net-mgmt/py-napalm 5.2.0

net-mgmt/py-napalm: Update to 5.2.0

Changelog:

https://github.com/napalm-automation/napalm/releases/tag/5.2.0

net-mgmt/py-napalm: Update to 5.1.0

* Switch to the PEP517 build framework to make it future-proof
  while I'm here.

Changelog:

https://github.com/napalm-automation/napalm/releases/tag/5.1.0

PR:		293438
Co-Authored-by: Kai Knoblich <kai@FreeBSD.org>

security/libsodium: Update to 1.0.21

The API remains compatible but bumping all dependent ports as SHLIB
has changed.

Changelog: https://github.com/jedisct1/libsodium/releases/tag/1.0.21-RELEASE
Security: https://00f.net/2025/12/30/libsodium-vulnerability/
PR: 279347

*/*: switch dependency from devel/py-lxml5 to devel/py-lxml

Currently, there are two versions of python XML processing library
which conflict each other in the ports tree, namely:
- devel/py-lxml5 (now at version 5.4.0)
- devel/py-lxml  (now at version 6.0.1)

To avoid the situation that some ports depend on py-lxml5 and some
others do on py-lxml (by switching dependencies individually), this
commit switches the dependencies from py-lxml5 to py-lxml at once.

Additional note: There are still two ports (textproc/py-rdflib and
www/py-draftjs-exporter) depending on py-lxml5 since they limit upper
version to less than 6.

PR:		289491
Approved by:	Michiel van Baak Jansen <michiel@vanbaak.eu>, arrowd,
		crees, madpilot, delphij, marcus, nivit, kai,
		skreuzer, fluffy, bofh, thierry, stephen, sunpoet,
		0mp, Eric Camachat <eric@camachat.org>

*/*: update dependency on devel/py-lxml to devel/py-lxml5 (2nd attempt)

This is a follow up to the commit 230fb2661c78, which updated some
ports' dependencies on devel/py-lxml to devel/py-lxml5. It was an
attempt to follow the dependency change of
www/py-beautifulsoup. However, the switch was incomplete and broke
some other ports.

It has turned out that the ports depending on devel/py-lxml (at
version 4.9.3) does not limit their dependencies' upper bound to 4.x
except for one (devel/py-pymaven-patch). So updating them to
devel/py-lxml5 (at version 5.4.0) should cause no harm.

This commit switch dependencies of all the ports (except
devel/py-pymaven-patch) to devel/py-lxml5 avoid potential conflicts.

Co-authored-by: Daniel Engberg <diizzy@FreeBSD.org>

PR:		287144, 288047
Reported by:	makc (via ports-committers),
		vvd (PR 288047),
		diizzy (PR 287144)
Approved by:	portmgr (chase dependency change, unbreak build)
Fixes:		230fb2661c78 (*/*: update dependency on devel/py-lxml to devel/py-lxml5)

python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal

Any missed ports, feel free to bump.

Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.

devel/py-pyyaml: Move devel/py-yaml to devel/py-pyyaml

- Bump PORTREVISION of dependent ports for dependency change

net-mgmt/py-napalm: Update to 5.0.0

* Convert the test suite to USE_PYTHON=pytest while I'm here.

Changelog:

https://github.com/napalm-automation/napalm/releases/tag/5.0.0

MFH:		No (contains breaking changes)

security/libsodium: update to 1.0.19, bump dependent ports

PR:	278259
Reported by:	Andrey Korobkov <alster-vinterdalen.se>

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

net-mgmt/py-napalm: Update to 4.1.0

* Remove a no longer required patch.

Changelog:

https://github.com/napalm-automation/napalm/releases/tag/4.1.0

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

net-mgmt/py-napalm: Update to 4.0.0

Changelog:

https://github.com/napalm-automation/napalm/releases/tag/4.0.0

MFH:		No (feature release, requires newer version of NetMiko)

net-mgmt/py-napalm: Update to 3.4.0

Changelog:

https://github.com/napalm-automation/napalm/releases/tag/3.4.0

net-mgmt/py-napalm: Limit Python versions

* Prepare the port by limiting the Python version to 3.7+ for the
  imminent update of net-mgmt/py-ciscoconfparse which also require this.

net-mgmt/py-napalm: Update to 3.3.1

* Modernize "do-test" target while I'm here.

