www/py-urlwatch 2.29_3

*/*: switch dependency from devel/py-lxml5 to devel/py-lxml

Currently, there are two versions of python XML processing library
which conflict each other in the ports tree, namely:
- devel/py-lxml5 (now at version 5.4.0)
- devel/py-lxml  (now at version 6.0.1)

To avoid the situation that some ports depend on py-lxml5 and some
others do on py-lxml (by switching dependencies individually), this
commit switches the dependencies from py-lxml5 to py-lxml at once.

Additional note: There are still two ports (textproc/py-rdflib and
www/py-draftjs-exporter) depending on py-lxml5 since they limit upper
version to less than 6.

PR:		289491
Approved by:	Michiel van Baak Jansen <michiel@vanbaak.eu>, arrowd,
		crees, madpilot, delphij, marcus, nivit, kai,
		skreuzer, fluffy, bofh, thierry, stephen, sunpoet,
		0mp, Eric Camachat <eric@camachat.org>

*/*: update dependency on devel/py-lxml to devel/py-lxml5 (2nd attempt)

This is a follow up to the commit 230fb2661c78, which updated some
ports' dependencies on devel/py-lxml to devel/py-lxml5. It was an
attempt to follow the dependency change of
www/py-beautifulsoup. However, the switch was incomplete and broke
some other ports.

It has turned out that the ports depending on devel/py-lxml (at
version 4.9.3) does not limit their dependencies' upper bound to 4.x
except for one (devel/py-pymaven-patch). So updating them to
devel/py-lxml5 (at version 5.4.0) should cause no harm.

This commit switch dependencies of all the ports (except
devel/py-pymaven-patch) to devel/py-lxml5 avoid potential conflicts.

Co-authored-by: Daniel Engberg <diizzy@FreeBSD.org>

PR:		287144, 288047
Reported by:	makc (via ports-committers),
		vvd (PR 288047),
		diizzy (PR 287144)
Approved by:	portmgr (chase dependency change, unbreak build)
Fixes:		230fb2661c78 (*/*: update dependency on devel/py-lxml to devel/py-lxml5)

python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal

Any missed ports, feel free to bump.

Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.

www/py-urlwatch: Update to 2.29

Changelog:

https://github.com/thp/urlwatch/blob/2.29/CHANGELOG.md

devel/py-pyyaml: Move devel/py-yaml to devel/py-pyyaml

- Bump PORTREVISION of dependent ports for dependency change

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

www/py-urlwatch: Update to 2.28

Changelogs since 2.26:

https://github.com/thp/urlwatch/blob/2.28/CHANGELOG.md

www/py-urlwatch: Update to 2.26

* Remove no longer required USE_LOCALE as the UTF-8 mode is enabled by
  default when the locale is C since Python 3.7.

* Also migrate from USES=pytest to the preferred USE_PYTHON=pytest
  while I'm here.

Changelog:

https://github.com/thp/urlwatch/blob/2.26/CHANGELOG.md

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

www/py-urlwatch: Attempt to fix intermittent build issues

* If the DOCS option is enabled, the build process occasionally fails.
  Attempt to fix this issue by setting MAKE_JOBS_UNSAFE accordingly.

* No PORTREVISION bump as the package content isn't changed.

Reported by:	pkg-fallout
MFH:		2022Q3

www/py-urlwatch: Switch to USES=pytest

* Adjust/remove relevant entries that are handled by Uses/pytest.mk.

www/py-urlwatch: Update to 2.25

* Fix BUILD if DOCS option is unset as BINARY_ALIAS can only be used if
  textproc/py-sphinx (enabled via the DOCS option) is present.

* Add EXAMPLES option to let users choose to install the supplied
  examples.

Changelog:

https://github.com/thp/urlwatch/blob/2.25/CHANGELOG.md

MFH:		2022Q2

www/py-urlwatch: Update to 2.24

* Remove "-rs" parameter from testsuite as it causes issues with some
  new tests.

Changelog:

https://github.com/thp/urlwatch/blob/2.24/CHANGELOG.md

www/py-urlwatch: update to v2.23, add DOCS

Add DOCS option (uses py-sphinx and GNU make) to build/install
html and text documentation.

Ensure build works for non-default Python flavors.

Update TEST_DEPENDS to list additional self-test requisites.

Changelog: https://github.com/thp/urlwatch/blob/2.23/CHANGELOG.md#223----2021-04-10

PR:		256085

Approved by:	kai@FreeBSD.org

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

www/py-urlwatch: Update to 2.18

* Adjust output of test suite to give a summary about skipped tests as well.

Changelog:

https://github.com/thp/urlwatch/blob/2.18/CHANGELOG.md

New port: www/py-urlwatch

With urlwatch you can watch changes in webpages and get notified (via e-mail,
in your terminal or through various third party services) of any changes.

The change notification will include the URL that has changed and a unified
diff of what has changed.

WWW: https://github.com/thp/urlwatch