archivers/lzo22.10_2

archivers/lzo2: Fix CPE information

archivers/lzo2: add #include <stddef.h> to lzodefs.h

to make the header self-contained.

PR:		294715
Pull Request:	https://github.com/freebsd/freebsd-ports/pull/504

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

archivers: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Albert Vernon <f3cun3c02@sneakemail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Kuehn <freebsd@nagilum.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Zhuravlev <zaa@zaa.pp.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andreev Maxim
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Chernov <ache@FreeBSD.org>
  *  Andrey Kostenko <andrey@kostenko.name>
  *  Anes Mukhametov <anes@anes.su>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Ayumi M <ayu@commun.jp>
  *  Carsten Larsen <cs@innolan.dk>
  *  Chin-San Huang <chinsan.tw@gmail.com>
  *  Chris D. Faulhaber <jedgar@FreeBSD.org>
  *  Chris Larsen <darth@vader.dk>
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Cyrille Lefevre <cyrille.lefevre@laposte.net>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Felix Palmen <felix@palmen-it.de>
  *  Gabor Kovesdan <gabor@FreeBSD.org>
  *  Gea-Suan Lin (gslin@ccca.nctu.edu.tw)
  *  Gea-Suan Lin <gslin@gslin.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Hsin-Han You <hhyou@cs.nctu.edu.tw>
  *  Hye-Shik Chang
  *  Hye-Shik Chang <perky@FreeBSD.org>
  *  Igor Pokrovsky <tiamat@telegraph.spb.ru>
  *  Jaap Boender <jaapb@kerguelen.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Jeff Burchell <toxic@doobie.com>
  *  Jeffrey H. Johnson <CPE1704TKS@bellsouth.net>
  *  Jerry Hicks
  *  Joao Carlos Mendes Luis <jonny@jonny.eng.br>
  *  John Marino <marino@FreeBSD.org>
  *  José García Juanino <jjuanino@gmail.com>
  *  Juergen Lock <nox@jelal.kn-bremen.de>
  *  Kevin Golding <ports@caomhin.org>
  *  Konstantin Reznichenko <kot@premierbank.dp.ua>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Lars Thegler <lth@FreeBSD.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark Kane <mark@mkproductions.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Matteo Cypriani <mcy@lm7.fr>
  *  Max Khon <fjoe@FreeBSD.org>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Melvyn Sopacua <melvyn@magemana.nl>
  *  Miguel Mendez <flynn@energyhq.homeip.net>
  *  Nathan Ahlstrom <nra@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Patrick Seal <patseal@hyperhost.net>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Per Wigren
  *  Philippe Casidy <pcasidy@casidy.com>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Poul-Henning Kamp <phk@FreeBSD.org>
  *  Radim Kolar
  *  Radim Kolar <hsn@filez.com>
  *  Radim Kolar <hsn@netmag.cz>
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Richard Gallamore <ultima@FreeBSD.org>
  *  Roman Shterenzon <roman@xpert.com>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Sam Lawrance <boris@brooknet.com.au>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Sir l33tname <sirl33tname@gmail.com>
  *  Stanislav Sedov <ssedov@mbsd.msk.ru>
  *  Stefan Esser <se@FreeBSD.org>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  Sylvio Cesar <sylvio@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Abthorpe <thomas@goodking.ca>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Vanilla I. Shu <vanilla@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Will Andrews <andrews@technologist.com>
  *  Yarodin <yarodin@gmail.com>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  ache
  *  adamw
  *  antoine@FreeBSD.org
  *  bf <bf2006a@yahoo.com>
  *  chinsan <chinsan.tw@gmail.com>
  *  giffunip@asme.org
  *  gurkan@phys.ethz.ch
  *  iblis <iblis.dif01@nctu.edu.tw>
  *  ijliao
  *  jmz
  *  kwm@FreeBSD.org
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  mm
  *  ports@c0decafe.net <ports@c0decafe.net>
  *  samm@freebsd.org
  *  swhetzel@gmail.com
  *  will

With hat:	portmgr

archivers/lzo2: Add CPE information

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

Simplify lzo2.pc packaging fix.

PR:		218058
Submitted by:	Ralf van der Enden

Install .pc into libdata, fix build without docs.

PR:		218058
Reported by:	sunpoet@, danfe@, gaspar, kib@

Update to upstream release 2.10.

Cleanup patches, a* categories.

Rename them to follow the make makepatch naming, and regenerate them.

With hat:	portmgr
Sponsored by:	Absolight

Remove Authors from pkg-descr

Upgrade to new release 2.09

Contains workaround for GCC instruction generating bug on some architectures
such as ARM 4, 5, SPARC.

- Drop .la files, no dependees require them - Drop @dirrm* from plist

Approved by:	portmgr blanket

Reduce unnecessary bsd.port.options.mk inclusions by using OPTIONS helpers.

For liborange, reverse the logic, as I'm pretty sure the OPTIONS were being
used to disable the selected options.

Approved by:	portmgr (blanket)

Update to new upstream version 2.08.

