A flaw in libcurl makes it wrongly reuse an HTTP connection setup for a given
hostname using Negotiate authentication, when the initial request is done
using empty credentials. This can make user B's request get sent over user A's
previously authenticated connection.
Successfully using libcurl to do a transfer to a specific HTTP origin
(`hostA`) with **Digest** authentication and then changing the origin to a
different one (`hostB`) for a second transfer, reusing the same handle, makes
libcurl wrongly pass on the `Authorization:` header field meant for `hostA`,
to `hostB`.
When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off …
When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.
A flaw in libcurl's handling of HTTP/2 Server Push streams, when the parent
handle is set to share connections with other handles, can lead to
use-after-free in the cleanup process.
When reusing a libcurl handle for sequential transfers driven by
environment-variable proxy configuration, libcurl fails to clear the proxy
authentication state between requests. Specifically, if the initial transfer
authenticates against `proxyA` using Digest auth, a subsequent transfer routed
through `proxyB` erroneously leaks the `Proxy-Authorization:` h…
A flaw in curl’s cookie parsing logic allows a malicious HTTP server to set
"super cookies" that bypass the Public Suffix List check. This enables an
attacker-controlled origin to inject cookies that curl subsequently scopes and
transmits to unrelated third-party domains.
A vulnerability in input validation exists in curl <8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and "telnet options" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application's intent. This vulner…
A path traversal vulnerability exists in curl <8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user's home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary…
When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory. Further, this error condition fails silently…
When libpsl support is enabled, libcurl fails to enforce the Public Suffix
List boundary check when processing a `Set-Cookie` header where the `Domain`
attribute explicitly matches an origin host that is itself a public suffix
(e.g., `Domain=co.uk` set by `co.uk`).
Instead of coercing it into a strict host-only cookie, libcurl saves the
cookie with wildcar…
A vulnerability exists where a new transfer that uses STARTTLS to upgrade the
connection might reuse an existing live connection even though the TLS
configuration mismatches so it should not.
An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only).
curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session t…
When `CURLOPT_PINNEDPUBLICKEY` is configured alongside options that disable
standard peer verification (`CURLOPT_SSL_VERIFYPEER = 0` and
`CURLOPT_SSL_VERIFYHOST = 0`), libcurl fails to enforce public key pinning on
connections established without a presented server certificate. Bypassing the
pinning check under these disabled-verification conditions allows
…
A flaw in libcurl makes it wrongly reuse an existing HTTPS connection setup
for a given hostname even when using a different Native CA Store setting
(`CURLSSLOPT_NATIVE_CA`) than when the connection was created.
libcurl would reuse a previously created connection even when some mTLS config
related option had been changed that should have prohibited reuse.
libcurl keeps previously used connections in a connection pool for subsequent
transfers to reuse if one of them matches the setup. However, some TLS
settings related to client certificates were left out from the …
Using libcurl, when a custom `Host:` header is first set for an HTTP request
and a second request is subsequently done using the same *easy handle* but
without the custom `Host:` header set, the second request would use stale
information and pass on cookies meant for the first host in the second
request. Leak them.
libcurl might in some circumstances reuse the wrong connection for SMB(S)
transfers.
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criteria must be met. Due to a logical
error in the code, a network transfer operation that was requested by …
A use after free vulnerability exists in curl <v8.1.0 in the way libcurl offers a feature to verify an SSH server's public key using a SHA 256 hash. When this check fails, libcurl would free the memory for the fingerprint before it returns an error message containing the (now freed) hash. This flaw risks inserting sensitive heap-based data into the error me…
libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, m…
libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.
An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead.
A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response…
libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. …
When a libcurl-based application performs transfers via `SCP://` or `SFTP://`
and utilizes the `CURLOPT_SSH_KEYFUNCTION` callback, it may silently accept an
untrusted server. This vulnerability occurs when a server presents a host key
type that does not match the specific key type already recorded for that host
in the `known_hosts` file. Instead of rejectin…
When libcurl is asked to perform automatic gzip decompression of
content-encoded HTTP responses with the `CURLOPT_ACCEPT_ENCODING` option,
**using zlib 1.2.0.3 or older**, an attacker-controlled integer overflow would
make libcurl perform a buffer overflow.
libcurl might in some circumstances reuse the wrong connection when asked to
do Negotiate-authenticated ones, even when they are set to use different
"services".
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criteria must be met. Due to a l…
libcurl might in some circumstances reuse the wrong connection when asked to
do an authenticated HTTP(S) request after a Negotiate-authenticated one, when
both use the same host.
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criteria must b…
curl would wrongly reuse an existing HTTP proxy connection doing CONNECT to a
server, even if the new request uses different credentials for the HTTP proxy.
The proper behavior is to create or use a separate connection.
libcurl can in some circumstances reuse the wrong connection when asked to do
an Negotiate-authenticated HTTP or HTTPS request.
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criterion must first be met. Due to a
logical error in the code, a…
When curl is asked to use HSTS, the expiry time for a subdomain might
overwrite a parent domain's cache entry, making it end sooner or later than
otherwise intended.
This affects curl using applications that enable HSTS and use URLs with the
insecure `HTTP://` scheme and perform transfers with hosts like
`x.example.com` as well as `example.com` where the f…
When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine. If the returned status reports another error than 'revoked' (like for example 'unauthorized') it is not treat…
This flaw allows a malicious HTTP server to set "super cookies" in curl that
are then passed back to more origins than what is otherwise allowed or
possible. This allows a site to set cookies that then would get sent to
different and unrelated sites and domains.
It could do this by exploiting a mixed case flaw in curl's function that
verifies a given cooki…
An allocation of resources without limits or throttling vulnerability exists in curl <v7.88.0 based on the "chained" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable "links" in this "decompression chain" wascapped, but the cap was implemented on a …
curl < 7.84.0 supports "chained" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable "links" in this "decompression chain" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompr…
A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number.
