x11-toolkits/p5-Tk-CursorControl 0.4_2

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Dima Sivachenko <dima@Chg.RU>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Igor Pokrovsky <ip@doom.homeunix.org>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Juli Mallett
  *  Kenjiro Cho <kjc@csl.sony.co.jp>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.de>
  *  Lubomir Marinov <lubomir_m@abv.bg>
  *  Marc Recht <marc@informatik.uni-bremen.de>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Grünewald <michipili@gmail.com>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Mike Krutov <neko@takino.org>
  *  Mike Meyer <mwm@mired.org>
  *  Olivier Duchateau
  *  Paul Schmehl <pauls@utdallas.edu>
  *  Peter Hawkins <thepish@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Radim Kolar
  *  Rene Ladan <rene@FreeBSD.org>
  *  Robert C. Noland III <rnoland@FreeBSD.org>
  *  Simon Barner <barner@gmx.de>
  *  Stephane Legrand <stephane@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tom McLaughlin <tmclaugh@sdf.lonestar.org>
  *  Vanilla I. Shu <vanilla@MinJe.com.TW>
  *  Will Andrews <andrews@technologist.com>
  *  Yukihiro Nakai <nakai@FreeBSD.org>
  *  Zane C, Bowers <vvelox@vvelox.net>
  *  asami
  *  chinsan
  *  chuckr
  *  clsung@dragon2.net
  *  dmitry@karasik.eu.org
  *  fjoe@FreeBSD.org
  *  gahr
  *  gena
  *  ijliao
  *  mi
  *  minter@lunenburg.org
  *  nivit@users.sourceforge.net
  *  ports@c0decafe.net
  *  roland.jesse@gmx.net
  *  thierry@pompo.net
  *  vanilla

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Remove no-op typo

Notified by:	0mp

Convert REINPLACE_CMD to patch file

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except for where it resulted in a change in output from build-depends-list or run-depends-list.

Approved by:	portmgr (adamw)

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Add NO_ARCH

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

- Add LICENSE - Cleanup PLIST

- Support STAGEDIR

Add NO_STAGE all over the place in preparation for the staging support (cat: x11-toolkits)

- Cleanup Makefile header

- Use RUN_DEPENDS:=BUILD_DEPENDS - Add BUILD_DEPENDS - Cosmetic change

- Convert to new perl framework

- update png to 1.5.10

- Add p5-Tk-CursorControl 0.4

Tk::CursorControl is-NOT-a Tk::Widget. Rather, it uses Tk and encompasses a
collection of methods used to manipulate the cursor (aka pointer)
programmatically from a Tk program.

WWW: http://search.cpan.org/dist/Tk-CursorControl/