x11-servers/Xfstt1.11_1

x11-servers/Xfstt: Reset maintainer

PR:		294565
Approved by:	gspurki@gmail.com (maintainer)

x11-servers/Xfstt: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

x11-servers: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Ade Lovett <ade@FreeBSD.org>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  grog
  *  jabley@clear.co.nz
  *  lesi@FreeBSD.org

With hat:	portmgr

x11-servers/Xfstt: Add CPE information

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

x11-servers/Xfstt: Update to 1.11

ChangeLog: https://github.com/guillemj/xfstt/blob/master/NEWS

PR:	248690
Submitted by:	gspurki@gmail.com (maintainer)

x11-servers/Xfstt: fix build on GCC architectures

Use C++11 compiler:
encoding.cc:34: error: 'nullptr' was not declared in this scope

- Update to 1.10 - Pass maintainership to submitter

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Convert to UCL & cleanup pkg-message (categories x)

Upgrade x11-servers/Xfstt from 1.9.2 to 1.9.3

Release note:
 Documentation:
 * Switch to https for hadrons.org URLs.
 Code cleanup
 * Check strSubFamily for emptiness when assigning it.
 * Use matching delete [] operator for new [].
 * Use std::string instead of static buffers.
 * Check error failures from socket() call.
 * Do no dereference TTFont variable before using it.
 * Use memcpy() instead of strncpy() to copy a fixed-length string.
 * Initialize structs that go over the wire to 0.
 * Remove pathname length check.

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

Switch to xorgproto instead of individual packages

Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto.  This update
tracks that change.

* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
  bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
  instead depend on xorgproto.  Bump portrevision.
* Delete the old *proto packages, update MOVED.

PR:		230023
Submitted by:	zeising
Approved by:	portmgr (antoine)
exp-run by:	antoine

- Fix LICENSE - Add LICENSE_FILE - Switch to options helpers

Reset ports per maintainer request.

PR:		215557
Submitted by:	A.J. "Fonz" van Werven (maintainer)

Fix build on 9.

PR:		203766
Submitted by:	maintainer
Sponsored by:	Absolight

x11-servers/Xfstt: update to 1.9.2

- update to 1.9.2
- pass maintainership to submitter
- add new maintainer's distfile mirror to MASTER_SITES
- specify a LICENSE
- sort USES alphabetically
- regenerate patches with make makepatch
- remove absolute path from pkg-message
- add PROVIDE, REQUIRE and KEYWORD to the rc script

PR:		202267
Submitted by:	A.J. "Fonz" van Werven <freebsd@skysmurf.nl>

Make fonts repecting XDG

Xorg is now looking in ${LOCALBASE}/share/fonts by default
Xorg now accepts symlinks in etc/X11/fontpath.d (as decribed in Xserver(1))
Large cleanup on lots of font ports
All fonts are now properly dynamically generating fonts.dir and fonts.scale
instead of sometime overwriting existing ones)
All fonts are generating fontconfig's cache
Improve consistency in fonts ports

- Remove useless MASTER_SITE_SUBDIR - Drop @dirrm* from plist - Add empty directory to plist

Cleanup plist

x11-servers/Xfstt: 1.6 -> 1.9.1

new master site and:

1.9.1 (2014-09-27)

        Bump gettext dependency to 0.18.2.
        Bump automake version to 1.11.
        Switch from gzip to xz for distribution tarballs.
        Update upstream project URLs to the new site.

1.9 (2012-05-02)

        Fix file descriptor leaks.
        Fix directory resource leaks and segfaults on opening errors.
        Reset the umask before creating the temporary directory.
        Rewrite showttf to use XCB instead of X11.

