x11-fonts/py-cffsubr 0.4.0

x11-fonts/py-cffsubr: Update RUN_DEPENDS after x11-fonts/afdko and x11-fonts/py-afdko 5.0.0+ update

- Do not bump PORTREVISION because the package dependencies are unchanged

x11-fonts/py-cffsubr: Update to 0.4.0

Changes:	https://github.com/adobe-type-tools/cffsubr/releases

libxml2: chase libxml soversion bump

x11-fonts/py-cffsubr: Adjust 5a1b97e112821ed12840f97e1b6a68e84570da15

x11-fonts/py-cffsubr: Convert post-patch to EXTRACT_AFTER_ARGS

Reduce I/O by not extract unnecessary files

PR:		278746
Approved by:	portmgr (maintainer timeout, 2+ weeks)

x11-fonts/py-cffsubr: Update to 0.3.0

- Remove PY_SETUPTOOLS: py-setuptools should be used rather than PY_SETUPTOOLS

Changes:	https://github.com/adobe-type-tools/cffsubr/releases

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

x11-fonts/py-cffsubr: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for package change

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

x11-fonts/py-cffsubr: Use tx from x11-fonts/afdko as embedded tx (built from external/afdko)

- Update RUN_DEPENDS: afdko is already RUN_DEPENDS of py-afdko
- Bump PORTREVISION for package change

PR:		270135
Reported by:	Ting-Wei Lan <lantw44@gmail.com>

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

x11-fonts: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Illarionov <littlesavage@rambler.ru>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Ashish Shukla <wahjava@gmail.com>
  *  Babak Farrokhi <babak@farrokhi.net>
  *  Björn König <bkoenig@alpha-tierchen.de>
  *  Brett Taylor
  *  Dave Cottlehuber <dch@skunkwerks.at>
  *  Dejan Lesjak <lesi@FreeBSD.org>
  *  Dennis Herrmann <adox@mcx2.org>
  *  Dominic Marks <dominic.marks@btinternet.com>
  *  Dryice Liu <dryice@liu.com.cn>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Florian Limberger <flo@snakeoilproductions.net>
  *  Guerkan Senguen <gurkan@phys.ethz.ch>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Herbert J. Skuhra <herbert.skuhra@gmx.at>
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Ilya A. Arkhipov <rum1cro@yandex.ru>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Lundberg <johalun0@gmail.com>
  *  Jordan Irwin <antumdeluge@gmail.com>
  *  KOMATSU Shinichiro
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Konstantinos Konstantinidis <kkonstan@daemon.gr>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kuan-Chung Chiu <buganini@gmail.com>
  *  Leland Wang <llwang@infor.org>
  *  Lowell Gilbert <lgfbsd@be-well.ilk.org>
  *  Manuel Giraud <manuel.giraud@gmail.com>
  *  Marcin Cieslak <saper@SYSTEM.PL>
  *  Masaki TAGAWA <masaki@club.kyutech.ac.jp>
  *  Mateusz Piotrowski <0mp@FreeBSD.org>
  *  Matt Lancereau <matt@rimasec.net>
  *  Matthew Seaman
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Hsin <mhsin@mhsin.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Naresh Venkateshappa <nareshov@gmail.com>
  *  Norberto Lopes <nlopes.ml@gmail.com>
  *  Oliver Lehmann <lehmann@ans-netz.de>
  *  Olivier Duchateau <duchateau.olivier@gmail.com>
  *  Pawel Worach
  *  Pedro Giffuni
  *  Pete Fritchman <petef@databits.net>
  *  Piotr Kubaj <pkubaj@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Winston Weinert <winstonw@lavabit.com>
  *  Yoshihiko Sarumaru <mistral@imasy.or.jp>
  *  Zhihao Yuan <lichray@gmail.com>
  *  arrowd <6yearold@gmail.com>
  *  bf <bf@FreeBSD.org>
  *  dburr@FreeBSD.org
  *  erich@FreeBSD.org
  *  giffunip@asme.org
  *  heiner Eichmann <h.eichmann@gmx.de>
  *  mi@aldan.algebra.com
  *  nork@FreeBSD.org
  *  past@ebs.gr
  *  trevor

With hat:	portmgr

x11-fonts/py-cffsubr: Add py-cffsubr 0.2.9.post1

Standalone CFF subroutinizer based on the AFDKO tx tool.

WWW: https://github.com/adobe-type-tools/cffsubr