x11-fonts/sgifonts1.0.1_5

*/*: Remove BROKEN in all ports that uses bsdforge.com for MASTER_SITES

Site is now back up

Reported by:	Jamie Landeg-Jones <jamie@catflap.org>, Chris <portmaster@bsdforge.com>
Approved by:	portmgr (blanket)

*/*: Mark all ports that uses bsdforge.com in MASTER_SITES broken

The domain bsdforge.com has expired, mark all ports that only
uses bsdforge.com as broken (unfetchable). Additionally set ports that
uses bsdforge.com as primary site and have broken mirrors as broken
too as they're also unfetchable.

Approved by:	portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

x11-fonts: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Illarionov <littlesavage@rambler.ru>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Ashish Shukla <wahjava@gmail.com>
  *  Babak Farrokhi <babak@farrokhi.net>
  *  Björn König <bkoenig@alpha-tierchen.de>
  *  Brett Taylor
  *  Dave Cottlehuber <dch@skunkwerks.at>
  *  Dejan Lesjak <lesi@FreeBSD.org>
  *  Dennis Herrmann <adox@mcx2.org>
  *  Dominic Marks <dominic.marks@btinternet.com>
  *  Dryice Liu <dryice@liu.com.cn>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Florian Limberger <flo@snakeoilproductions.net>
  *  Guerkan Senguen <gurkan@phys.ethz.ch>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Herbert J. Skuhra <herbert.skuhra@gmx.at>
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Ilya A. Arkhipov <rum1cro@yandex.ru>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Lundberg <johalun0@gmail.com>
  *  Jordan Irwin <antumdeluge@gmail.com>
  *  KOMATSU Shinichiro
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Konstantinos Konstantinidis <kkonstan@daemon.gr>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kuan-Chung Chiu <buganini@gmail.com>
  *  Leland Wang <llwang@infor.org>
  *  Lowell Gilbert <lgfbsd@be-well.ilk.org>
  *  Manuel Giraud <manuel.giraud@gmail.com>
  *  Marcin Cieslak <saper@SYSTEM.PL>
  *  Masaki TAGAWA <masaki@club.kyutech.ac.jp>
  *  Mateusz Piotrowski <0mp@FreeBSD.org>
  *  Matt Lancereau <matt@rimasec.net>
  *  Matthew Seaman
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Hsin <mhsin@mhsin.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Naresh Venkateshappa <nareshov@gmail.com>
  *  Norberto Lopes <nlopes.ml@gmail.com>
  *  Oliver Lehmann <lehmann@ans-netz.de>
  *  Olivier Duchateau <duchateau.olivier@gmail.com>
  *  Pawel Worach
  *  Pedro Giffuni
  *  Pete Fritchman <petef@databits.net>
  *  Piotr Kubaj <pkubaj@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Winston Weinert <winstonw@lavabit.com>
  *  Yoshihiko Sarumaru <mistral@imasy.or.jp>
  *  Zhihao Yuan <lichray@gmail.com>
  *  arrowd <6yearold@gmail.com>
  *  bf <bf@FreeBSD.org>
  *  dburr@FreeBSD.org
  *  erich@FreeBSD.org
  *  giffunip@asme.org
  *  heiner Eichmann <h.eichmann@gmx.de>
  *  mi@aldan.algebra.com
  *  nork@FreeBSD.org
  *  past@ebs.gr
  *  trevor

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Switch MASTER_SITES and WWW to https in Chris' ports.

PR:		241272
Submitted by:	Chris Hutchinson <portmaster@bsdforge.com> (maintainer)

Convert to UCL & cleanup pkg-message (categories x)

x11-fonts/mkfontscale: Update to 1.2.0

Update x11-fonts/mkfontscale to 1.2.0
Remove x11-fonts/mkfontdir, which has been merged into mkfontscale.
Update dependencies and bump portrevisions.
Add an entry to UPDATING and MOVES

Changelog:
https://lists.x.org/archives/xorg/2019-March/059633.html

Thanks to Antoine for the exp-run!

PR:		236336 (exp-run)
Obtained from:	FreeBSD Graphics Team dev repo
		https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/mkfontscale
Sponsored by:	B3 Init

Fix fetch and handover maintainership to submitter.

PR:		217675
Submitted by:	portmaster@bsdforge.com
Approved by:	mat (mentor)
Differential Revision:	https://reviews.freebsd.org/D9973

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Make fonts repecting XDG

Xorg is now looking in ${LOCALBASE}/share/fonts by default
Xorg now accepts symlinks in etc/X11/fontpath.d (as decribed in Xserver(1))
Large cleanup on lots of font ports
All fonts are now properly dynamically generating fonts.dir and fonts.scale
instead of sometime overwriting existing ones)
All fonts are generating fontconfig's cache
Improve consistency in fonts ports

cleanup plist

x11-fonts/sgifonts: Use $TAR instead of $EXTRACT_CMD

Currently, FreeBSD defines EXTRACT_CMD as $TAR, but DragonFly does not
have a default value for EXTRACT_CMD.  Using $TAR instead of $EXTRACT_CMD
is a No-Op for FreeBSD, but restores the build on DragonFly which got
disrupted as a result of the previous commit.

Support STAGEDIR.

PR:		ports/193173
Submitted by:	Ports Fury.

Add NO_STAGE all over the place in preparation for the staging support (cat: x11-fonts)

- Use single space after WWW:

New USES imake to handle the dependency on imake.

This uses accept 'env' as an argument for ports that do use their own or a different do-configure target.

