version as in the ports tree (latest) or the most common one (quarterly) · different version · ✗ not built · – no packages for this platform. Package sets that have not been rebuilt for 60 days are left out.
Unaddressed and VuXML only (0)
No unaddressed CVE and nothing reported by pkg audit for the packaged version 1.3.1,1.
Fixed (1)
Show 1 fixed
VuXML entries whose affected range the packaged version has left.
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
Switch all ports to use USES=xorg-cat
Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports
x11-toolkits/libXt: Update to 1.2.0
Update x11-toolkits/libXt to 1.2.0
This is a farily large update.
Changelog:
https://lists.x.org/archives/xorg/2019-June/059825.html
Sponsored by: B3 Init
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
Switch to xorgproto instead of individual packages
Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto. This update
tracks that change.
* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
instead depend on xorgproto. Bump portrevision.
* Delete the old *proto packages, update MOVED.
PR: 230023
Submitted by: zeising
Approved by: portmgr (antoine)
exp-run by: antoine
Misc X.org port updates:
Update gccmakedep to 1.0.3.
Update imake to 1.0.7.
Update libpciaccess to 0.13.3.
Update libdrm to 2.4.60.
Update bitmap to 1.0.8.
Update fstobdf to 1.0.6.
Update iceauth to 1.0.7.
Update libXdmcp to 1.1.2.
Update libXp to 1.0.3.
Update libXvMC to 1.0.9.
Update libXxf86vm to 1.1.4.
Update libxshmfence to 1.2.
Update randrproto to 1.4.1.
Update rgb to 1.0.6.
Update sessreg to 1.1.0.
Update xcb-util-cursor to 0.1.2.
Update xedit to 1.2.2.
Update xkbcomp to 1.3.0.
Update xkeyboard-config to 2.14.
Update xproto to 7.0.27.
Update xf86-input-mouse to 1.9.1.
Update xf86-input-synaptics to 1.8.2.
Update xf86-video-i710 to 1.3.5.
Update xf86-video-mga to 1.6.4.
Update xf86-video-tdfx to 1.4.6.
Update xf86-video-vmware to 13.1.0.
Update bdftopcf to 1.0.5.
Update font-util to 1.3.1.
Update fslsfonts to 1.0.5.
Update mkfontscale to 1.1.2.
Update showfont to 1.0.5.
Update xfs to 1.1.4.
Update xfsinfo to 1.0.5.
Remove :keepla from USES=libtool for X libraries in bsd.xorg.mk, and bump
all affected ports.
PR: 199400
Obtained from: Xorg-devel repo
When linking a library libA with a library libB using libtool, if libB.la exists, libtool will add all libraries libB.la refers to (dependency_libs field) to the linker command line and store them in the dependency_libs field of libA.la. So everything that subsequently links with libA will also link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
The FreeBSD x11@ and graphics team proudly presents a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.
Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.
Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.
Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.
Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics
Thanks to: all testers, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/187602 [1]
Approved by: portmgr (bdrewery), core (jhb)
Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0] If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG= to /etc/make.conf to get the old version.
Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0
Fix dissapearing cursor in xf86-video-vmware [2]
Stagify all x11@-owned ports
Bump portrevisions for xf86-* ports due to xserver version change.
Fix fallout from updates where needed.
Thanks to: all testersi, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/184684 [1], ports/181385 [2]
Submitted by: Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by: portmgr (bdrewery), core (jhb) [0]
The FreeBSD x11 team proudly presents an zeising, kwm, miwi, bapt, eadler production:
Xorg 7.7
Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.
PR: ports/177942
Exp-run by: miwi
Approved by: portmgr (miwi)
Thanks to all who helped testing!
Fix the build of xorg related ports when the base system is compiled with clang as system compiler and cpp is clang cpp (as opposed to GNU cpp). This is done by removing the configure test for cpp completely. Using clang cpp will make some manual pages as well as some scripts get slightly wierd whitespace formatting. However, it does not affect the function of the scripts or the instructions in
PR: ports/166373
Submitted by: Jakub Lach <jakub_lach@mailplus.pl> (PR)
Patch by: me (with ideas from PR and mailing list)
Tested by: Jakub Lach <jakub_lach@mailplus.pl>, me
Approved by: kwm (mentor)
Obtained from: xorg staging area
- Please welcome Xorg 7.5.2
The Xorg Team is pleased to announce the next round of Xorg updates.
The team created a new flag called WITH_NEW_XORG that users can include
in /etc/make.conf. This was created for the intel KMS work being done
althouthough It probably works for other chips. Unfortunately, the intel
KMS driver will only work on FreeBSD 9(RELENG|STABLE) or 10/HEAD users.
Older version of FreeBSD will not be supported. Intel users will need
to patch their source manually with Konstantin?s KMS kernel patch to get
the newer chips to work. Please carefully read UPDATING entry.
Changes:
- libdrm 2.4.31 (including KMS support)
- mesa 7.11.2
- xorg-server 1.10.6
- a lot of new Graphic Drivers.
I would like to thank:
Koop Mast
Eitan Adler
Niclas Zeising
and all helpers and testers from x11@.
- Please welcome Xorg 7.5.1
The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.
I would like to thank:
Beat Gaetzi
Dima Panov
Koop Mast
Eitan Adler
and all Testers.
PR: ports/147646
ports/148035
ports/148744
ports/150223
ports/152889
ports/154457
- Update to Xorg 7.5
The Intel drivers was patched to work with
the new server. The drivers for Vesa, NV,NVIDIA and
ATI have been tested thoroughfully and seem to work fine.
A complete changelog of Xorg 7.5 can you read here:
http://www.x.org/releases/X11R7.5/
A note to FreeBSD 6.X users: We strongly recommend you
to update your system to 7.x or above.
For updating try
portupgrade -af \*
or:
portmaster -af
Please report any problems and issus to x11 (at) FreeBSD.org.
Thanks to beat@, rnoland@, fluffy@, stas@ and all testers for their help
and Feeback.
Tested by: Community and 2x exp-runs
- Mark xtrans as a BUILD_DEPENDS only (unless specified otherwise with :both) - Bump PORTREVISION on ports having xtrans in USE_XORG. - Add some missing dependencies in various xorg libraries.
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present in bsd.autotools.mk essentially makes this a no-op given that all the old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.