25 of 39 on in the package: ARP_ACLAUTH_NISCACHE_DIGESTSDELAY_POOLSDOCSEXAMPLESFOLLOW_XFFFS_AUFSFS_DISKDFS_ROCKGSSAPI_BASEHTCPICAPICMPIPV6KQUEUELARGEFILELAX_HTTPSNMPSSLSSL_CRTDTP_IPFWVIA_DBWCCPWCCPV2Show the 14 options that are off
o You can find the configuration files for this package in the
directory /usr/local/etc/squid.
o The default cache directory is /var/squid/cache/.
The default log directory is /var/log/squid/.
Note:
You must initialize new cache directories before you can start
squid. Do this by running "squid -z" as 'root' or 'squid'.
If your cache directories are already initialized (e.g. after an
upgrade of squid) you do not need to initialize them again.
o When using DiskD storage scheme remember to read documentation:
http://wiki.squid-cache.org/Features/DiskDaemon
and alter your kern.ipc defaults in /boot/loader.conf. DiskD will not
work reliably without this. Last recomendations were:
kern.ipc.msgmnb=8192
kern.ipc.msgssz=64
kern.ipc.msgtql=2048
o The pre-translated error pages are no longer included into the port.
If you need them install www/squid-langpack port as well.
o The default configuration will deny everyone but the local host and
local networks as defined in RFC 1918 for IPv4 and RFCs 4193 and
4291 for IPv6 access to the proxy service. Edit the "http_access
allow/deny" directives in /usr/local/etc/squid/squid.conf
to suit your needs.
o If AUTH_SQL option is set, please, don't forget to install one of
following perl modules depending on database you like:
databases/p5-DBD-mysql (MySQL)
databases/p5-DBD-mysql4 (MariaDB)
databases/p5-DBD-Pg
databases/p5-DBD-SQLite
To enable Squid, set squid_enable=yes in either
/etc/rc.conf, /etc/rc.conf.local or /etc/rc.conf.d/squid
Please see /usr/local/etc/rc.d/squid for further details.
Note:
If you just updated your Squid installation from an earlier version,
make sure to check your Squid configuration against the 3.4 default
configuration file /usr/local/etc/squid/squid.conf.sample.
/usr/local/etc/squid/squid.conf.documented is a fully annotated
configuration file you can consult for further reference.
Additionally, you should check your configuration by calling
'squid -f /path/to/squid.conf -k parse' before starting Squid.
Packages by version and architecture
latest
FreeBSD version
amd64
aarch64
i386
FreeBSD 16
7.7
7.7
–
FreeBSD 15
7.7
7.7
–
FreeBSD 14
7.7
7.7
7.7
quarterly (2026Q4)
FreeBSD version
amd64
aarch64
i386
FreeBSD 15
7.7
7.7
–
FreeBSD 14
7.7
7.7
7.7
version as in the ports tree (latest) or the most common one (quarterly) · different version · ✗ not built · – no packages for this platform. Package sets that have not been rebuilt for 60 days are left out.
Unaddressed and VuXML only (0)
No unaddressed CVE and nothing reported by pkg audit for the packaged version 7.7.
Fixed (45)
Show 45 fixed
VuXML entries whose affected range the packaged version has left.
Problem reports (0) · open in Bugzilla, most recently changed first
None.
Commits (428)
Sergei Kolobov (sergei) · 2.5.4_9
- integrate a new patch from squid-cache.org, see http://www.squid-cache.org/Versions/v2/2.5/bugs/#squid-2.5.STABLE4-ftp_telnet for details - integrate a patch by Glen Gibb to enable ARP based ACLs and make this an OPTION; see also http://www.squid-cache.org/bugs/show_bug.cgi?id=909 for his original bug report - integrate additional vendor patches - make --enable-underscores an OPTION - se
PR: ports/62442
Submitted by: maintainer
- Fix checksum for updated errorpages patch
PR: ports/62923
Submitted by: Michal Pasternak <dotz@irc.pl>
Approved by: maintainer
- Update distinfo for the http_workarounds patch (again) Please see http://www.squid-cache.org/bugs/show_bug.cgi?id=890 for details. Bump PORTREVISION - Update to use new ports collection features: + USE_SIZE + use PORTDOCS and PLIST_FILES and extend the dynamic package list creation to include squid's icon files, too + move file and directory cleanup on deinstallation to pkg-deinsta
PR: ports/62222
Submitted by: maintainer
- integrate another patch from squid-cache.org, see http://www.squid-cache.org/Versions/v2/2.5/bugs/ for details - cleanup dynamic plist generation: sort files, replace needlessly complex ex-scripting with a ${REINPLACE_CMD} one-liner - integrate a patch to make the SMB-NTLM helper compile on 5.x and hook this helper up to the build (thanks to Stefano Tagliaferri for reporting the bug an
PR: 61543
Submitted by: maintainer
- configure squid to run under a dedicated "squid" user by default; make use of SQUID_{UID,GID} which other squid-related ports already implemented. The user/group will be created on the fly if they do not already exist. - introduce WITH_SQUID_LDAP_AUTH to pull in the necessary bits to compile and use the ldap_auth helper - install some more authentication helper applications by default - in
PR: 61315
Submitted by: maintainer
- Integrate another patch for the LDAP authentication helper (see <http://www.squid-cache.org/Versions/v2/2.5/bugs/> for details) - Correct MASTER_SITES: + fix URL for Melbourne University's ftp server + replace unreachable ftp mirror at Loughborough University with the one at LEO.org, Munich - Bump PORTREVISION
PR: 61128
Submitted by: maintainer
- Integrate a new patch issued by the squid development team to correct the behaviour of the LDAP authentication helper wrt TLS, see <http://www.squid-cache.org/Versions/v2/2.5/bugs/> for details - Reinstate the errorpages.patch and work around its partial brokenness by installing some Lithuanian error pages manually. - Bump PORTREVISION
PR: 60950
Submitted by: maintainer
More patches for squid, to keep up to date with the squid distribution.
