x11-toolkits/qt5-datavis3d5.15.19p0

Qt5: Update to 5.15.19

This is the final release of Qt5. If your port still uses Qt5 and could
possibly use Qt6 instead, now would be a good time to make the switch.

PySide2: Update to 5.15.19

Announcement:
https://lists.qt-project.org/pipermail/announce/2026-May/000626.html
Release notes:
https://code.qt.io/cgit/qt/qtreleasenotes.git/tree/qt/5.15.19/release-note.md

Qt5: Update to 5.15.18

This is the penultimate release of Qt5. While Qt5 is EOL, due to the
LGPL releases being a year behind the commercial releases, there will
still be one more patch release in May 2026.

PySide2: Update to 5.15.18

Announcement:
https://lists.qt-project.org/pipermail/announce/2025-October/000592.html
Release notes:
https://code.qt.io/cgit/qt/qtreleasenotes.git/tree/qt/5.15.18/release-note.md

MFH:		2025Q4

Qt5: Update to 5.15.17 (getting down to the end)

Upstream standard support for Qt5 is officially over. [1] In short,
that means get your ports off of Qt5 ASAP, especially end-user
applications. FreeBSD deprecation of Qt5 is coming soon! It will likely
be a year of lead time, but please help in the meantime and remove qt5
flavors and child ports whenever possible.

www/qt5-webengine has been updated to 5.15.19 with security patches up to
Chromium 135.0.7049.95. It's unclear at this point if further security
patches will be publically available. The Qt5 WebEngine component,
however, is and forever will be based on Chromium 87.0.4280.144, which
is over 4 years old. Props to upstream for their backports over all
these years and making them publically available (probably more to do
with licensing constraints than anything, but hey).

We otherwise depend on KDE as our direct upstream to roll our distfiles,
which we have been hosting locally for over 3 years. Since Qt upstream
drops the LGPL releases of Qt 5.15.x a year later, there's no guarantee
KDE will rebase their patchset over the next year for the remaining two
.18 and .19 releases. This might be the last update for Qt5 on FreeBSD.

[1] https://www.qt.io/blog/qt-5.15-extended-support-for-subscription-license-holders

Qt 5 distribution ports: Add USE_LDCONFIG where appropriate

Pull Request:	https://github.com/freebsd/freebsd-ports/pull/358

Qt5: Update to 5.15.16

Update devel/pyside2* and devel/shiboken2 to 5.15.16

Update www/qt5-webengine to include the latest security fixes in
the chromium submodule [1]

Release note:
https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.16/release-note.md

MFH:		2024Q4
Security:	16e472d5-a8aa-11ef-b680-4ccc6adda413 [1]

Qt5: Update to 5.15.15

Update devel/pyside2* and devel/shiboken2 to 5.15.15

Update www/qt5-webengine to include the latest security fixes in
the chromium submodule

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.15/release-note.md

MFH:		2024Q3
Security:	66907dab-6bb2-11ef-b813-4ccc6adda413

Qt5: Update to 5.15.14

Update devel/pyside2* and devel/shiboken to 5.15.14

Update devel/qt5-script* and www/qt5-webengine to 5.15.17

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.14/release-note.md

Qt5: Update to 5.15.13

Update devel/pyside2* and devel/shiboken to 5.15.13

Update www/qt5-webengine to latest commit. Python 3.x support has been
integrated upstream, so local patches have been removed.

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.13/release-note.md

Qt5: Update to 5.15.12

Update devel/pyside2* and devel/shiboken2 to 5.15.12

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.12/release-note.md

Qt5: Update to 5.15.11

Update devel/pyside2* and devel/shiboken2 to 5.15.11

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.11/release-note.md

Qt5: Update to 5.15.10

Update devel/qt5-script* and www/qt5-webengine to 5.15.15-lts
Update devel/pyside2* and devel/shiboken2 to 5.15.10

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.10/release-note.md

PR:		273934
Exp-run by:	antoine

x11-toolkits/qt5-datavis3d: unbreak after 020693c166d1

Project MESSAGE: perl -w /usr/local/lib/qt5/bin/syncqt.pl -module QtDataVisualization -version 5.15.8 -outdir /wrkdirs/usr/ports/x11-toolkits/qt5-datavis3d/work/kde-qtdatavis3d-5.15.8p0 -builddir /wrkdirs/usr/ports/x11-toolkits/qt5-datavis3d/work/kde-qtdatavis3d-5.15.8p0 /wrkdirs/usr/ports/x11-toolkits/qt5-datavis3d/work/kde-qtdatavis3d-5.15.8p0
sh: perl: not found

PR:		266007
Reported by:	antoine (via exp-run)

Qt: Update Qt 5 to 5.15.8

- update distfiles to be rebased on the Qt 5.15.8 branch

PR:		268773
Exp-run by:	antoine

Qt5: Update Qt 5 to 5.15.7

* rebase the KDE patched Qt5 ontop of the 5.15.7 branch
* update qt5-script to 5.15.11

Exp-run by:	antoine
PR:		268533

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

qt5: Update Qt to 5.15.5 (KDE patched)

- update patch-collection diff to be at the highest patch-level
- update patch-collection diff to be against 5.15.5 instead of 5.15.2
- update devel/qt5-script to 5.15.10
- libressl support by Felix Palmen <felix@palmen-it.de>

PR:			264944
Exp-run by:		antoine
Differential Revision:	https://reviews.freebsd.org/D35619

Qt: Switch Qt5 to use KDE's Qt patch collection

From [1]
    What's this?

