paeps <philip@FreeBSD.org>
  *  Philippe Audeoud <jadawin@tuxaco.net>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Qing Feng <qingfeng@douban.com>
  *  Radim Kolar <hsn@sanatana.dharma>
  *  Ralf Gebhart <gebhart@secnetix.de>
  *  Renaud Chaput <renchap@cocoa-x.com>
  *  René Ladan <rene@FreeBSD.org>
  *  René Ladan <rene@freebsd.org>
  *  Richard Gallamore <ultima@FreeBSD.org>
  *  Richard Neese <r.neese@gmail.com>
  *  Ricky E. <codeblock@eighthbit.net>
  *  Rink Springer <rink@FreeBSD.org>
  *  Robert Gogolok <gogo@cs.uni-sb.de>
  *  Rod Taylor <ports@rbt.ca>
  *  Rodrigo Nicola Lombardo <rodnic@gmail.com>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Rozhuk Ivan 2019 <rozhuk.im@gmail.com>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Ryan T. Dean <rtdean@cytherianage.net>
  *  Sahil Tandon <sahil@tandon.net>
  *  Scott Sanders <scott@jssjr.com>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Kozlov <kozlov.sergey.404@gmail.com>
  *  Sergey Matveychuk <sem@FreeBSD.org>
  *  Sergey Osipov <sipopo@yandex.ru>
  *  Sergey Osokin <osa@FreeBSD.org>
  *  Sergey Osokin aka oZZ <ports@FreeBSD.org>
  *  Sergey Samoyloff <gonza@techline.ru>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Seth Kingsley <sethk@meowfishies.com>
  *  Shaun Amott <shaun@FreeBSD.org>
  *  Shigeyuki Fukushima <shige@FreeBSD.org>
  *  Shinsuke Matsui <smatsui@karashi.org>
  *  Simon 'corecode' Schubert <corecode@corecode.ath.cx>
  *  Simon Dick <simond@irrelevant.org>
  *  Simun Mikecin <numisemis at yahoo.com>
  *  Sir l33tname <sirl33tname@gmail.com>
  *  Sofian Brabez <sbrabez@gmail.com>
  *  Soren Dossing <sauber@netcom.com>
  *  Stanislav Sedov <stas@FreeBSD.org>
  *  Stefan Bethke <stb@lassitu.de>
  *  Stefan Esser <se@FreeBSD.org>
  *  Stefan Hagen <ports@textmail.me>
  *  Stefan `Sec` Zehl <sec@42.org>
  *  Stephane Legrand <stephane@freebsd-fr.org>
  *  Steve Polyack <spolyack@collaborativefusion.com>
  *  Steve Wills <steve@mouf.net>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steve Wills <swills@freebsd.org>
  *  Steven Kreuzer
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@exit2shel.com>
  *  Steven Kreuzer <skreuzer@exit2shell.com>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sutra Zhou <zhoushuqun@gmail.com>
  *  Søren Straarup <xride@x12.dk>
  *  TAKAHASHI Kaoru <kaoru@kaisei.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  TAKATSU Tomonari <tota@rtfm.jp>
  *  TERAMOTO Masahiro <markun@onohara.to>
  *  Thierry Thomas (<thierry@FreeBSD.org>)
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Sandford <freebsduser@paradisegreen.co.uk>
  *  Thomas Zander <riggs@FreeBSD.org>
  *  Thomas-Martin Seck <tmseck@netcologne.de>
  *  Thomas-Martin Seck <tmseck@web.de>
  *  Tobias Rehbein <tobias.rehbein@web.de>
  *  Tom Hukins <tom@FreeBSD.org>
  *  Tom Judge <tj@FreeBSD.org>
  *  Tom McLaughlin <tmclaugh@sdf.lonestar.org>
  *  Tomoyuki Sakurai <cherry@trombik.org>
  *  Torsten Zuehlsdorff <ports@toco-domains.de>
  *  Torsten Zuehlsdorff <tz@FreeBSD.org>
