x11-drivers/xf86-input-vmmouse 13.1.0_7

Mk/Uses/xorg-cat.mk: Resurrect CATEGORIES=proto and switch EXTRACT_SUFX to xz

Resurrect CATEGORIES=proto to simplify the port's Makefile.
Remove experimental from the meson's comment, as some ports have fully
transitioned to building with Meson.
Upstream has switched from bz2 to xz, so update EXTRACT_SUFX.

PR:		298092
Approved by:	x11 (arrowd)
Approved by:	fluffy (mentor)

x11-drivers/xf86-input-vmmouse: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

xorg: bump revision of drivers after xorg-server upgrade

The internal ABI has been bumped

x11-drivers: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Florent Thoumie <flz@freebsd.org>
  *  Gleb Smirnoff <glebius@FreeBSD.org>
  *  NIIMI Satoshi <sa2c@sa2c.net>
  *  lesi@FreeBSD.org

With hat:	portmgr

Style: improve ONLY_FOR_ARCHS_REASON (grammar, markup, etc.)

ONLY_FOR_ARCHS_REASON is used as part of the sentence and thus should
start with lower-case letter and not end with a period which is added
by the framework, similar to other knobs like BROKEN, IGNORE, et al.

While here, remove needless quoting, add missing Oxford comma, expand
contractions and jargonisms, use correct spelling for proper names.

Remove # $FreeBSD$ from Makefiles.

libhal is actually not a dependency of this port

This port used to install 2 files for the hal deamon which are now actually
useless as the hal deamon is not used anymore by the software which might be
interested in vmmouse probes.

Update xorg x11 servers to 1.20.7

Update xorg x11 servers to 1.20.7.  This updates x11-servers/xorg-server,
xephyr, xorg-dmx, xorg-nestserver, xorg-vbserver and xwayland.

Enable the UDEV backend by default, instead of the DEVD backend, for
autoconfiguration of input devices on FreeBSD 12 and later.
FreeBSD 11 lacks the needed support in base and will keep on using the DEVD
backend.
Support for the HAL backend is dropped completely, it has been deprecated
for a long time.
Update and improve the DEVD backend.
Add a pkg message about sysctl configuration that might be needed when using
UDEV.

Use the upstream fix for glamour issues.

Use evdev xkb rules by default in xwayland [2]

Add x11-drivers/xf86-input-libinput to the list installed by default by
x11-drivers/xorg-drivers.

Fix net/tigervnc-server and emulators/virtualbox-ose

Bump portrevision of all x11 drivers, as well as other ports dependent on
xorg-server.

This represents work by many people over a long period.  These include
wulf, ak, dumbbell, hselasky pete AT nomadlogic DOT org, jbeich, manu,
myself and possibly others (I tried to look through history, but might have
missed people. If so, I am sorry.)

PR:             196678 [1], 244129 [2]
Submitted by:   hselasky, wulf [1], jbeich [2]
Obtained from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xserver-1.20 (in part)

Switch all ports to use USES=xorg-cat

Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

Switch to xorgproto instead of individual packages

Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto.  This update
tracks that change.

* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
  bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
  instead depend on xorgproto.  Bump portrevision.
* Delete the old *proto packages, update MOVED.

PR:		230023
Submitted by:	zeising
Approved by:	portmgr (antoine)
exp-run by:	antoine

Update X.org WWWs

Approved by:	portmgr blanket

Xorg-servers update to 1.18.4 with driver updates and revision bumps.

Update xf86-video-ati to 7.8.0
Update xf86-video-intel to 2.99.917.20170103
Update xf86-input-synaptics to 1.9.0
Update xf86-input-evdev to 2.10.5
Update xf86-video-r128 to 6.10.2
Update xf86-video-rendition to 4.2.6
New port: xf86-video-geode

PR:		214591,216269,214687,214593,214715,216276,216277,216278,216287,
		216288,216292,216298,214560,216299,216300,216301,216302
Approved by:	swills (mentor, portmgr)
Differential Revision:	https://reviews.freebsd.org/D9436

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Xorg-server update to 1.17.2 with related driver updates and bumps.

Update fontproto to 2.1.3.
Update libXfont to 1.5.1.
Update xf86-input-keyboard 1.8.1.
Update xf86-input-vmmouse to 13.1.0.
Update xf86-input-void to 1.4.1.
Update xf86-video-chips to 1.2.6.
Update xf86-video-cirrus to 1.5.3.
Update xf86-video-mach64 to 6.9.5.
Update xf86-video-neomagic to 1.2.9.
Update xf86-video-r128 to 6.10.0.
Update xf86-video-s3virge to 1.10.7.
Update xf86-video-savage to 2.3.8.
Update xf86-video-siliconmotion to 1.7.8.
Update xf86-video-sis to 0.10.8.
Update xf86-video-trident to 1.3.7.
Update xf86-video-vesa to 2.3.4.

* All other xf86-* drivers where bump and/or patched to allow them to
  compile and work with the new xorg-server.
* The ATI-ums driver is removed because the API it depends on was
  removed from the xorg-server.
* Add patch to sunffb to make the lack of XAA non-fatal
  (not build/run tested due to lack of hardware).
* Remove the extra patches in xorg-server for arm. The code seems to
  support it now natively. Please file a bug if this is not the case.
* Update the xorg-server support in virtualbox-ose-additions for vboxmouse. [1]

Submitted by:	jkim@ [1]
Obtained from:	Graphics devel repo

x11-servers/xorg-server: Update to 1.14

The X.Org server has been updated to 1.14. The changes it brings are described
in a post on the Graphics team blog:
http://blogs.freebsdish.org/graphics/2014/11/19/xserver-1-14-update-ready/

The most noticable change is the DEVD input device autodetection backend
which is enabled by default, replacing the HAL backend. The keyboard
layout configuration must be migrated from HAL's .fdi files to X.Org
files. The procedure is explained in the post mentionned above.

