textproc/p5-XML-Parser2.47

textproc/p5-XML-Parser: Update to 2.47

- Update LICENSE
- Add LICENSE_FILE

Changes:	https://metacpan.org/dist/XML-Parser/changes

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

textproc/p5-XML-Parser: Convert XMLPARSER_EUCJP and XMLPARSER_SJIS to option framework

textproc/p5-XML-Parser: Update to 2.46

- Silence patch message
- Strip shared library
- Use MAKE_CMD instead of MAKE
- Sort PLIST
- Add comment about maintainer section
- Merge extract-encodings: into build-encodings:
- Fix build-encodings:

Changes:	https://metacpan.org/dist/XML-Parser/changes

*: re-assign kuriyama@s ports to the pool, commit bit safekept

With hat:	portmgr-secretary

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Cleanup no longer needed CHMOD usage after r424898.

PR:		213743
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

- Upgrade to 2.44.

Remove $FreeBSD$ from patches files everywhere.

With hat:	portmgr
Sponsored by:	Absolight

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Remove all the bootstrap files (.bs) from the plists.

Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight

- add stage support

Approved by:	portmgr (blanket infrastructure)

Use new format for LIB_DEPENDS.

Add NO_STAGE all over the place in preparation for the staging support (cat: textproc)

- convert to the new perl5 framework - trim Makefile header

Approved by:	portmgr (bapt@, blanket)

- Try to fix build on NFS without lockd (patch provided by Martin   Tournoij <martin@arp242.net> at ports/155991). - Add pre-build check for locking to tell people why build fails.

PR:		ports/155991, ports/164600
Submitted by:	"Dmitry S. Luhtionov" <mitya@cabletv.dp.ua>

- Upgrade to 2.41.

PR:		ports/158278
Submitted by:	pgollucci

-remove MD5

- Upgrade to 2.40.

- Add more encodings generated from p5-XML-Encoding source.

PR:		ports/136866 (requested)
Requested by:	Alfred Bartsch <bartsch@dssgmbh.de>

- Upgrade to 2.36.

PR:		ports/118994
Submitted by:	ijliao

Chase shlib bump of libexpat.

SHA256ify

Approved by: krion@

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

search.cpan.org redirect reduction canonicalization project, pass 1: URLs automatically rewritten from /search?dist=Foo or /dist/Foo to /dist/Foo/ (note trailing slash).  After a 2002(!) reorganization, this is the preferred way to refer to modules on search.cpan.org.

This pass brought to you by http://people.freebsd.org/~fenner/fix-search

- Fix plist when $XMLPARSER_SJIS is supplied. - Use ${PERL}.

Reported by:	nork

Don't remove a directory we didn't install

SIZEify.

Submitted by:	trevor

o Bump $LIB_DEPENDS line to chase expat's shlib version. o Bump $PORTREVISION.

Remove duplicate entry.

PR:		ports/64067
Submitted by:	michael johnosn <ahze@ahze.net>

Upgrade to 2.34. Optimize plist.

Submitted by:	foxfair@

de-pkg-comment.

CC, CXX, CFLAGS, PTHREAD_CFLAGS and PTHREAD_LIBS may contain `/' in them when using a non-default compiler/linker, so do not use `/' as delimiter for s///. (I picked `|' instead)

Bump PORTREVISION and expat shlib.

Upgrade to 2.31.

Bump portrevision (textproc/expat2 shlib bump).

Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command; the ECHO macro is set to "echo" by default, but it is set to "true" if make(1) is invoked with the -s option while ECHO_CMD is always set to the echo command.

Add knobs to enable "euc-jp" and "shift_jis" encodings.

Encoding mappings between euc-jp and Shift_JIS and other encoding (such
as Unicode) is not determined as exactly one to one.

This knobs are off by default because author of encoding mappings thought
that any of mappings should not be used by default until final mapping
will be determined (by foo organization?).

Define $XMLPARSER_EUCJP and/or $XMLPARSER_SJIS in /etc/make.conf to
x-euc-jp-(jisx0221|unicode) and/or x-sjis(cp932|jdk117|jisx0221|unicode)
to use these encodings in XML files by p5-XML-Parser (and it's dependents).

More style fixes for ports/textproc.

Use $PERL_CONFIGURE.

Fix LIB_DEPENDS. (expat.0 -> expat.2)

Upgrade to 2.30 (which depends on expat2).

Submitted by:	Naoki IDO <ido@hitachi-ms.co.jp>

Upgrade to 2.29.

Submitted by:	ido@hitachi-ms.co.jp
PR:		ports/19795

Lots and lots of cleanups.  Teach p5-* in general about PKGNAMEPREFIX. Add some missing/wrong dependencies.  Show how to respect CC/CFLAGS.  Many miscellaneous modifications.  I used more excessive hacks to force p5-Jcode and p5-WWW-Search to respect CC/CFLAGS.

Patches largely done by:	Christian Weisgerber <naddy@mips.inka.de>