common/help.c in Geomview 1.9.5 does not validate strings before launching the program specified by the BROWSER environment variable, which might allow remote attackers to conduct argument-injection attacks via a crafted URL. NOTE: this is disputed by a third party because no untrusted input can be used for the injection
VuXML only (0) · listed, port not fixed yet
None. pkg audit reports nothing for this version.
Fixed (0)
No VuXML entries for this package.
Commits (88)
Muhammad Moinur Rahman (bofh) · 1.9.5_5
graphics/geomview: Moved man to share/man
Approved by: portmgr (blanket)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
Add USES=xorg USES=gl, ports categories g
Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
Revision bump of all ports with USE_GL after consolidation of mesa-libs
Approved by: swills (mentor)
Differential Revision: https://reviews.freebsd.org/D10845
Update the default version of GCC in the Ports Collection from GCC 4.7.4 to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Remove two libtool fixes from Mk/Uses/libtool.mk. They don't always work when an older version of a package is installed. This is the case when an executable links with installed libraries and with uninstalled libraries that link with other uninstalled libraries. For each of the directly linked libraries the executable will have an rpath (/usr/local/lib for the installed libraries and a path un
With this commit executables will overlink with uninstalled indirect
libraries again so their location is added to the rpath of the executable.
This partially reverts r358784.
PR: 191611
Approved by: portmgr (bapt)
Add 4 new sed commands to USES=libtool. The first two apply some of the changes that Debian made to their libtool. The first command applies to libtool versions 1.4 and up. The second command is somewhat more elaborate but essentially it uses the sed hold space to move an "elif...fi" block down. It applies to 2.x. Together these reduce overlinking to unpatched .la files (from ports that don't
The third and fourth command fix relinking. During staging libtool may
relink libA when it links to another library in the work directory libB.
The reason is that libA created during build phase has its runpath set to
the location of libB in the work directory. This allows running an
executable that links to libA from within the work directory. The relink
removes this extra runpath.
When libtool relinks libA it replaces "libB.la" on the linker command line
with "-L${STAGEDIR}${PREFIX}/lib -lB" with the intention to link to libB in
the stage directory but this -L flag isn't necessarily the first so another
libB may be linked instead. The two sed commands make relink the same as a
normal link. This means libtool will relink with libraries from the work
directory using a path similar to "../srcB/.libs/libB.so" without -L flags.
This applies to libtool 1.4 and up. Earlier versions don't seem to relink
libraries.
(This fixes ports like devel/apr1 so they link with freshly built libraries
instead of installed libraries.)
Fix all ports with missing libraries.
Additionally:
archivers/rpm4: USES=patchfix.
databases/gdbm: INSTALL_TARGET=install-strip.
devel/gnome-vfs: remove patch that doesn't change anything.
devel/ois: INSTALL_TARGET=install-strip and use standard USE_AUTOTOOLS.
devel/zziplib: INSTALL_TARGET=install-strip, MAKE_CMD.
multimedia/mjpegtools: remove USE_AUTOTOOLS, use modern compiler on i386
instead of disabling optimisations.
net/libnetdude: disable static plugins.
PR: 190941
Exp-run: antoine
Approved by: portmgr (antoine)
- Add staging support - Remove leading article from COMMENT - Convert to USES=tar:bzip2 - Use option helper - Move things to proper places and simplify where needed - Install striped binaries
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
- Update X.org ports to 7.4+ (few ports are more recent than the katamari). - Bump PORTREVISION for all ports depending on libglut since the shlib version number went from 4 to 3. - Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't installed anymore. - Couple of ports fixes (mostly missing xorg components added to USE_XORG).
- Fix a typo on this port that enables it to build again. - Label NOT_FOR AMD64 since it coredumps. - Sync the patches with those on CVS. - No functional change.
PR: 126037
Submitted by: "Pedro F. Giffuni" <pfgshield-freebsd at yahoo dot com>
- Update graphics/libglut to 6.4.1. - Shared lib version and PORTREVISION bumb for all affected ports.
While I'm here:
- Remove USE_MESA knob where it was (35 ports).
It marked as depricated for 2 years.
PR: ports/90247
Submitted by: Ermal Lu?i <eri--@albabsd.org>
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present in bsd.autotools.mk essentially makes this a no-op given that all the old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Maintenance update. Fix installation process. If someone would care to test this and give it the love it badly needs, please step up to the microphone.
Looked at by: fenner
Sponsored by: Weyland-Yutani Corporation