  *  Torsten Zuhlsdorff <ports@toco-domains.de>
  *  Torsten Zühlsdorff <ports@toco-domains.de>
  *  Travis Campbell <hcoyote@ghostar.org>
  *  Trevor Caira <trevor@bitba.se>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Tuc <freebsd-ports@t-b-o-h.net>
  *  Ultima
  *  Vanilla I. Shu <vanilla@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vivek Khera <vivek@khera.org>
  *  Vladimir Timofeev <vovkasm@gmail.com>
  *  Vsevolod Stakhov
  *  Wen Heping
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen Heping<wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>)
  *  Will Andrews <andrews@technologist.com>
  *  William Grzybowski <william88@gmail.com>
  *  Xavier Beaudouin <kiwi@oav.net>
  *  Yasuhiro Fukuma <yasuf@big.or.jp>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Yi-Hsuan Hsin <mhsin@mhsin.org>
  *  Yi-Jheng Lin <yzlin@cs.nctu.edu.tw>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@csie.nctu.edu.tw>
  *  Yoshiro MIHIRA <sanpei@FreeBSD.org>
  *  Yuan-Chung Hsiao <ychsiao@ychsiao.idv.tw>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Zach Thompson <hideo@lastamericanempire.com>
  *  Zach Thompson <lin-chi@lastamericanempire.com>
  *  Zahatski Aliaksandr <zag@cpan.org>
  *  Zane C, Bowers-Hadley <vvelox@vvelox.net>
  *  Zhen REN <bg1tpt@gmail.com>
  *  Zhihao Yuan <lichray@gmail.com>
  *  aaron@FreeBSD.org
  *  ache
  *  ache@FreeBSD.org
  *  alex@kapranoff.ru
  *  anders
  *  andrew@scoop.co.nz
  *  andrey@kostenko.name
  *  antoine@FreeBSD.org
  *  arved
  *  babak@farrokhi.net
  *  bf <bf2006a@yahoo.com>
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  chinsan <chinsan.tw@gmail.com>, Gea-Suan Lin <gslin@gslin.org>
  *  chinsan <chinsan@mail2000.com.tw>
  *  chinsan <chisnan.tw@gmail.com>
  *  citrin+bsd@citrin.ru
  *  cjr@cruwe.de
  *  clement
  *  clive
  *  clsung
  *  clsung@dragon2.net
  *  coryking
  *  cpm
  *  dom@happygiraffe.net
  *  dsh@vlink.ru
  *  fabian.freyer@physik.tu-berlin.de
  *  gahr
  *  genserg@hotmail.com
  *  gugu
  *  hrs@FreeBSD.org
  *  ijliao
  *  janos.mohacsi@bsd.hu
  *  jfitz
  *  johnpupu <johnpupu@gmail.com>
  *  jupengfei <jupengfei@gmail.com>
  *  k@123.org
  *  kbyanc
  *  kftseng@iyard.org
  *  koshy@india.hp.com
  *  kstailey
  *  lars.eggert@gmx.net
  *  lbr
  *  lbr@FreeBSD.org
  *  lev@FreeBSD.org
  *  mahlon
  *  maintainer.freebsd@xpoundit.com
  *  mbr@FreeBSD.org
  *  milki <milki@rescomp.berkeley.edu>
  *  mjhsieh
  *  mons
  *  mt@primats.org.ua
  *  mwlucas
  *  niels <niels@FreeBSD.org>
  *  nik
  *  nork@cityfujisawa.ne.jp
  *  otaviof@gmail.com
  *  pauls@utdallas.edu
  *  ports@c0decafe.net
  *  ports@c0decafe.net <ports@c0decafe.net>
  *  rene@FreeBSD.org
  *  sada
  *  stas
  *  thierry@pompo.net
  *  thinker <thinker@branda.to>
  *  tobez@plab.ku.dk
  *  toni.viemero@iki.fi
  *  torstenb
  *  tundra
  *  uwe.pierau@tu-clausthal.de
  *  vanilla
  *  vanilla@
  *  will
  *  wollman
  *  wosch@FreeBSD.org
  * # Created by Markus Mann, CTS - FreeBSD Team <de-freebsd@ctseuro.com>

