net-mgmt/py-ncclient0.7.0

net-mgmt/py-ncclient: Update to 0.7.0

* Switch to the PEP517 build framework to make it future-proof.

Changelogs since 0.6.15:

https://github.com/ncclient/ncclient/compare/v0.6.15...v0.7.0

PR:		288944
Reported by:	pi
Approved by:	maintainer timeout

security/libsodium: Update to 1.0.21

The API remains compatible but bumping all dependent ports as SHLIB
has changed.

Changelog: https://github.com/jedisct1/libsodium/releases/tag/1.0.21-RELEASE
Security: https://00f.net/2025/12/30/libsodium-vulnerability/
PR: 279347

*/*: switch dependency from devel/py-lxml5 to devel/py-lxml

Currently, there are two versions of python XML processing library
which conflict each other in the ports tree, namely:
- devel/py-lxml5 (now at version 5.4.0)
- devel/py-lxml  (now at version 6.0.1)

To avoid the situation that some ports depend on py-lxml5 and some
others do on py-lxml (by switching dependencies individually), this
commit switches the dependencies from py-lxml5 to py-lxml at once.

Additional note: There are still two ports (textproc/py-rdflib and
www/py-draftjs-exporter) depending on py-lxml5 since they limit upper
version to less than 6.

PR:		289491
Approved by:	Michiel van Baak Jansen <michiel@vanbaak.eu>, arrowd,
		crees, madpilot, delphij, marcus, nivit, kai,
		skreuzer, fluffy, bofh, thierry, stephen, sunpoet,
		0mp, Eric Camachat <eric@camachat.org>

*/*: update dependency on devel/py-lxml to devel/py-lxml5 (2nd attempt)

This is a follow up to the commit 230fb2661c78, which updated some
ports' dependencies on devel/py-lxml to devel/py-lxml5. It was an
attempt to follow the dependency change of
www/py-beautifulsoup. However, the switch was incomplete and broke
some other ports.

It has turned out that the ports depending on devel/py-lxml (at
version 4.9.3) does not limit their dependencies' upper bound to 4.x
except for one (devel/py-pymaven-patch). So updating them to
devel/py-lxml5 (at version 5.4.0) should cause no harm.

This commit switch dependencies of all the ports (except
devel/py-pymaven-patch) to devel/py-lxml5 avoid potential conflicts.

Co-authored-by: Daniel Engberg <diizzy@FreeBSD.org>

PR:		287144, 288047
Reported by:	makc (via ports-committers),
		vvd (PR 288047),
		diizzy (PR 287144)
Approved by:	portmgr (chase dependency change, unbreak build)
Fixes:		230fb2661c78 (*/*: update dependency on devel/py-lxml to devel/py-lxml5)

python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal

Any missed ports, feel free to bump.

Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.

net-mgmt/py-ncclient: Update to 0.6.15

Changelog since 0.6.13:

https://github.com/ncclient/ncclient/compare/v0.6.13...v0.6.15

PR:		278678
Approved by:	maintainer timeout (3+ weeks)

security/libsodium: update to 1.0.19, bump dependent ports

PR:	278259
Reported by:	Andrey Korobkov <alster-vinterdalen.se>

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

net-mgmt/py-ncclient: Update to 0.6.13

Changelog since 0.6.10:

https://github.com/ncclient/ncclient/compare/v0.6.10...v0.6.13

PR:		265270
Approved by:	Sergey Akhmatov (maintainer)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

net-mgmt/py-ncclient: Update to 0.6.10

Changes: https://github.com/ncclient/ncclient/releases/tag/v0.6.10

PR:		254095
Submitted by:	Sergey Akhmatov <sergey AT akhmatov DOT ru> (maintainer)

Remove py27_*_DEPENDS lines from ports using Python 3.6+ only.

While here adjust a related comment in graphics/py-traitsui

Drop python 2.7 support from a few ports

With hat:	portmgr

Update to 0.6.7

Changes:	https://github.com/ncclient/ncclient/releases
PR:		243424
Submitted by:	Sergey Akhmatov <sergey@akhmatov.ru> (maintainer)

net-mgmt/py-ncclient: Update to 0.6.6

Changelog:

* Read ssh timeout from config file if not specified in method call
* Tox support
* Huge XML tree parser support
* Adding optional bind address to connect

https://github.com/ncclient/ncclient/releases/tag/v0.6.6

PR:		238247
Submitted by:	Sergey Akhmatov <sergey@akhmatov.ru> (maintainer)

net-mgmt/py-ncclient: Update to 0.6.4

While I'm here:
* Pet portlint

Changelog:

* Pin selectors2 to Python versions <= 3.4 (and remove the now obsolete
  patch-requirements.txt)
* Fix config examples to actually use the nc namespace
* Fix: Correctly set port for paramiko when using ssh_config file
* Test: Add test to check ProxyCommand uses correct port
* Update commits for py3
* Enhance Alcatel-Lucent -support
* Juniper RPC: Allow specifying format in CompareConfiguration
* Parsing of NETCONF 1.1 frames no longer decodes each chunk of bytes...
* Fix filter in create_subscription
* Validate 'with-defaults' mode based on supported modes advertised in
  capability URI

PR:		237154
Submitted by:	Sergey Akhmatov (maintainer)
Approved by:	mentors (implicit)

net-mgmt/py-ncclient: Fix requirements.txt

PR:		232883
Submitted by:	Kai <freebsd_ports@k-worx.org>
Approved by:	Sergey Akhmatov <sergey@akhmatov.ru> (maintainer)

net-mgmt/py-ncclient: update to 0.6.3

PR:		231764
Submitted by:	Sergey Akhmatov <sergey@akhmatov.ru> (maintainer)

net-mgmt/py-ncclient: Update to 0.6.2.

- Add conditional RUN_DEPENDS on devel/py-selectors2.

PR:		230874
Submitted by:	John W. O'Brien <john@saltant.com>
Reviewed by:	Sergey Akhmatov <sergey@akhmatov.ru> (maintainer)
Reviewed by:	tobik (previous version)
Reviewed by:	wen
Approved by:	mat (mentor)
Approved by:	Sergey Akhmatov <sergey@akhmatov.ru> (maintainer)
Differential Revision:	https://reviews.freebsd.org/D17231

Maintainership back to Submitter

PR:		229673
Submitted by:	Sergey Akhmatov <sergey@akhmatov.ru>
Approved by:	joneum, Kai (freebsd_ports@k-worx.org>

- Pass maintainership to submitter

PR:		229529 229530 229531
Submitted by:	freebsd_ports@k-worx.org
Sponsored by:	iXsystems Inc.

- Reset MAINTAINERship due to multiple fatal email bounced

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

New port: net-mgmt/py-ncclient: Python library for NETCONF clients

PR:		224342
Submitted by:	Sergey Akhmatov <sergey@akhmatov.ru>