x11-wm/nscde2.3_3

graphics/ImageMagick: update to 7.1.2-25

Changes:	https://github.com/ImageMagick/ImageMagick/compare/7.1.2-24...7.1.2-25
Security:	CVE-2026-53460
Security:	CVE-2026-53461
Security:	CVE-2026-53462
Security:	CVE-2026-53463
Security:	CVE-2026-53464
Security:	CVE-2026-53465
PR:		296190

devel/py-pyxdg: bump RUN_DEPENDS consumers after rename

devel/py-xdg: rename to devel/py-pyxdg to match Python package name

While here:
- switch to USE_PYTHON=pep517
- pull in upstream commits addressing Python 3.12, 3.14, 3.15 compat

*/*: Introduction USES=sudo

A new uses 'sudo' has been added to transperently depends of the
proper flavor of sudo 'default' or 'sssd' depending on the default
version set by the user.

If you prefere to use 'sssd' flavor of sudo, add the following
to your make.conf:

        DEFAULT_VERSIONS+=sudo=sssd

All sudo consummer ports has benn updated to USES=sudo

Reviewed by:    0mp
Approved by:    mat
Sponsored by:   Klara, Inc.
Differential Revision:	https://reviews.freebsd.org/D52160

devel/py-pyyaml: Move devel/py-yaml to devel/py-pyyaml

- Bump PORTREVISION of dependent ports for dependency change

x11-wm/nscde: Update version 2.2=>2.3

PR:		272533
Approved by:	freebsd@ny-central.org (submitter is maintainer)

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

Mk/Uses/magick.mk: Bump all consumers

Bump all consumers of ImageMagick ports after flavorizing them.

Approved by:	tcberner (mentor, implicit)

audio/opus: bump consumers after update to 1.4

x11-wm/nscde: Replace shells/ksh93 with shells/ksh dependency

shells/ksh is the continuation of the ksh2020 development.
shells/ksh93 is the no longer developed legacy AT&T AST ksh.

PR:		267501
Reported by:	cy

PyQt: Update to latest versions

- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7

PR:		269751
Exp-run by:	antoine

x11-wm/nscde: Replace expired ksh2020 dependency, Remove DEPRECATED

- add LICENSE_FILE
 - fix avoiding use of != in assignments

PR:		267501
MFH:		2022Q4

x11-wm/nscde: deprecate because of shells/ksh2020

x11-wm/nscde: fix packaging when uname -m != uname -p

pkg-static: Unable to access file /wrkdirs/usr/ports/x11-wm/nscde/work/stage/usr/local/lib/NsCDE/FreeBSD_powerpc64/XOverrideFontCursor.so:No such file or directory
pkg-static: Unable to access file /wrkdirs/usr/ports/x11-wm/nscde/work/stage/usr/local/libexec/NsCDE/FreeBSD_powerpc64/colorpicker:No such file or directory
pkg-static: Unable to access file /wrkdirs/usr/ports/x11-wm/nscde/work/stage/usr/local/libexec/NsCDE/FreeBSD_powerpc64/fpclock:No such file or directory

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

x11-wm/nscde: Update to 2.2

ChangeLog:	https://github.com/NsCDE/NsCDE/releases
PR:		265830

x11-wm/nscde: add xsession integration

Add missing files for xsessions integration.

PR:	260720
Reported by:	grahamperrin@gmail.com

x11-wm/nscde: fix typo in pkg-message

framework: Add new USES 'magick' for graphics/ImageMagick*

A new USES has been added to depend on ImageMagick.

	USES=magick

adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.

If a specific version is required, use for example

	USES=magick:6        resp.     USES=magick:7

If only a build, run or test is required, use for example

	USES=magick:build    resp.     USES=magick:6,build,test

If a dependency on the nox11 flavor is required, use for example

	USES=magick:nox11    resp.     USES=magick:7,nox11,run,test

See magick.mk for more details on the available flags.

The tree has been completely converted to make use of this.

Approved by:	bapt
Differential Revision: https://reviews.freebsd.org/D32754

x11-wm/nscde: update to 1.4

Port changes:
* imagemagick dependency removed from options, relying on DEFAULT versions in /etc/make.conf instead
* added option for choosing ksh version; default switched to ksh2020 because it compiles and works on arm64
* add WWW to pkg-descr
* convert pkg-message to UCL format

Upstream changes: https://github.com/NsCDE/NsCDE/releases/tag/1.4

PR:		260219
Reported by:	Chris Moerz <freebsd@ny-central.org> (maintainer)

x11-wm/nscde: Update to 1.3

PR:	259328

x11-wm/nscde: New port: modern and functional CDE

* Submitter becomes maintainer

sCDE is a retro but powerful UNIX desktop environment which resembles
CDE look (and partially feel) but with a more powerful and flexible
framework beneath-the-surface, more suited for 21st century unix-like
and Linux systems and user requirements than original CDE.

See also https://github.com/NsCDE/NsCDE

PR:		255929
Differential Revision:	https://reviews.freebsd.org/D30591