Relevant upstream changes are, taken from the NEWS file:
  * Updated the Autoconf scripts to fix some reported build problems.
  * Fixed lzo_init() on big-endian architectures like Sparc.

Revert to libtool:keepla to be on the safe side.

Add #include <limits.h> to include/lzo/lzodefs.h to fix build issues on some architectures, for instance, i386, that would otherwise leave ULONG_MAX undefined.

Bug is reported upstream.

Reported by: Randy Bush

Update to new upstream release 2.07, fixing a potential buffer overrun.

MFH:	2014Q2
Security:	d1f5e12a-fd5a-11e3-a108-080027ef73ec

When linking a library libA with a library libB using libtool, if libB.la exists, libtool will add all libraries libB.la refers to (dependency_libs field) to the linker command line and store them in the dependency_libs field of libA.la.  So everything that subsequently links with libA will also link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

Remove trailing whitespaces from category archivers

According to the Porter's Handbook (5.12.2.3.) default options must be added to OPTIONS_DEFINE. This policy has been implemented only recently that's why we have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

Convert to USES=libtool

Support staging.

Strip library unless WITH_DEBUG is set (if it is, STRIP_CMD is a no-op),
and bump PORTREVISION.

Add NO_STAGE all over the place in preparation for the staging support (cat: archivers)

Adjust NOPORTDOCS to OptionsNG. Trim header.

PR:		ports/181644
Submitted by:	Takefu <takefu@airport.fm>

Update to new upstram release; Changes in 2.06 (12 Aug 2011)   * Some minor optimizations for big-endian architectures.   * Fixed overly strict malloc() misalignment check in examples.

- Fix NOPORTDOCS support. [1] (using a different approach than suggested   by Philip).

- Support WITHOUT_CHECKS to skip the self-tests.

- Remove two excess blank lines from Makefile, making portlint happier.

The part marked with [1] was

Reported by: pgollucci
PR:          ports/159609

Change MASTER_SITES mirror to read LOCAL/mandree instead.

Suggested by: sunpoet@

ftp.uni-koeln.de no longer carriers util/arc/, mirror locally.

Update to lzo 2.05. Add LICENSE. Pass --docdir through CONFIGURE_ARGS to install into the right places. Disable the libc malloc() alignment test according to consultation of the upstream author, Marcus F. X. J. Oberhumer. He advised that the test were too strict and would be changed for 2.06. Refresh patches.

PR: ports/156931

env -> ${SETENV} (found with portlint).

Sync to new bsd.autotools.mk

Drop defunct MASTER_SITE.

Update to 2.04.

Submitted by: Martin Matuska <mm@freebsd.org>
PR:           ports/152183

Switch MAINTAINER line to FreeBSD address.

Approved by: garga (mentor, implicit)

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr

- Set MALLOC_OPTIONS=jz for self-test to avoid excessive (multiple hours!)   duration of self-tests. Found by Christian Weisgerber (naddy@).

PR:		130154
Submitted by:	Matthias Andree <matthias.andree@gmx.de> (maintainer)

- Fix build for users not using /bin/sh as root's shell

PR:		126935
Submitted by:	Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
Approved by:	maintainer

The great "Unbreak archivers/lzo2" project - step 1

This patch doesn't unbreak it yet, but it increases the output of
the test in which the port building hangs. I tried to build this
port on the standard places (tb4.droso.net, my ports building jails)
but couldn't reproduce it.

So I'm waiting for this one to go through a run on i386 machines
(http://portsmon.freebsd.org/portoverview.py?category=archivers&portname=lzo2
shows it once happens on i386) to fail and to get a pav or erwin
email about it, which will at least show us where it goes wrong.

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script. Specifically, newer autoconf (> 2.13) has different semantic of the configure target. In short, one should use --build=CONFIGURE_TARGET instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:		126524 (obsoletes 52917)
Submitted by:	rafan
Tested on:	two pointyhat 7-amd64 exp runs (by pav)
Approved by:	portmgr (pav)

Mark BROKEN on i386: runaway process during build.

- Reduce self-test verbosity. - Add DOCS and EXAMPLES files. - Bump PORTREVISION.

PR:		ports/124184
Submitted by:	Matthias Andree <matthias.andree@gmx.de> (maintainer)
Approved by:	gabor (mentor, implicit)

- Update to 2.03

PR:		124033
Submitted by:	Matthias Andree <matthias.andree@gmx.de> (maintainer)

- Remove unneeded dependency from gtk12/gtk20 [1] - Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG - Remove X11BASE support in favor of LOCALBASE or PREFIX - Use USE_LDCONFIG instead of INSTALLS_SHLIB - Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
	Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
	ehaupt, nox, itetcu, flz, pav

PR:		116263
Tested on:	pointyhat
Approved by:	portmgr (pav)

Use libtool port instead of included version to avoid objformat a.out botch

Conversion to a single libtool environment.

Approved by:	portmgr (kris)

SHA256ify

Approved by:	krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present in bsd.autotools.mk essentially makes this a no-op given that all the old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Add two more MASTER_SITES

Notified by:	kris