accessibility/at-spi2-core2.60.4

accessibility/at-spi2-core: update to 2.60.4

PR:		295574

accessibility/at-spi2-core: update to 2.60.3

PR:		294998

accessibility/at-spi2-core: Update to 2.60.1

Reported by:	portscout!

accessibility/at-spi2-core: update to 2.56.8

PR:		293805

accessibility/at-spi2-core: update to 2.56.7

PR:		291899

accessibility/at-spi2-core: Fix make test with USES=dbus-testing

accessibility/at-spi2-core: update to 2.56.6

PR:		290512

accessibility/at-spi2-core: Run-depend on gsettings-desktop-schemas

This dep is required by the at-spi-bus-launcher program installed by
this package.

Not bumping PORTREVISION as I'm going to update the port in quick succession.

accessibility/at-spi2-core: update to 2.56.4

PR:		288753

accessibility/at-spi2-core: update to 2.56.3

PR:		288211

accessibility/at-spi2-core: Update to 2.56.2

Reported by:	portscout!

accessibility/at-spi2-core: Update to 2.56.1

PR:		286698

*: Bump revisions after dbus update

PR:		285253
Reported by:	Martin Birgmeier <d8zNeCFG@aon.at>

accessibility/at-spi2-core: Update to 2.54.1

Reported by:	portscout!
Sponsored by:	Future Crew, LLC

accessibility/at-spi2-core: update to 2.54.0

Changelog: https://gitlab.gnome.org/GNOME/at-spi2-core/-/blob/main/NEWS?ref_type=heads

Port changes:
    * reorder Makefile to make portlint & portclipy happy
    * apply portfmt changes

accessibility/at-spi2-core: update to 2.52.0

Changes:	https://gitlab.gnome.org/GNOME/at-spi2-core/-/blob/AT_SPI2_CORE_2_52_0/NEWS
Reported by:	Repology
PR:		278421
Exp-run by:	antoine

accessibility/at-spi2-core: update to 2.50.2

Changes:	https://gitlab.gnome.org/GNOME/at-spi2-core/-/blob/AT_SPI2_CORE_2_50_2/NEWS
Reported by:	Repology

accessibility/at-spi2-core: Mark TESTING_UNSAFE

accessibility/at-spi2-core: update to 2.50.1

accessibility/at-spi2-core: update to 2.50.0

Changes:	https://gitlab.gnome.org/GNOME/at-spi2-core/-/blob/AT_SPI2_CORE_2_50_0/NEWS
Reported by:	Repology
PR:		274083
Exp-run by:	antoine

accessibility/at-spi2-core: unbreak build with glib/MANPAGES=off

meson.build:147:13: ERROR: Dependency "libxml-2.0" not found, tried pkgconfig

libxml2 is only used by tests which cannot be disabled. devel/glib20 has it in
LIB_DEPENDS due to USE_GNOME=libxslt:build -> libxslt_USE_GNOME_IMPL=libxml2
without specifying :build suffix.

PR:		274045
Reported by:	Anton Saietskii
Submitted by:	Olivier Duchateau (based on)

accessibility/at-spi2-core: update to 2.48.4

- Adjust LICENSE to "or (at your option) any later version" clause
- Replace systemd hack with a patch that can be upstreamed

PR:		273738

accessibility/at-spi2-core: drop unused dependency after 951c1f5d1c73

====> Running Q/A tests (stage-qa)
Warning: you might not need LIB_DEPENDS on libxkbcommon.so

https://gitlab.gnome.org/GNOME/at-spi2-core/-/commit/57ae8d6e0e51

accessibility/at-spi2-core: drop unused X11 deps after 951c1f5d1c73

Disabling X11 only affects the following libraries. -Wl,--as-needed
removes the rest via https://github.com/mesonbuild/meson/commit/58ca96994f5a

$ poudriere testport -j 131amd64 -z nox11 accessibility/at-spi2-core
[...]
 =>> Checking shared library dependencies
- 0x0000000000000001 NEEDED               Shared library: [libX11.so.6]
- 0x0000000000000001 NEEDED               Shared library: [libXi.so.6]
- 0x0000000000000001 NEEDED               Shared library: [libXtst.so.6]
[...]

accessibility/at-spi2-core: make X11 optional

Already supported by gtk3 and gtk4 which started to directly depend on
at-spi2-core since fa81a4f5f8ed.

accessibility/at-spi2-core: update to 2.48.0

What's new in at-spi2-core 2.48.0:

* Add a "atk-only" build option. This allows atk to be built without libdbus
  installed, but it does not build libatspi or the atk bridge.
* Fix some typos in the documentation.

The atk-only support was added upstraem by Corey Halpin

Reported by:	Dmitry Pryakhin <graahnul.grom@ya.ru>
PR:		269996
Exp-run by:	antoine

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
* xml: Add some missing DeviceEventController methods.
* Bind the AT-SPI bus to the graphical session.
* Mark bus service as belonging to the session slice.
* Add ATSPI_ROLE_PUSH_BUTTON_MENU.
* Add an "announcement" event/signal to allow objects to send
  notifications (!63).
* Various code clean-ups and test improvements.

What's new in at-spi2-core 2.45.1:
* Atk and at-spi2-atk are now merged into this project.
* Now requires meson 0.56.2 and glib 2.67.4.
* at-spi2-atk: Expose the accessible hierarchy via dbus introspection.
* Properly escape the AT-SPI bus address; fixes warnings about the address
  not containing a colon (!55).
* Add a text value to AtspiValue, so that a value can expose a textual
  description, as in the new Atk value API.
* Add atspi_event_listener_register_with_app, to allow an event listener
  to be registered only for a given application (!52).

