x11-toolkits/libXaw 1.0.16,2

xorg-cat.mk users: Drop tar:xz, which is default now

PR:		298092

x11-toolkits/libXaw: update to 1.0.16

Remove GNU_CONFIGURE_MANPREFIX

Changes: https://gitlab.freedesktop.org/xorg/lib/libxaw/-/compare/libXaw-1.0.14...libXaw-1.0.16
Reviewed by:	diizzy, jbeich
Tested by:	arrowd
Pull Request:	https://github.com/freebsd/freebsd-ports/pull/273
Sponsored by:   Serenity Cybersecurity, LLC

x11-toolkits/libXaw: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Dima Sivachenko <dima@Chg.RU>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Igor Pokrovsky <ip@doom.homeunix.org>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Juli Mallett
  *  Kenjiro Cho <kjc@csl.sony.co.jp>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.de>
  *  Lubomir Marinov <lubomir_m@abv.bg>
  *  Marc Recht <marc@informatik.uni-bremen.de>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Grünewald <michipili@gmail.com>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Mike Krutov <neko@takino.org>
  *  Mike Meyer <mwm@mired.org>
  *  Olivier Duchateau
  *  Paul Schmehl <pauls@utdallas.edu>
  *  Peter Hawkins <thepish@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Radim Kolar
  *  Rene Ladan <rene@FreeBSD.org>
  *  Robert C. Noland III <rnoland@FreeBSD.org>
  *  Simon Barner <barner@gmx.de>
  *  Stephane Legrand <stephane@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tom McLaughlin <tmclaugh@sdf.lonestar.org>
  *  Vanilla I. Shu <vanilla@MinJe.com.TW>
  *  Will Andrews <andrews@technologist.com>
  *  Yukihiro Nakai <nakai@FreeBSD.org>
  *  Zane C, Bowers <vvelox@vvelox.net>
  *  asami
  *  chinsan
  *  chuckr
  *  clsung@dragon2.net
  *  dmitry@karasik.eu.org
  *  fjoe@FreeBSD.org
  *  gahr
  *  gena
  *  ijliao
  *  mi
  *  minter@lunenburg.org
  *  nivit@users.sourceforge.net
  *  ports@c0decafe.net
  *  roland.jesse@gmx.net
  *  thierry@pompo.net
  *  vanilla

With hat:	portmgr

x11-toolkits/libXaw: update to 1.0.14

Changes:	https://lists.x.org/archives/xorg-announce/2021-March/003077.html
PR:		255773
Reported by:	portscout
Approved by:	zeising
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D30205

Remove # $FreeBSD$ from Makefiles.

x11-toolkits/libXaw: Remove dependency on libXp

Remove libXaw dependency on libXp, since it is not needed.
While here, add USES=xorg xorg-cat.

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

Switch to xorgproto instead of individual packages

Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto.  This update
tracks that change.

* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
  bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
  instead depend on xorgproto.  Bump portrevision.
* Delete the old *proto packages, update MOVED.

PR:		230023
Submitted by:	zeising
Approved by:	portmgr (antoine)
exp-run by:	antoine

- Add LICENSE - Pet portlint - Update WWW

Approved by:	portmgr blanket

Update libXaw to 1.0.13.

Obtained from:	Xorg devel repo

Misc X.org port updates:

Update gccmakedep to 1.0.3.
Update imake to 1.0.7.
Update libpciaccess to 0.13.3.
Update libdrm to 2.4.60.
Update bitmap to 1.0.8.
Update fstobdf to 1.0.6.
Update iceauth to 1.0.7.
Update libXdmcp to 1.1.2.
Update libXp to 1.0.3.
Update libXvMC to 1.0.9.
Update libXxf86vm to 1.1.4.
Update libxshmfence to 1.2.
Update randrproto to 1.4.1.
Update rgb to 1.0.6.
Update sessreg to 1.1.0.
Update xcb-util-cursor to 0.1.2.
Update xedit to 1.2.2.
Update xkbcomp to 1.3.0.
Update xkeyboard-config to 2.14.
Update xproto to 7.0.27.
Update xf86-input-mouse to 1.9.1.
Update xf86-input-synaptics to 1.8.2.
Update xf86-video-i710 to 1.3.5.
Update xf86-video-mga to 1.6.4.
Update xf86-video-tdfx to 1.4.6.
Update xf86-video-vmware to 13.1.0.
Update bdftopcf to 1.0.5.
Update font-util to 1.3.1.
Update fslsfonts to 1.0.5.
Update mkfontscale to 1.1.2.
Update showfont to 1.0.5.
Update xfs to 1.1.4.
Update xfsinfo to 1.0.5.

Remove :keepla from USES=libtool for X libraries in bsd.xorg.mk, and bump
  all affected ports.

PR:		199400
Obtained from:	Xorg-devel repo

- Drop @dirrm* from and add empty directories to pkg-plists

Approved by:	portmgr blanket, kwm (for gnome@ ports)

When linking a library libA with a library libB using libtool, if libB.la exists, libtool will add all libraries libB.la refers to (dependency_libs field) to the linker command line and store them in the dependency_libs field of libA.la.  So everything that subsequently links with libA will also link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

The FreeBSD x11@ and graphics team proudly presents a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0] If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG= to /etc/make.conf to get the old version.

Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0

Fix dissapearing cursor in xf86-video-vmware [2]

Stagify all x11@-owned ports

Bump portrevisions for xf86-* ports due to xserver version change.

Fix fallout from updates where needed.

