sysutils/bamf0.5.6_4

*/*: switch dependency from devel/py-lxml5 to devel/py-lxml

Currently, there are two versions of python XML processing library
which conflict each other in the ports tree, namely:
- devel/py-lxml5 (now at version 5.4.0)
- devel/py-lxml  (now at version 6.0.1)

To avoid the situation that some ports depend on py-lxml5 and some
others do on py-lxml (by switching dependencies individually), this
commit switches the dependencies from py-lxml5 to py-lxml at once.

Additional note: There are still two ports (textproc/py-rdflib and
www/py-draftjs-exporter) depending on py-lxml5 since they limit upper
version to less than 6.

PR:		289491
Approved by:	Michiel van Baak Jansen <michiel@vanbaak.eu>, arrowd,
		crees, madpilot, delphij, marcus, nivit, kai,
		skreuzer, fluffy, bofh, thierry, stephen, sunpoet,
		0mp, Eric Camachat <eric@camachat.org>

*/*: update dependency on devel/py-lxml to devel/py-lxml5 (2nd attempt)

This is a follow up to the commit 230fb2661c78, which updated some
ports' dependencies on devel/py-lxml to devel/py-lxml5. It was an
attempt to follow the dependency change of
www/py-beautifulsoup. However, the switch was incomplete and broke
some other ports.

It has turned out that the ports depending on devel/py-lxml (at
version 4.9.3) does not limit their dependencies' upper bound to 4.x
except for one (devel/py-pymaven-patch). So updating them to
devel/py-lxml5 (at version 5.4.0) should cause no harm.

This commit switch dependencies of all the ports (except
devel/py-pymaven-patch) to devel/py-lxml5 avoid potential conflicts.

Co-authored-by: Daniel Engberg <diizzy@FreeBSD.org>

PR:		287144, 288047
Reported by:	makc (via ports-committers),
		vvd (PR 288047),
		diizzy (PR 287144)
Approved by:	portmgr (chase dependency change, unbreak build)
Fixes:		230fb2661c78 (*/*: update dependency on devel/py-lxml to devel/py-lxml5)

gnome.mk: rename gdkpixbuf2 to gdkpixbuf to prepare for port move

The GTK 1-based gdk-pixbuf has not existed for some time.

No functional or package changes.

*/*: Bump consumers of x11-toolkits/gtk30

New version of gtk3 in tree

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
* xml: Add some missing DeviceEventController methods.
* Bind the AT-SPI bus to the graphical session.
* Mark bus service as belonging to the session slice.
* Add ATSPI_ROLE_PUSH_BUTTON_MENU.
* Add an "announcement" event/signal to allow objects to send
  notifications (!63).
* Various code clean-ups and test improvements.

What's new in at-spi2-core 2.45.1:
* Atk and at-spi2-atk are now merged into this project.
* Now requires meson 0.56.2 and glib 2.67.4.
* at-spi2-atk: Expose the accessible hierarchy via dbus introspection.
* Properly escape the AT-SPI bus address; fixes warnings about the address
  not containing a colon (!55).
* Add a text value to AtspiValue, so that a value can expose a textual
  description, as in the new Atk value API.
* Add atspi_event_listener_register_with_app, to allow an event listener
  to be registered only for a given application (!52).

- accessibility/atk and accessibility/at-spi2-atk have been merged into
  accessibility/at-spi2-core

- accessibility/at-spi2-core: bump consumers of removed ports atk and at-spi2-atk

PR:		269704
Exp-run by:	antoine
---

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

framework: switch tree to using vala.mk

PR:		249940

sysutils/bamf: update to 0.5.6

PR:	264203
Reported by:	duchateau.olivier@gmail.com (maintainer)

Remove # $FreeBSD$ from Makefiles.

sysutils/bamf: fix build on GCC architectures

Use newer GCC:
cc1: error: unrecognized command line option "-Warray-bounds"

MFH:		2020Q3 (fix build blanket)

Update to 0.5.4

Pass maintainership to submitter

PR:		243490
Submitted by:	Olivier Duchateau <duchateau.olivier@gmail.com>

Add USES=xorg USES=gl, ports categories s

Add USES=xorg and USES=gl to ports in categories starting with 's'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

The updated libgtop included in the GNOME 3.28 update broke runtime for mate ports that use libgtop [1]. Bump all users not included in the GNOME update to fix these issues.

Reported by:	Barbara Guida <barbara.freebsd@gmail.com> [1]

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

Convert Python ports to FLAVORS.

Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

Take in olivierd@'s commit bit on his request.

Submitted by:	olivierd@
With hat:	portmgr-secretary

- Update to 0.5.3 - Sort USES - Re-generate patches, using 'make makepatch' - Add new patches, in order to remove all references to systemd

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 0.5.1 - Remove unneeded patch

Cleanup plist

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2. Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have
ported a few that can't be installed via this way.
The old gnome-utils and gnome-games ports where split up into single ports
and where converted to meta-ports.
gnome-terminal requires a UTF-8 locale to run, gdm handles this already, but
if you use startx you need to do this yourself.

Upgrade instructions:

Delete the old and conflicting packages:
# pkg delete clutter gnome-utils gnome-panel gnome-keyring vala-vapigen \
    guile gcalctool gnome-media libgnomekbd
# pkg delete gnome-screensaver gnome-applets bug-buddy evolution-exchange \
    evolution-webcal gnome-system-tools seahorse-plugins gnome-control-center

For package users the following lines will be enough:
# pkg upgrade
# pkg install gnome3

For ports users should do the following:
# portmaster -a
# portmaster x11/gnome3

We are currently aware of two issues. The first issue is a bug in the
file monitoring code in the glib20 port. This bug causes glib programs
to crash when files in a monitored directory are added or removed.
Upstream is aware of the problem, but since the problem is quite complex
there is no solution yet. This problem isn't restricted to BSD.

The second issue is that on certain video cards totem will display a
purple/pink overlay on the video. It not clear yet where the issues
comes from.

Major thanks goes to Gustau Perez for being a driving force behind getting
GNOME 3 up to speed again. Also thanks to Antoine Brodin for running the exp-runs.

This update was also made possible by:
	Joe Maloney
	Kris Moore
	Beeblebrox
	Ryan Lortie
	Antoine Jacoutot
	and everyone I missed

- Convert ports of sysutils/ to new USES=python

Approved by:	portmgr (implicit)

- Update to 0.5.0

BAMF, is a simple DBus daemon and C wrapper library of applications matching framework.

WWW: https://launchpad.net/bamf