Submitted by: Thomas-Martin Seck <tmseck@netcologne.de> (privately)
Approved by: maintainer timeout (still)
[PATCH] www/squid: update to 2.5 STABLE 4
- Update to 2.5-STABLE4
- plist is correct -- see ports/56392 for details on extra files
PR: ports/56926
Submitted by: Jonathan Noack <noackj@concordiacrusaders.org>
Approved by: MAINTAINER TIMEOUT
Add vendor patches: - fixes for some security issues - fixes for Samba 2.2.6 or later - fixes for OpenSSL 0.9.7 or later - performance fixes - reliability fixes - stability fixes - documentation fixes - fixes/improvements for OpenLDAP 2.1.x or later - ...
Have a look at http://www.squid-cache.org/Versions/v2/2.5/bugs/ for a
more detailed description.
Maintainer timeout after: ~3 months
Submitted by: marius@alchemy.franken.de
Approved by: kris
Half of these ones missed yesterday while converting to USE_REINPLACE. The other half needs perl to build.
Noticed on bento and others (full mailbox :-)
Update the port to squid-2.5.stable1.
Notable features:
* I'm building _all_ of the error page languages now
* I'm building a handful of the helper modules (the ones that don't
require ldap or samba to be installed)
* underscores in hostnames are enabled - every few weeks we squid people
get emails asking why someone can't get to some_user.geocities.com .
Bad geocities. :)
Update the port to squid-2.4STABLE3.
From the ChangeLog:
Changes to Squid-2.4.STABLE3 (Nov 28, 2001):
- Fixed bug #255: core dump on SSL/CONNECT if access denied by
miss_access
- Fixed bug #246: corrupt on-disk meta information preventing
rebuilds of lost swap.state files
- Fixed bug #243: squid_ldap_auth now supports spaces in passwords
- Fixed a coredump when creating FTP directories
- Fixed a compile time problem with statHistDump prototype
mistmatch, reported by some compilers
- Fixed a potential coredump situation on snmpwalk in certain
configurations
- Fixed bug #229: filedescriptor leakage in the "aufs" cache_dir
store implementation
- Serbian error message translations
Remove the RunCache stuff and let squid handle its own child maintainence. This now means that 'stop' as an argument works correctly, and doesn't end up having squid restarted.
I've added some sleep code to wait for squid to complete its shutdown,
but I have commented it out for the time being as I don't know whether
its good practice to have your machine sleep during shutdown.
I'll research it some more. :)
Misc. fixes:
* Sort pkg-plist
* Replace %B%f with %B/%f (%B does not contain the trailing '/')
* Rewrote tests using || rather than &&. With &&, if the condition fails
then the test returns false, and sysinstall's pkg_add would fail at
install time.
Add some PATCHFILES to this port, and bump its PORTREVISION.
I ran off and updated the patch files on the squid website for 2.4.stable1,
and then updated this port to use them.
Note that diskd is still broken here - I haven't actually
committed a fix to squid yet .. :-P
-pthread --> ${PTHREAD_LIBS} -D_THREAD_SAFE --> ${PTHREAD_CFLAGS}
Note: my first intention was to test this out on bento/beta, but per ade's
requiest I opted to do it quickly.
PR: 26059
Update the squid-2.4 port to actually _be_ squid-2.4 . Phew.
This port builds, installs, packages, pkg_delete's cleanly.
I'm going to run it through some more linting and tidying up before
I'm completely done with it.
Differences from squid22/squid23 :
* install-pinger isn't built. I'll tackle this later, possibly by creating
a squid user/group. I don't like having suid binaries installed,
even more so when 99% of the users of this port won't even enable
ICMP pinging.
* I've enabled the lru and heap replacement policies. LRU is used by
default, the beauty here is that the user can choose one or the other
without needing a recompile.
* I've enabled ufs (sync), diskd (async) and null (no caching, only proxying).
This again lets users choose what they want without needing a recompile.
The default is still a 100mb cache in /usr/local/squid/cache/ running
ufs. I would change it to diskd but if the user hasn't tweaked their
sysV shm/msg parameters sufficiently they'll just be puzzled when squid
gives mysterious sysV errors (and if they load it up enough to have UFS
become an issue, they'd be better off reading the squid FAQ anyhow..)
As threatened on freebsd-ports: all startup scripts know about the two options `start' and `stop' now (unless I have forgotten any). This allows us to call the scripts from /etc/rc.shutdown with the correct option.
The (42 or so) ports that already DTRT before are unchanged.
Add an official patch.
Synopsis:
"If you fill up your squid cache, CPU will go to 100% but the cache will not be
cleaned up."
PR: 18920
Submitted by: Mike Harding <mvh@ix.netcom.com>
Obtained from: http://www.squid-cache.org/Versions/v2/2.3/bugs/