Modify xmkmf so it accept IMAKECPPFLAGS as default flags for imake and pass it to the called imake.
Modify xorg-cf-files (the FreeBSD.cf configuration file) to allow CppCmd to be overwritten.
Pass CppCmd CcCmd and CplusplusCmd via command line to each call of imake via IMAKECPPFLAGS
Pass IMAKE_DEFINE with the above arguments to MAKE_ARGS so that imake spawned from Makefile generated by a previous
imake also inherit the defined CppCmd CcCmd and CplusplusCmd.
Make imake use devel/tradcpp all the time, so that when buidling with clang we do not depend on gcc's cpp.
Make imake respect CC and CXX
Make imake respect USE_GCC (if set imake will use gcc's cpp).

While here:
- Remove a couple of indefinite articles from comments
- Trim headers
- Fix a couple of ports to build with clang or use: USE_GCC=any
- Fix a now useless redefinition of the extraction chain
- Fix a typo in japanese/Wnn7-lib bundled imake template definitions
- Fix some XMKMF execution with no env specified
- Use options helper in x11/xautolock to simplify the port

All supported version of FreeBSD have a bsdtar version that support extracting rpm. Remove now useless dependency on rpm2cpio

Feature safe:	yes

- Strip header at request of original creator

Submitted by:	trevor
With hat:	portmgr

- Get Rid MD5 support

Convert most of remaining ports that depend on xorg-libraries to modular xorg.

- supply corresponding USE_XORG for all imake-using ports that need it
- USE_IMAKE no longer implies USE_XLIB in absence of USE_XORG
- retire USE_X_PREFIX which is not really used anywhere after the
  above change
- a few minor nits like whitespace and SF macro

Tested by:	2 tinderbox runs by pav
Approved by:	portmgr (pav)

Reset conrads@cox.net due to lack of time to work on FreeBSD.

Hat:		portmgr

- Remove unneeded dependency from gtk12/gtk20 [1] - Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG - Remove X11BASE support in favor of LOCALBASE or PREFIX - Use USE_LDCONFIG instead of INSTALLS_SHLIB - Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
	Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
	ehaupt, nox, itetcu, flz, pav

PR:		116263
Tested on:	pointyhat
Approved by:	portmgr (pav)

- Welcome X.org 7.2 \o/. - Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}. - Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Pass maintainership to submitter

(Notes: request of ports@ http://lists.freebsd.org/pipermail/freebsd-ports/2006-October/036304.html )

Submitted by:	Conrad J. Sabatier <conrads at cox.net>

- Remove CVS tags and blank lines from distinfo file in unmaintained ports

Obtained from:	distinfo survey

Reset maintainership to ports@ after ~4 months without any response to any PR.

Thanks for contributing.

Since the acroread7 port is a somewhat important port for our users, I
will hand it over to emulation@ if no _active_ *committer* takes it
before the ports freeze.

While I'm here:
 - fix a little nit in the csound port (I think the intention was to
   create no backup file instead of creating one with a "-e" extension)
 - set ARCH to i386 in the amd64 case for the acroread7 port. This
   is a work-around to be able to install everything when a dependency
   is not already installed (ARCH is read-only in sub-makes, so the
   dependencies can't change it). This should be removed when the
   dependencies are fixed or converted to use bsd.linux-rpm.mk. [1]

Not objected to by:	portmgr (explicit: krion; silence: rest)
Maintainer timeout:	~4 months
Submitted by:		Sangwoo Shim <sangwoos@gmail.com> [1]
PR:			87985 [1]

Hash with SHA-256.

- Add the X_WINDOW_SYSTEM={xorg,xfree86-4,xfree86-3} variable to bsd.port.mk,   and make XFREE86_VERSION map to it.  XFREE86_VERSION is now deprecated. - Make xorg the default X_WINDOW_SYSTEM on -current. - Add several new X_*_PORT variables which point to various pieces of X11 based   on the setting of X_WINDOW_SYSTEM, and make ports use them. - Add information to CHANGES about how to handle the 

PR:		ports/68763
Approved by:	portmgr (marcus)
Approved by:	re (scottl)

Use SORT macro.  Clarify COMMENT.  Use PLIST_DIRS.  Drop maintainership.

Add size data.

Use the CPIO macro defined in bsd.port.mk.

s/rpm2cpio/rpm2cpio.pl/ after the recent update of archivers/rpm2cpio (the script was renamed to solve a conflict with archivers/rpm) to fix possible build problems.

I've tested this with lang/icc. Any new errors because of this commit in
one of the modified ports may be because the ports previously may have used
rpm2cpio from archivers/rpm instead of the used {EXTRACT,BUILD}_DEPENDS
archivers/rpm2cpio.

Make fetchable.

nods to:  fenner's survey and www.alltheweb.com

Fix dependence on rpm2cpio.

Submitted by:	Phil Pennock

Chase home page.

Submitted by:	Michal Pasternak

Retire comment file.

Add a dependency seen in the bento log.

Inadvertently, I did not remove these lines when I got rid of the use of the temporary file, and so "make do-extract" was broken.

reported by:	dougb

Use a pipe instead of a temporary file.

Prefer the rpm2cpio from ports/archivers/rpm2cpio to the (conflicting) one from ports/archivers/rpm, because the former is much smaller and depends only on Perl.

Quiet this port.

Submitted by:	dougb

Install under local/.  Clarify PKGMESSAGE.

new port of the fonts from the SGI ProPack 1.4 for Linux, from a suggestion by Ryan Dooley