x11-clocks/eyeclock2.0_5

MANPREFIX: eleminate its usage  and move man to share/man

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

x11-clocks: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Anders Nordby <anders@fix.no>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Brian Handy <handy@physics.montana.edu>
  *  Chris D. Faulhaber <jedgar@FreeBSD.org>
  *  Chris Piazza <cpiazza@FreeBSD.org>
  *  David Leonard <leonard@dstc.edu.au>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  FURUSAWA, Kazuhisa <kazu@jp.freebsd.org>
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Harold Gutch <logix@foobar.franken.de>
  *  Hendrik Scholz <hscholz@raisdorf.net>
  *  J Han <hjh@best.com>
  *  KIRIYAMA Kazuhiko <kiri@pis.toba-cmt.ac.jp>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Lars Koeller <lkoeller@cc.fh-lippe.de>
  *  Martin Wilke (miwi@FreeBSD.org)
  *  Nobuhiro Yasutomi
  *  Patrick Li <pat@databits.net> et al
  *  Per Otterstr=F6m <pelle@fukt.bth.se>
  *  Randall Hopper <aa8vb@ipass.net>
  *  Rich Neswold <rneswold@mcs.net>
  *  Roman Bogorodskiy <bogorodskiy@inbox.ru>
  *  Ulrich Spoerlein <uspoerlein@gmail.com>
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  desmo@bandwidth.org
  *  gpalmer
  *  gurkan@phys.ethz.ch
  *  obrien@NUXI.com

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Unbreak.

PR:		208724
Submitted by:	tkato432 yahoo com
Sponsored by:	Absolight

Mark a few ports BROKEN: unfetchable

Cleanup plist

Rename x11-*/ patch-xy patches to reflect the files they modify.

Finally, this is the last of it.

The FreeBSD x11@ and graphics team proudly presents a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat: x11-clocks)

- X11BASE is going away. Hack the last few ports that depend on X11BASE to not rely on it being set globally.

Approved by:	portmgr (pav)

Remove WWW entries from unmaintained ports that return 404 or where the domain disappeared.

Fix master_site

- Get Rid MD5 support

For ports maintained by ports@FreeBSD.org, remove names and/or e-mail addresses from the pkg-descr file that could reasonably be mistaken for maintainer contact information in order to avoid confusion on the part of users looking for support. As a pleasant side effect this also avoids confusion and/or frustration for people who are no longer maintaining those ports.

- Remove USE_X_PREFIX - Add USE_XORG= (modules) - Bump portrevision

- Welcome X.org 7.2 \o/. - Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}. - Bump PORTREVISION for ports intalling files in ${X11BASE}.

Remove USE_REINPLACE from categories starting with X

- Add SHA256

- Fix MASTER_SITES. - Support CC/CFLAGS properly.

PR:		ports/79755
Submitted by:	Ports Fury

Reset MAINTAINER to ports@. We cannot contact them for a long time.

Discussed with:	hrs
Approved by:	kiri(blanket), mita(blanket),
		shige(blanket), taoka(blanket)

SIZEify (maintainer timeout)

Clear moonlight beckons. Requiem mors pacem pkg-comment, And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Style fixes for x11-clocks.

(1) Add new variable, XFREE86_VERSION, to specify which version of     XFree86 (3 or 4) to depend to when USE_XLIB is set.     XFREE86_VERSION defaults to 3 for now, but adventurous users can     override it in /etc/make.conf.  When XFREE86_VERSION=3, USE_XLIB     will add a dependency to x11/XFree86; when it is set to 4, the     dependency will be to x11/XFree86-4-libraries.  When     XFREE86_VER

Since XFree86 version 4 includes some software that used to be
    separate ports, when XFREE86_VERSION=3 the following variables are
    provided:

    USE_DGS		LIB_DEPENDS on x11/dgs
    USE_FREETYPE	LIB_DEPENDS on print/freetype
    USE_MESA		LIB_DEPENDS on graphics/Mesa3
    USE_XPM		LIB_DEPENDS on graphics/xpm

    When XFREE86_VERSION=4, these variables have no effect.  The
    LIB_DEPENDS in the tree for the above four ports have all been
    converted to the USE_* counterparts.  For your information, this
    is the count of the number of ports:

    USE_DGS		0
    USE_FREETYPE	16
    USE_MESA		36
    USE_XPM		236

    There is a new variable, XAWVER, which is set to 6 when
    XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4.  This is also
    passed to PLIST_SUB so ports that build Xaw based shared libraries
    can use this variable to substitute the shlib version number.

    There is also a provision of using a separate mtree file for
    XFREE86_VERSION=4, but that part is not enabled yet.

Reviewed by:	the ports list
Tested by:	make index (XFREE86_VERSION=3 only)

(2) Add hebrew to list of valid categories.
Submitted by:	nbm

Update with the new PORTNAME/PORTVERSION variables

Update to version 2.0.

PR:		15681
Submitted by:	Hiroaki Sakai <akai@miya3f12.ee.kagu.sut.ac.jp>

$Id$ -> $FreeBSD$

#4/4 enforcing Caps, no period

[Has anyone figured-out what makes the number 393 so interesting to PW, now?]

I wonder what was going through Jordan's head during his infamous
$Id$-smashing commit.

Before I forget....

Thanks to naddy@mips.rhein-neckar.de (Christian Weisgerber) for prompting
this commit.  See msg-id: 7geokh$tje$1@mips.rhein-neckar.de

Upgrade to 1.03.

Category name is "x11-clocks", not "x11-clock". ;)

Pointed out by:	steve

Fix build in a.out world.

Noticed by:	Asami-san

Make these build in an ELF world and use MAN1 for manpages.

Roll back libXpm major to 4.  Sorry, it wasn't a good idea to bump it in the first place.

libXpm major is now 5.  Also remove regexp support in preparation for ELF conversion.

A clock like xeye. PR:		ports/7829 Submitted by:	KIRIYAMA Kazuhiko <kiri@pis.toba-cmt.ac.kp>