www/p5-Dancer1.3522

www/p5-Dancer: Update to 1.3522

Changes:	https://metacpan.org/dist/Dancer/changes

www/p5-Dancer: Update to 1.3520

Add missing TEST_DEPENDS

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

www/p5-Dancer: Fix *_DEPENDS

- Add PORTSCOUT
- Convert to options dependency helper
- Fix indent
- Bump PORTREVISION for dependency change

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
cannot conflict with itself (due to logic in bsd.port.mk that
supresses the pattern match result in that case).

A few ports that set the conflicts variables depending on complex
conditions (e.g. port options), have been left unmodified, despite
probably containing outdated package names.

These changes should only affect the installation of locally built
ports, not the package building with poudriere. They should give an
early indication of the install conflict in cases where currently
the pkg command aborts an installation when it detects that an
existing file would be overwritten,

Approved by:	portmgr (implicit)

*: re-assign kuriyama@s ports to the pool, commit bit safekept

With hat:	portmgr-secretary

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update to 1.3513

PR:		251281
Submitted by:	dave.raynor@gmail.com
Approved by:	maintainer (via private email)

- Update to 1.3512

PR:		236650
Submitted by:	wenheping2000@hotmail.com(myself)
Approved by:	maintainer(timeout, > 3 months)

- Update to 1.3500 Changes: https://metacpan.org/changes/distribution/Dancer

PR:		232213
Submitted by:	wenheping2000@hotmail.com
Approved by:	maintainer(timeout, > 50 days)

- Update to 1.3400 Changes: https://metacpan.org/changes/distribution/Dancer

PR:		229755
Submitted by:	wen@(myself)
Approved by:	maintainer(timeout, >= 14 days)

Remove all := from BUILD_DEPENDS, here are never needed.

While there, cleanup, and sort depends.

When build and run dependencies are the same, there are three ways to
avoid duplicating the list while not adding the framework added
BUILD_DEPENDS to the RUN_DEPENDS.  In order of preference, they are:

1) use RUN_DEPENDS to set BUILD_DEPENDS:

BUILD_DEPENDS=	${RUN_DEPENDS}
RUN_DEPENDS=	foo:bar/baz

2) create another variable and use it:

MY_DEPENDS= foo:bar/baz
BUILD_DEPENDS=	${MY_DEPENDS}
RUN_DEPENDS=	${MY_DEPENDS}

3) use BUILD_DEPENDS to set RUN_DEPENDS and force evaluation:

BUILD_DEPENDS=	foo:bar/baz
RUN_DEPENDS:=	${BUILD_DEPENDS}

Sponsored by:	Absolight

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

www/p5-Dancer: remove RUN_DEPENDS on devel/p5-Devel-Hide

PR:		209262
Submitted by:	adamw
Pointy hat to:	pi

www/p5-Dancer: 1.3138 -> 1.3202

Changes:
  http://cpansearch.perl.org/src/BIGPRESH/Dancer-1.3202/Changes

PR:		209262
Submitted by:	Henk van Oers <hvo.pm@xs4all.nl>
Approved by:	kuriyama (maintainer timeout)

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

- Upgrade to 1.3138 (including some security issues).

PR:		ports/157869
Submitted by:	Henk van Oers <hvo.pm@xs4all.nl>
References:	http://lists.preshweb.co.uk/pipermail/dancer-users/2015-June/004621.html

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

- Upgrade to 1.3132.

- Upgrade to 1.3120.

- add missed runtime dep on Module::Runtime

With hat:	perl@

- no need in MAN1 after stagify

Approved by:	maintainer (no response to email)

- Upgrade to 1.3119.

Add NO_STAGE all over the place in preparation for the staging support (cat: www)

- Upgrade to 1.3117.

- Update to 1.3115 - Convert to new 'created by' header

PR:		ports/179464
Submitted by:	Andy Walker <awalker@sourcefire.com>
Approved by:	maintainer timeout (2+ weeks)

- Upgrade to 1.3110.

Feature safe: yes

- Upgrade to 1.3100.

- Upgrade to 1.3099.

- Fix missing default option in prev commit.

- Upgrade to 1.3097.

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or   RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned   about for a while.

PR:		ports/168208
Approved by:	portmgr (miwi)

- Upgrade to 1.3095.

- Upgrade to 1.3093.

Feature safe:	yes

- Upgrade to 1.3091.

- Upgrade to 1.3080.

Feature safe:	yes

- Upgrade to 1.3072.

- Upgrade to 1.3071.

- Upgrade to 1.3060.

- Upgrade to 1.3040.

- Upgrade to 1.3030.

- Upgrade to 1.3020.

- Upgrade to 1.3011 [1]. - Add $LICENSE [2].

PR:		ports/154379 [1], ports/153321 [2]
Submitted by:	Steve Wills <steve@mouf.net> [1],
	  	Grzegorz Blach <magik@roorback.net> [2]

- Upgrade to 1.2003.

- Upgrade 1.2000.

Related to:	ports/152371

OPTIONS+=   YAML

PR:             ports/149991
Submitted by:   David Demelier <markand@malikania.fr>
Approved by:    maintainer timeout (kuriyama ; 45 days)