	This is a set of git repositories based on the last public
	commits available for Qt 5.15 branches with a curated collection
	of patches on top to ensure open source products can be used
	comfortably until users transition to their Qt 6-based ports.

    Which patches does it include?

	This collection of patches includes patches that fix at least
	one of the following:

	    * Security issues
	    * Crashes
	    * Functional defects

	We only include patches that have been approved upstream in the
	Qt project. If a patch cannot be merged upstream for technical
	reasons (e.g. the class no longer exists), it can also be
	merged.

	The patches to merge will be decided based on their relevance
	towards Open Source products and their viability.

PR:		260548
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D33446

[1] https://community.kde.org/Qt5PatchCollection

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Only define USE_LDCONFIG in devel/qt5-core

All the qt5-ports share the same library directory. devel/qt5-core is dependet on
by all others.
So there is no need to add identical entries to libdata/ldconfig, and restart the
ldconfig service on every pkg change of those ports.

Reported by:	bapt
Reviewed by:	bapt
Differential Revision:	https://reviews.freebsd.org/D27224

Update Qt5 to 5.13.2

Announcement:
        https://www.qt.io/blog/qt-5.13.2-released

Thanks to kai@ for updating webengine.

PR:		241649
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Update Qt5 to 5.12.1

Release announcement:
  https://blog.qt.io/blog/2019/02/01/qt-5-12-1-released/
Changelog:
  https://wiki.qt.io/Qt_5.12.1_Change_Files

- A change was required to qt-dist.mk to always pass LOCALBASE to qmake,
  as Qt5 has been installed to a prefix for some time now, there should
  not be any harm in that, with respect to it picking up installed versions
  of itself during build.

PR:		235622
Exp-run by:	antoine

Fix Qt5 symbol version scripts to put the catch-all clause first.  When a symbol matches multiple clauses the last one takes precedence.  If the catch-all is last it captures everything.  In the case of Qt5 libraries this caused all symbols to have a Qt_5 label while some should have Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1] https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2] https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3] https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

Update Qt5 to 5.12.0

http://blog.qt.io/blog/2018/12/06/qt-5-12-lts-released/

- This breaks support for libressl again. Patches are welcome.

PR:		233705
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Merge lang/qt5-qml and x11-toolkits/qt5-quick into x11-toolkits/qt5-declarative

- There was no obvious reason to split these ports, and it makes
  porting simpler; the set of ports using either mostly coincided.

Exp-run by:	antoine
PR:		223687
PR:		232751

x11-toolkits/qt5-datavis3d: fix build with GCC-based architectures

PR:		232424
Submitted by:	x11-toolkits/qt5-datavis3d: fix build with GCC-based architectures

Update Qt5 to 5.11.1

Big thanks to
        * brnrd for the libressl patches in net/qt5-network
        * jhale for fixing the bulk load of ports

PR:		230884
Exp-run by:	antoine

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	→https://reviews.freebsd.org/D15540

Update the Qt5 ports to 5.10.1.

The work was done by tcberner and myself, with thanks to antoine for the
exp-run.

Not a lot to report compared to other Qt5 updates:
* net/qt5-network is still broken with LibreSSL. I said this in a commit
  message ages ago but it bears repeating: upstream is open to adding support
  for LibreSSL, but someone needs to step up to maintain it upstream, otherwise
  things will continue to be broken all the time.
* www/qt5-webengine is a huge monster that is terrible to update, just like
  www/chromium itself is. We (kde@) have decided to keep using the 5.9 series
  for the time being, as it should be compatible with the rest of Qt anyway. It
  was updated to 5.9.5, the latest 5.9 release at the time of writing.

PR:		228213

Fix permissions in installed Qt5 header files

For the qt5-* ports bsd.qt.mk sets EXTRACT_AFTER_ARGS, and
thereby does not get the normal default value of
      --no-same-owner --no-same-permissions
passed when extracting. This lead to for example header files
being installed (i.e. copied), with permissions group write
permissions.

Manually append that to the bsd.qt.mk shenanigans (also do the
same in www/qt5-webchannel, which opts out of the bsd.qt.mk value)

PR:		227027
Reported by:	grarpamp@gmail.com

Update Qt5 to 5.7.1, and unify the Qt4 and Qt5 ports some more

* Update Qt5 to 5.7.1
* Move Qt4 binaries to lib/qt4/bin
* Move Qt5 libraries to lib/qt5/lib
  By moving the libraries we should finally be able to get rid of the inplace
  upgrade bug (see ports bugs 194088, 195105 and 198720):  when Qt5's libraries
  were lying in /usr/local/lib, which would often get added by pkgconfig to the
  linker paths via dependencies, the already installed libraries were linked
  against, instead of the ones that were being built. This forced us to make
  sure, that -L${WRKSRC}/lib was always coming before -L/usr/local/lib in the
  linker flags. With this change this should no longer be the case.
* Rename some ports to match the rest (foo-qtX -> qtX-foo)
* Depend on new port misc/qtchooser [see UPDATING & CHANGES]

There are several new Qt5 ports which all have been created by Marie Loise Nolden
<nolden@kde.org>. Thanks again.

PR:		216797
Exp-Run by:	antoine
Reviewed by:	rakuco, mat, groot_kde.org
Approved by:	rakuco (mentor)
Differential Revision:	https://reviews.freebsd.org/D9213