Thanks to:	all testersi, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/184684 [1], ports/181385 [2]
Submitted by:	Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by:	portmgr (bdrewery), core (jhb) [0]

The FreeBSD graphics/x11 team proudly presents a kwm, zeising production:

MESA 9.1.6

Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)

Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
When updating MESA related ports (libGL, dri) you need to remove old versions
first.  See UPDATING for details.

PR:		ports/181962 [2]
Submitted by:	marius [1]
		zeising [2]
Exp-run by:	bdrewery
Approved by:	portmgr (bdrewery)

Thanks to all who helped testing!

Add NO_STAGE all over the place in preparation for the staging support (cat: x11-toolkits)

The FreeBSD x11 team proudly presents an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.

PR:		ports/177942
Exp-run by:	miwi
Approved by:	portmgr (miwi)

Thanks to all who helped testing!

- Update Makefile to respect NOPORTDOCS - Trim pkg-plist, use PORTDOCS= macro to enable easier updates in the future - No PORTREVISION bump since this does not change default package

PR:		ports/165820
Submitted by:	scheidell@ (me)
Approved by:	x11 (maintainer, timeout 60 days)

- Please welcome Xorg 7.5.2

The Xorg Team is pleased to announce the next round of Xorg updates.
       The team created a new flag called WITH_NEW_XORG that users can include
       in /etc/make.conf. This was created for the intel KMS work being done
       althouthough It probably works for other chips. Unfortunately, the intel
       KMS driver will only work on FreeBSD 9(RELENG|STABLE) or 10/HEAD users.
       Older version of FreeBSD will not be supported. Intel users will need
       to patch their source manually with Konstantin?s KMS kernel patch to get
       the newer chips to work. Please carefully read UPDATING entry.

Changes:

        - libdrm 2.4.31 (including KMS support)
        - mesa 7.11.2
        - xorg-server 1.10.6
        - a lot of new Graphic Drivers.

    I would like to thank:

         Koop Mast
         Eitan Adler
         Niclas Zeising
         and all helpers and testers from x11@.

Avoid automagical creation of xmlto files

Submitted by:	dougb

Backout previous commit due to missing dependencies not picked up by a tinderbox run

Reported by:	x11@ mailing list
Reviewed by:	miwi
Pointyhat to:	me

Update to 1.0.9

Changes:
	This release includes several bug fixes, as well as the usual set
	of recent build configuration improvements & janitorial cleanups.

Reviewed by:	miwi
Obtained from:	xorg-dev repo

- Remove WITH_FBSD10_FIX, is no longer needed

- Fix build on FreeBSD 10.0

Notes: all x11@ ports fixed for FreeBSD 10

- Please welcome Xorg 7.5.1

The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.

I would like to thank:

	Beat Gaetzi
	Dima Panov
	Koop Mast
	Eitan Adler
	and all Testers.

PR:		ports/147646
		ports/148035
		ports/148744
		ports/150223
		ports/152889
		ports/154457

- Update to Xorg 7.5

The Intel drivers was patched to work with
the new server. The drivers for Vesa, NV,NVIDIA and
ATI have been tested thoroughfully and seem to work fine.
A complete changelog of Xorg 7.5 can you read here:

http://www.x.org/releases/X11R7.5/

A note to FreeBSD 6.X users: We strongly recommend you
to update your system to 7.x or above.

For updating try

portupgrade -af \*

or:

portmaster -af

Please report any problems and issus to x11 (at) FreeBSD.org.

Thanks to beat@, rnoland@, fluffy@, stas@ and all testers for their help
and Feeback.

Tested by:	Community and 2x exp-runs

- Update X.org ports to 7.4+ (few ports are more recent than the katamari). - Bump PORTREVISION for all ports depending on libglut since the shlib version number went from 4 to 3. - Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't installed anymore. - Couple of ports fixes (mostly missing xorg components added to USE_XORG).

Fix pkg-descr.

PR:		ports/122353
Submitted by:	Dmitry Marakasov <amdmi3@amdmi3.ru>

- Mark xtrans as a BUILD_DEPENDS only (unless specified otherwise with :both) - Bump PORTREVISION on ports having xtrans in USE_XORG. - Add some missing dependencies in various xorg libraries.

- Update X.org ports to 7.3. - Mark XFree86-4 as DEPRECATED with EXPIRATION_DATE set to 2007-12-25. I hope that nobody will be bored enough on Christmas to remove them on that day.

Tested by:	vehemens, Rene Ladan, Beech Rintoul, sarek on x11@

Update to 1.0.3.

PR:		ports/113593
Submitted by:	chinsan

- Welcome X.org 7.2 \o/. - Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}. - Bump PORTREVISION for ports intalling files in ${X11BASE}.

Conversion to a single libtool environment.

Approved by:	portmgr (kris)

SHA256ify

Approved by: krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present in bsd.autotools.mk essentially makes this a no-op given that all the old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Fix up plist after modifications to mtree (BSD.x11-4.dist rev. 1.27).

At Kris's request, back out the MACHINE_ARCH spelling correction until after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Generate proper package listing when using new mtree from xorg-server port.

Remove hardcoding of MTREE_FILE. This is handled in bsd.port.mk since rev. 1.503 for ${PREFIX} == ${XPREFIX} cases.

Fix MASTER_SITES.

Register missing CONFLICTS, mostly on xorg-libraries-*

Reported by:	Kent Stewart <kstewart@owt.com>

Update to 7.0.2.

Use the right MTREE_FILE

Reported by:	kris

Add a missing RUN_DEPENDS on libXpm.

Reported by:	bento via kris

* Add a missing build dependency on xextensions [1] * Add a man page to MAN3

Reported by:	bento via kris [1]