When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. …
When doing multi-threaded LDAPS transfers (LDAP over TLS) with libcurl,
changing TLS options in one thread would inadvertently change them globally
and therefore possibly also affect other concurrently setup transfers.
Disabling certificate verification for a specific transfer could
unintentionally disable the feature for other threads as well.
curl might erroneously pass on credentials for a first proxy to a second
proxy.
This can happen when the following conditions are true:
1. curl is setup to use specific different proxies for different URL schemes
2. the first proxy needs credentials
3. the second proxy uses no credentials
4. while using the first proxy (using say `http://`), curl is asked…
A vulnerability exists where a connection requiring TLS incorrectly reuses an
existing unencrypted connection from the same connection pool. If an initial
transfer is made in clear-text (via IMAP, SMTP, or POP3), a subsequent request
to that same host bypasses the TLS requirement and instead transmit data
unencrypted.
An improper certificate validation vulnerability exists in curl <v8.1.0 in the way it supports matching of wildcard patterns when listed as "Subject Alternative Name" in TLS server certificates. curl can be built to use its own name matching function for TLS rather than one provided by a TLS library. This private wildcard matching function would match IDN (…
A denial of service vulnerability exists in curl <v8.1.0 in the way libcurl provides several different backends for resolving host names, selected at build time. If it is built to use the synchronous resolver, it allows name resolves to time-out slow operations using `alarm()` and `siglongjmp()`. When doing this, libcurl used a global buffer that was not mu…
A use after free vulnerability exists in curl <7.87.0. Curl can be asked to *tunnel* virtually all protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations. When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct after it had been freed, in its transfer shutdo…
When curl < 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.
When curl >= 7.20.0 and <= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* t…
An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.
Successfully using libcurl to do a transfer over a specific HTTP proxy
(`proxyA`) with **Digest** authentication and then changing the proxy host to
a second one (`proxyB`) for a second transfer, reusing the same handle, makes
libcurl wrongly pass on the `Proxy-Authorization:` header field meant for
`proxyA`, to `proxyB`.
When asked to both use a `.netrc` file for credentials and to follow HTTP
redirects, libcurl could leak the password used for the first host to the
followed-to host under certain circumstances.
When an OAuth2 bearer token is used for an HTTP(S) transfer, and that transfer
performs a redirect to a second URL, curl could leak that token to the second
hostname under some circumstances.
If the hostname that the first request is redirected to has information in the
used .netrc file, with either of the `machine` or `default` keywords, curl
would pass o…
When doing SSH-based transfers using either SCP or SFTP, and setting the
known_hosts file, libcurl could still mistakenly accept connecting to hosts
*not present* in the specified file if they were added as recognized in the
libssh *global* known_hosts file.
When an OAuth2 bearer token is used for an HTTP(S) transfer, and that transfer
performs a cross-protocol redirect to a second URL that uses an IMAP, LDAP,
POP3 or SMTP scheme, curl might wrongly pass on the bearer token to the new
target host.
curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS`in libcurl. This rarely used option is used to send variable=content pairs toTELNET servers.Due to flaw in the option parser for sending `NEW_ENV` variables, libcurlcould be made to pass on uninitialized data from a stack based buffer to theserver. Therefore potentially revealing se…
When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user's expectations and intentions and without tell…
curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single "static" variable in the library, which has the surprising side-effect that if an application sets up multiple concurr…
curl's code for managing SSH connections when SFTP was done using the wolfSSH
powered backend was flawed and missed host verification mechanisms.
This prevents curl from detecting MITM attackers and more.
A malicious server can serve excessive amounts of `Set-Cookie:` headers in a HTTP response to curl and curl < 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid send…
An information disclosure vulnerability exists in curl <v8.1.0 when doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously wasused to issue a `PUT` request which used that callback. This flaw may surprise …
When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a"sister site" to deny service to all siblings.
When asked to use a `.netrc` file for credentials **and** to follow HTTP
redirects, curl could leak the password used for the first host to the
followed-to host under certain circumstances.
This flaw only manifests itself if the netrc file has a `default` entry that
omits both login and password. A rare circumstance.
When asked to both use a `.netrc` file for credentials and to follow HTTP
redirects, curl could leak the password used for the first host to the
followed-to host under certain circumstances.
This flaw only manifests itself if the netrc file has an entry that matches
the redirect target hostname but the entry either omits just the password or
omits both log…
When doing SSH-based transfers using either SCP or SFTP, and asked to do
public key authentication, curl would wrongly still ask and authenticate using
a locally running SSH agent.
curl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server,…
VuXML only (0) · listed, port not fixed yet
None. pkg audit reports nothing for this version.
Fixed (0)
No VuXML entries for this package.
Commits (14)
Dima Panov (fluffy) · 7.76.1_13
ftp/linux-rl9-curl: upstream reroll for Rocky Linux 9.8
linux-rl9*: Stop installing build-id files
- They complicate pkg-plist manipulations
- They increase the package's size
- They are used for debugging and it is unlikely that someone would debug
binaries coming from Linux RPMs
*/*: Update Rocky Linux 9 packages to 9.5 release (+)
While here, hook up missed packages to resolve all 'not found' libraries
Sponsored by: Future Crew, LLC
*/*: Introduce Rocky Linux 9 32-bit compat librariries (+)
Finaly we can get Linux Steam utils works again! :)
While here, pet reative paths
Sponsored by: Future Crew, LLC
Linuxulator ports: Update Rocky Linux to 9.3 and add more packages
Sponsored by: Serenity Cybersecurity, LLC
Co-authored-by: awoonya <mzhyneva@gmail.com>