1.8 (2010-11-09)

        Remove the obsolete --multi option.
        Bump gettext dependency to 0.18.
          Use --previous in msgmerge to help translators.
        Blank unused fields of the fsError struct when sending an error.
        Fix segfaults on font open errors (thanks to Edward Welbourne).
        Handle mmap failures which might end up as segfaults otherwise.
        Fix crashes with fortify support when:
	  Listing fonts (thanks to Erik Devriendt).
	  Setting info file magic and type fields (thanks to Niall Creech).
	Fix segfault on fonts with unknown cmap format.
	Add SIGHUP handler to re-sync fonts cache.
	Do not hardcode any path component in the man page.
	Code cleanup:
	  Fixed several compiler warnings.
	  Constify types.
	  Refactor client state into a new struct.
	  Refactor font protocol error reply handling.
	  Remove unused or duped includes.
	  Switch more C 'char *' strings to C++ strings.
	  Use C++ algorithm instead of custom code.
	  Always include "config.h" first.
	  Use <stdint.h> instead of our own types.
	Build system cleanup:
	  Detect system endianness at build time.
	  Enable silent rules by default if support is available.
	  Do not use AM_MAINTAINER_MODE.
	  Make X11 usage selectable at configure time (new '--with-x11').
	  Always build (but not install) extra tools.
	  Use pkg-config to get fontsproto and x11 module flags.
	  Fix 'make distcheck'.

1.7 (2005-11-30)

	Made gettext external.
	Use autoreconf instead of 'autogen.sh'.
	Changed mail address.
	Generate the manpage at build time, to use variable paths and version.
	Remove win32 obsolete code.
	Use new error, warning and info functions.
	Changed some data types names.
	Fix hyphen used as minus sign in manpage.
	Fix build failure on Irix with gcc 3.2 (thanks to Dirk Tilger).
	Add IPv6 support.
	Update FSF's address.

PR:		194968
Submitted by:	C.Hutchinson <portmaster@bsdforge.com>

Cleanup plist

Rename all patches that contain '::' as a path separator, and use '__' instead.

Support stage

Fix properties on pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat: x11-servers)

- Get Rid MD5 support

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script. Specifically, newer autoconf (> 2.13) has different semantic of the configure target. In short, one should use --build=CONFIGURE_TARGET instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:		126524 (obsoletes 52917)
Submitted by:	rafan
Tested on:	two pointyhat 7-amd64 exp runs (by pav)
Approved by:	portmgr (pav)

- fix typo -> plist for -DNOPORTDOCS - SUB_FILES= pkg-plist and s/X11/Xorg/ - use MASTER_SITE_BERLIOS - bump PORTREVISION

Prompted by: 	QA Tindy run

- Remove unneeded dependency from gtk12/gtk20 [1] - Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG - Remove X11BASE support in favor of LOCALBASE or PREFIX - Use USE_LDCONFIG instead of INSTALLS_SHLIB - Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
	Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
	ehaupt, nox, itetcu, flz, pav

PR:		116263
Tested on:	pointyhat
Approved by:	portmgr (pav)

- Welcome X.org 7.2 \o/. - Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}. - Bump PORTREVISION for ports intalling files in ${X11BASE}.

Remove USE_REINPLACE from categories starting with X

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- Add SHA256

At Kris's request, back out the MACHINE_ARCH spelling correction until after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

SIZEify.

- Update to version 1.6

PR:		56439
Submitted by:	Ports Fury

Update to version 1.4.

PR:		48048
Submitted by:	Ports Fury

I broke the port by committing bogus stuff I was working on :-/

Noticed by:	Sergey Mokryshev <mokr@mokr.net>

Give back maintanership to ports@, due to lack of time and clues.

Convert more spaces into tabs in ports/x11-servers.

Remove blank line from files/patch-ad to make portlint happy.

Use proper capitalization (freebsd.org -> FreeBSD.org)

Noted by: sobomax

Change maintainer email address (olgeni@uli.it -> olgeni@freebsd.org)

Update to sync with bsd.port.mk rev 1.361 - use PORTDOCS that is now in bsd.port.mk, for easy removal of documentation.  I left alone one port - japanese/elisa8x8 (or something like that), because it appeared to have some rather weird way of doing PORTDOCS substitution.

A whole bunch of updates from the new maintainer:   * install startup file   * create TrueType directory   * add new --notcp option (from ports/21957) and document it

See PR for complete details

PR:		22946
Submitted by:	maintainer

Reassign maintainership from ports@FreeBSD.org to Jimmy Olgeni <olgeni@uli.it>.

Submitted by:	Jimmy Olgeni <olgeni@uli.it>