Changelogs since 3.2.0:

https://github.com/napalm-automation/napalm/releases/tag/3.3.1
https://github.com/napalm-automation/napalm/releases/tag/3.3.0

MFH:		2021Q3

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

net-mgmt/py-napalm: Update to 3.2.0

Changelog:

https://github.com/napalm-automation/napalm/releases/tag/3.2.0

net-mgmt/py-napalm: Update to 3.1.0

Changelog:

Core changes:
* Fix: force_no_enable enabled on ios and nx only
* lxml text retrieval (find_txt) shouldn't fail if no text element available

NX-OS:
* Initial version for nxos_ssh get_optics
* Fixed get_bgp_neighbors and asdot notation on NX-OS

Junos:
* Fix "KeyError in get_environment() on Juniper MX10k3 with Junos 19.2R1.8
  by making PEM naming consistent

IOS
* Fix get_optics metric
* Allow username detection on older Cisco ios versions

https://github.com/napalm-automation/napalm/releases/tag/3.1.0

MFH:		2020Q3

net-mgmt/py-napalm: Update to 3.0.1:

* Add some instructions to cope with the command changes that were
  introduced to newer versions of Arista EOS.

Changelog:

Junos:
* Close configuration in case "configure_private" is set to avoid configure
  session to stay forever

IOS:
* "get_interfaces_counters" broken with Managment Interface
* "get_optics" does not work on VSS setup
* "get_optics" broken if input value is N/A

NXOS:
* Fix "cmd_verify" and null character

https://github.com/napalm-automation/napalm/releases/tag/3.0.1

MFH:		2020Q2 (Blanket: Bugfix release)

net-mgmt/py-napalm: Update to 3.0.0

* Remove the patch that fixed some issues with net-mgmt/py-junos-eznc as it
  has been merged by upstream.

  Get rid of the post-patch target as well because it's no longer required.

Changelog with some notable changes/fixes:

General:
* Integrated nxapi_plumbing and pyIOSXR into NAPALM.
* Updated support for TwoGigabit & TwentyFiveGig interfaces to
  canonical_map.py

NXOS:
* Fix exception when trying to get environmental data from certain Nexus
  devices

IOS:
* Fix traceroute output parsing in ios
* Fix vrf detection when no vrf is defined
* Fix show interfaces summary for 10/40/100 Gig Interfaces
* Fix get_bgp_neighbors_detail

IOS-XE:
* Update to handle Cisco ISR mac address table with multiple EHWIC modules
  installed

IOS-XR:
* Add support for XML namespace prefixes in find_txt

Junos:
* Added auto_probe optional argument
* Add support for configure private in Junos
* SRX cluster devices stack RPC replies under multi-routing-engine-results

https://github.com/napalm-automation/napalm/releases/tag/3.0.0

MFH:		2020Q2

net-mgmt/py-{napalm,pyIOSXR}: Drop support for Python 2.7 and 3.5

Prepare both ports for the 3.0.0 release of security/py-netmiko, which
dropped support for Python 2.7 and 3.5, to avoid errors when using
"bulk -a".

net-mgmt/py-napalm: Update to 2.5.0

* Add a patch that fixes the unittests with net-mgmt/py-junos-eznc >= 2.3.0

* Switch to GitHub for a while to make use of the test-suite that isn't
  available in the sdist, yet.

* Add "do-test" target to make future QA easier.

Changelog:

Note: This is the last release supporting Python 2. Going forward, only
      Python 3.6+ will be supported.

https://github.com/napalm-automation/napalm/releases/tag/2.5.0

MFH:		2019Q4

Bump a few PORTREVISIONs after r498529

With hat:	portmgr

net-mgmt/py-napalm: Update to 2.4.0

While I'm here:
* Add location to license file

Changelog:

* Many bugfixes and improvements (total count of 42 to be exact)

https://github.com/napalm-automation/napalm/releases/tag/2.4.0

Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D19439

Change my maintainer email address to my new one at the FreeBSD project.

Reviewed by:	miwi (mentor)
Approved by:	miwi (mentor)
Differential Revision: https://reviews.freebsd.org/D19050

net-mgmt/py-napalm: Update to 2.3.3

PR:		232882
Submitted by:	Kai <freebsd_ports@k-worx.org> (maintainer)

net-mgmt/py-napalm: Update to 2.3.2

PR:		231091
Submitted by:	Kai <freebsd_ports@k-worx.org> (maintainer)

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

net-mgmt/py-napalm: update to 2.3.1

Changelog: https://github.com/napalm-automation/napalm/releases/tag/2.3.1

PR:		227503
Submitted by:	Kai <freebsd_ports@k-worx.org> (maintainer)

New port: net-mgmt/py-napalm: Net Automation and Progr. Abstraction Layer with Multivendor support

PR:		227098
Submitted by:	Kai <freebsd_ports@k-worx.org>