- accessibility/atk and accessibility/at-spi2-atk have been merged into
  accessibility/at-spi2-core

- accessibility/at-spi2-core: bump consumers of removed ports atk and at-spi2-atk

PR:		269704
Exp-run by:	antoine
---

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

accessibility/at-spi2-core: update to 2.44.1

accessibility: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  David K. Gerry
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>

With hat:	portmgr

accessibility/at-spi2*: Update WWW

The WWW links to LinuxFoundation.org were hopelessly bitrotten,
point to the GNOME GitLab instead which is still wrong-ish,
but the links and documentation might be updated there.
Reported (and fixed already) upstream as well.

PR:		251536
Reported by:	Edward Sanford Sutton III

Remove # $FreeBSD$ from Makefiles.

Move some gnome@ ports to desktop@

As gnome@ is lacking active committers at the moment, transfer some of its
ports [1] up the stack to the desktop@ group, in hope that this way we get some
updates in as the set of people that "should feel responsible" grows.

As soon as gnome@ grows some committers again, this can (and should) of course
be reverted again.

[1] The list of ports chosen in this move consits of all the ports that are
required to build x11/kde5.

Approved by:	portmgr (bapt)
Differential Revision:	https://reviews.freebsd.org/D26362

Update to 2.36.0

Going from 2.28.0 to 2.36.0 there is an ABI breakage:
the 'atspi_text_notify_reading_position' symbol has been removed.
I couldn't find any software in the ports tree that is using it

Catchup with recent developers warnings

devel/meson: Update to 0.50.0

- Add build fixes for at-spi2-core and totem

Changes:	https://mesonbuild.com/Release-notes-for-0-50-0.html
PR:		237138
Submitted by:	tobik
Approved by:	portmgr (antoine)
Exp-run by:	antoine

The FreeBSD GNOME team proudly presents GNOME 3.28 for FreeBSD.

The offical GNOME 3.28 release notes can be found at
https://help.gnome.org/misc/release-notes/3.28/

Thanks to Antoine Brodin for running the exp-runs.

PR:		229761

Update to 2.24.0

Move the default config file to share/default like upstream expects,
the one in sysconfdir will be still looked at

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Update at-spi2-core to 2.18.3.

The FreeBSD GNOME team proudly presents GNOME 3.18 for FreeBSD.

The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/

This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.

GDM is still at version 3.16 due to some issues.

Bump mate-themes to use the gtk 3.18 version of the themes.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:	207006

The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.

The offical GNOME 3.16 release notes can be found at https://help.gnome.org/misc/release-notes/3.16/

Upgrade instructions for port users:

Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:		201980

Update GNOME to 3.14.2.

This update was brought to you in collaboration with Gustua Perez

Make sure gtk30 pulls it the default theme (adwaita-icon-theme).
Update the extra gnome-shell-extensions so they work with gnome-shell 3.14.
Drop metacity from gnome3 meta-port.
Remove the gtile gnome-shell extension since it proven to be buggy.

Exp-run done by antoine@ for gdk-pixbuf2 deprecated API.

PR:		195414
Obtained from:	gnome dev repo

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2. Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have
ported a few that can't be installed via this way.
The old gnome-utils and gnome-games ports where split up into single ports
and where converted to meta-ports.
gnome-terminal requires a UTF-8 locale to run, gdm handles this already, but
if you use startx you need to do this yourself.

Upgrade instructions:

Delete the old and conflicting packages:
# pkg delete clutter gnome-utils gnome-panel gnome-keyring vala-vapigen \
    guile gcalctool gnome-media libgnomekbd
# pkg delete gnome-screensaver gnome-applets bug-buddy evolution-exchange \
    evolution-webcal gnome-system-tools seahorse-plugins gnome-control-center

For package users the following lines will be enough:
# pkg upgrade
# pkg install gnome3

For ports users should do the following:
# portmaster -a
# portmaster x11/gnome3

We are currently aware of two issues. The first issue is a bug in the
file monitoring code in the glib20 port. This bug causes glib programs
to crash when files in a monitored directory are added or removed.
Upstream is aware of the problem, but since the problem is quite complex
there is no solution yet. This problem isn't restricted to BSD.

The second issue is that on certain video cards totem will display a
purple/pink overlay on the video. It not clear yet where the issues
comes from.

Major thanks goes to Gustau Perez for being a driving force behind getting
GNOME 3 up to speed again. Also thanks to Antoine Brodin for running the exp-runs.

This update was also made possible by:
	Joe Maloney
	Kris Moore
	Beeblebrox
	Ryan Lortie
	Antoine Jacoutot
	and everyone I missed

- Set CPPFLAGS and LIBS in a number of ports so configure can find libintl.h   and libintl.so.  This fixes a problem where DATADIRNAME gets an incorrect   value which causes locale files to be installed in the wrong place. - The only configure checks that still need to be patched are related   to intltool so move DATADIRNAME patching from USES=pathfix to   USE_GNOME=intlhack.

- games/klavaro: remove excessive dependencies
- japanese/libskk: add INSTALL_TARGET=install-strip
- math/libqalculate: add INSTALL_TARGET=install-strip and remove pthread
  patching
- multimedia/freetuxtv: remove excessive dependencies
- science/gramps: fix shared-mime-info use

Exp-run by:	antoine
Approved by:	portmgr (antoine)

Add USES=libtool and INSTALL_TARGET=install-strip

Obtained from:	gnome-dev

- Convert use_xz,bzip to USES

Approved by:	portmgr

Stage all gnome@ ports in accessibility, which finishes this category!

In preparation for making libtool generate libraries with a sane name, fix all LIB_DEPENDS in accessibility

With hat:	portmgr