Several ports were removed with this update, mainly because they are not
compatible with the X.Org server anymore:
    o  nvidia-driver-71
    o  nvidia-driver-96
    o  xf86-input-egalax
    o  xf86-video-newport
    o  xf86-video-tga

PR:		155696, 181660, 183478 (partially fixed), 188640, 191331
Differential Revision:	https://reviews.freebsd.org/D1337
Submitted by:	ak (most of the work on the DEVD backend), dumbbell, kwm,
		zeising
Tested by:	Many people on freebsd-x11@ and IRC
Reviewed by:	kwm, portmgr (antoine)
Approved by:	kwm, portmgr (antoine)

Update the default version of GCC in the Ports Collection from GCC 4.7.4 to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

When linking a library libA with a library libB using libtool, if libB.la exists, libtool will add all libraries libB.la refers to (dependency_libs field) to the linker command line and store them in the dependency_libs field of libA.la.  So everything that subsequently links with libA will also link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

The FreeBSD x11@ and graphics team proudly presents a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

Support stage

Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0] If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG= to /etc/make.conf to get the old version.

Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0

Fix dissapearing cursor in xf86-video-vmware [2]

Stagify all x11@-owned ports

Bump portrevisions for xf86-* ports due to xserver version change.

Fix fallout from updates where needed.

Thanks to:	all testersi, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/184684 [1], ports/181385 [2]
Submitted by:	Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by:	portmgr (bdrewery), core (jhb) [0]

Add NO_STAGE all over the place in preparation for the staging support (cat: x11-drivers)

The FreeBSD x11 team proudly presents an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.

PR:		ports/177942
Exp-run by:	miwi
Approved by:	portmgr (miwi)

Thanks to all who helped testing!

- Please welcome Xorg 7.5.2

The Xorg Team is pleased to announce the next round of Xorg updates.
       The team created a new flag called WITH_NEW_XORG that users can include
       in /etc/make.conf. This was created for the intel KMS work being done
       althouthough It probably works for other chips. Unfortunately, the intel
       KMS driver will only work on FreeBSD 9(RELENG|STABLE) or 10/HEAD users.
       Older version of FreeBSD will not be supported. Intel users will need
       to patch their source manually with Konstantin?s KMS kernel patch to get
       the newer chips to work. Please carefully read UPDATING entry.

Changes:

        - libdrm 2.4.31 (including KMS support)
        - mesa 7.11.2
        - xorg-server 1.10.6
        - a lot of new Graphic Drivers.

    I would like to thank:

         Koop Mast
         Eitan Adler
         Niclas Zeising
         and all helpers and testers from x11@.

- Remove WITH_FBSD10_FIX, is no longer needed

- Fix build on FreeBSD 10.0

Notes: all x11@ ports fixed for FreeBSD 10

- Get Rid MD5 support

- Please welcome Xorg 7.5.1

The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.

I would like to thank:

	Beat Gaetzi
	Dima Panov
	Koop Mast
	Eitan Adler
	and all Testers.

PR:		ports/147646
		ports/148035
		ports/148744
		ports/150223
		ports/152889
		ports/154457

Update to 12.6.9.

PR:		149153
Submitted by:	Douglas Carmichael <dcarmich@dcarmichael.net>
Approved by:	rnoland, wxs (mentor), kwm (mentor)

- Update to 12.6.7 (which also fix build on new xorg)

- Update to Xorg 7.5

The Intel drivers was patched to work with
the new server. The drivers for Vesa, NV,NVIDIA and
ATI have been tested thoroughfully and seem to work fine.
A complete changelog of Xorg 7.5 can you read here:

http://www.x.org/releases/X11R7.5/

A note to FreeBSD 6.X users: We strongly recommend you
to update your system to 7.x or above.

For updating try

portupgrade -af \*

or:

portmaster -af

Please report any problems and issus to x11 (at) FreeBSD.org.

Thanks to beat@, rnoland@, fluffy@, stas@ and all testers for their help
and Feeback.

Tested by:	Community and 2x exp-runs

Chase xorg-server update and bump driver PORTREVISIONS.

Chase xserver update with driver port bumps.

Chase the Xorg server update and bump ports that depend on it.

- Update X.org ports to 7.4+ (few ports are more recent than the katamari). - Bump PORTREVISION for all ports depending on libglut since the shlib version number went from 4 to 3. - Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't installed anymore. - Couple of ports fixes (mostly missing xorg components added to USE_XORG).

- Limit to i386 and amd64

Approved by:	portmgr (pav)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Add patch to fix mouse pointer coordinates.

PR:		ports/119820
Submitted by:	Hiroto Kagotani <hiroto.kagotani@gmail.com>

Update xf86-input-vmmouse to 12.4.3.

Update distinfo. Previous checksum was for non-official vmmouse release.

See [1] for the announce.

[1] http://lists.freedesktop.org/archives/xorg-announce/2007-September/000403.html

Reported by:	vehemens

Take over maintainership.

Approved by:	maintainer

[maintainer update] x11-drivers/xf86-input-vmmouse: update to 12.4.2

Update x11-drivers/xf86-input-vmmouse to 12.4.2.

PR:		ports/116279
Submitted by:	NIIMI Satoshi <sa2c@sa2c.net>

- Update to 12.4.1

PR:		116004
Submitted by:	NIIMI Satoshi <sa2c@sa2c.net> (maintainer)

This package contains the X.Org xf86-input-vmmouse driver.

PR:		ports/112805
Submitted by:	NIIMI Satoshi <sa2c at sa2c.net>