With hat:	portmgr

www/py-scrapy: Update to version 2.5.1

Security Bug Fix:

If you use HttpAuthMiddleware (i.e. the http_user and http_pass spider
attributes) for HTTP authentication, any request exposes your credentials to
the request target.

To prevent unintended exposure of authentication credentials to unintended
domains, you must now additionally set a new, additional spider attribute,
http_auth_domain, and point it to the specific domain to which the
authentication credentials must be sent.

If the http_auth_domain spider attribute is not set, the domain of the first
request will be considered the HTTP authentication target, and authentication
credentials will only be sent in requests targeting that domain.

If you need to send the same HTTP authentication credentials to multiple
domains, you can use w3lib.http.basic_auth_header() instead to set the value of
the Authorization header of your requests.

If you really want your spider to send the same HTTP authentication credentials
to any domain, set the http_auth_domain spider attribute to None.

Finally, if you are a user of scrapy-splash, know that this version of Scrapy
breaks compatibility with scrapy-splash 0.7.2 and earlier. You will need to
upgrade scrapy-splash to a greater version for it to continue to work.

www/py-scrapy: Add CPE information

Approved by:    portmgr (blanket)

www/py-scrapy: Update to 2.5.0

Changelog:	https://docs.scrapy.org/en/latest/news.html?highlight=news#scrapy-2-5-0-2021-04-06

This also removes/disables the experimental HTTP/2 support, there are
issues with Twisted and h2 at this moment which breaks scrapy.

PR:		256259
Approved by:	maintainer timeout (skreuzer)

Remove # $FreeBSD$ from Makefiles.

Drop python 2.7 support from a few ports

With hat:	portmgr

Bump a few PORTREVISIONs after r498529

With hat:	portmgr

textproc/py-scrapy: Fix the dependency version

PR:		235471
Submitted by:	wen
Approved by:	portmgr (port compliance)

Fix typo in RUN_DEPENDS

Require py-parsel >= 1.2.0

Update to 1.6.0

PR:		235471
Submitted by:	yuri@

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

www/py-scrapy: Add USE_PYTHON=concurrent

Approved by:	portmgr

Convert Python ports to FLAVORS.

Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

Fix dependencies

PR:		219311
Submitted by:	Eric Camachat <eric@camachat.org>

Update to 1.3.3

PR:		219212
Submitted by:	Daniel Ylitalo

Update to version 1.1.1

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Remove UNIQUENAME and LATEST_LINK.

UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.

Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.

Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)

Reviewed by:	antoine, bapt
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3336

Adopt port

- Convert USE_PYTHON to new USES in www/

With hat:	python@

Reset maintainership: - Lots of maintainers timeout - unresponsive for almost a year

PR:		195059

Update to version 0.22.2

PR:		189719
Submitted by:	amim.knabben@gmail.com
Approved by:	maintainer timeout (clsung, 28 weeks)

- Stage support - Convert to PYDISTUTILS_AUTOPLIST - Bump PORTREVISION

Python cleanup: - USE_PYTHON* = 2.X -> USE_PYTHON* = 2 - USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes Reviewed by:	python (mva, rm) Approved by:	portmgr-lurkers (mat)

New USES=twisted, to replace the old USE_TWISTED knob.

twisted can be configured with the arguments run or build to replace
the previous USE_TWISTED_RUN and USE_TWISTED_BUILD knobs. The twisted
components can be added as comma-separated arguments. If you previously
wrote
    USE_TWISTED=        yes
    USE_TWISTED=        conch names
    USE_TWISTED_RUN=    yes
you now would write
    USES=       twisted
    USES=       twisted:conch,names
    USES=       twisted:run

Add NO_STAGE all over the place in preparation for the staging support (cat: www)

- Update to 0.16.5

- Update to 0.16.4

- update to 0.16.2 - trim Makefile header - remove indefinite article from COMMENT - add LICENSE - remove not needed BUILD_DEPENDS - depend on TwistedCore via USE_TWISTED_RUN instead of direct dependency on meta-port - convert to optionsng - convert PYTHON_SITELIBDIR usage with PYTHON_PKGNAMEPREFIX

PR:		173661
Submitted by:	rm (myself)
Approved by:	maintainer timeout (2 weeks+)
Feature safe:	yes

- Unbreak - take maintainership

PR:		ports/162557
Submitted by:	clsung
Approved by:	maintainer (qingfeng_AT_douban.com)
Feature safe:	yes

- Mark BROKEN: does not compile

Reported by:	pointyhat

Update to version 0.12.0.2542, change maintainer email address to a new one.

PR:		ports/158370
Submitted by:	maintainer