x11-toolkits/qt5-quickcontrols5.15.19p0

Qt5: Update to 5.15.19

This is the final release of Qt5. If your port still uses Qt5 and could
possibly use Qt6 instead, now would be a good time to make the switch.

PySide2: Update to 5.15.19

Announcement:
https://lists.qt-project.org/pipermail/announce/2026-May/000626.html
Release notes:
https://code.qt.io/cgit/qt/qtreleasenotes.git/tree/qt/5.15.19/release-note.md

Qt5: Update to 5.15.18

This is the penultimate release of Qt5. While Qt5 is EOL, due to the
LGPL releases being a year behind the commercial releases, there will
still be one more patch release in May 2026.

PySide2: Update to 5.15.18

Announcement:
https://lists.qt-project.org/pipermail/announce/2025-October/000592.html
Release notes:
https://code.qt.io/cgit/qt/qtreleasenotes.git/tree/qt/5.15.18/release-note.md

MFH:		2025Q4

Qt5: Update to 5.15.17 (getting down to the end)

Upstream standard support for Qt5 is officially over. [1] In short,
that means get your ports off of Qt5 ASAP, especially end-user
applications. FreeBSD deprecation of Qt5 is coming soon! It will likely
be a year of lead time, but please help in the meantime and remove qt5
flavors and child ports whenever possible.

www/qt5-webengine has been updated to 5.15.19 with security patches up to
Chromium 135.0.7049.95. It's unclear at this point if further security
patches will be publically available. The Qt5 WebEngine component,
however, is and forever will be based on Chromium 87.0.4280.144, which
is over 4 years old. Props to upstream for their backports over all
these years and making them publically available (probably more to do
with licensing constraints than anything, but hey).

We otherwise depend on KDE as our direct upstream to roll our distfiles,
which we have been hosting locally for over 3 years. Since Qt upstream
drops the LGPL releases of Qt 5.15.x a year later, there's no guarantee
KDE will rebase their patchset over the next year for the remaining two
.18 and .19 releases. This might be the last update for Qt5 on FreeBSD.

[1] https://www.qt.io/blog/qt-5.15-extended-support-for-subscription-license-holders

Qt5: Update to 5.15.16

Update devel/pyside2* and devel/shiboken2 to 5.15.16

Update www/qt5-webengine to include the latest security fixes in
the chromium submodule [1]

Release note:
https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.16/release-note.md

MFH:		2024Q4
Security:	16e472d5-a8aa-11ef-b680-4ccc6adda413 [1]

Qt5: Update to 5.15.15

Update devel/pyside2* and devel/shiboken2 to 5.15.15

Update www/qt5-webengine to include the latest security fixes in
the chromium submodule

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.15/release-note.md

MFH:		2024Q3
Security:	66907dab-6bb2-11ef-b813-4ccc6adda413

Qt5: Update to 5.15.14

Update devel/pyside2* and devel/shiboken to 5.15.14

Update devel/qt5-script* and www/qt5-webengine to 5.15.17

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.14/release-note.md

Qt5: Update to 5.15.13

Update devel/pyside2* and devel/shiboken to 5.15.13

Update www/qt5-webengine to latest commit. Python 3.x support has been
integrated upstream, so local patches have been removed.

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.13/release-note.md

Qt5: Update to 5.15.12

Update devel/pyside2* and devel/shiboken2 to 5.15.12

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.12/release-note.md

Qt5: Update to 5.15.11

Update devel/pyside2* and devel/shiboken2 to 5.15.11

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.11/release-note.md

Qt5: Update to 5.15.10

Update devel/qt5-script* and www/qt5-webengine to 5.15.15-lts
Update devel/pyside2* and devel/shiboken2 to 5.15.10

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.10/release-note.md

PR:		273934
Exp-run by:	antoine

Qt: Update Qt 5 to 5.15.8

- update distfiles to be rebased on the Qt 5.15.8 branch

PR:		268773
Exp-run by:	antoine

Qt5: Update Qt 5 to 5.15.7

* rebase the KDE patched Qt5 ontop of the 5.15.7 branch
* update qt5-script to 5.15.11

Exp-run by:	antoine
PR:		268533

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

qt5: Update Qt to 5.15.5 (KDE patched)

- update patch-collection diff to be at the highest patch-level
- update patch-collection diff to be against 5.15.5 instead of 5.15.2
- update devel/qt5-script to 5.15.10
- libressl support by Felix Palmen <felix@palmen-it.de>

PR:			264944
Exp-run by:		antoine
Differential Revision:	https://reviews.freebsd.org/D35619

Qt: Switch Qt5 to use KDE's Qt patch collection

From [1]
    What's this?

	This is a set of git repositories based on the last public
	commits available for Qt 5.15 branches with a curated collection
	of patches on top to ensure open source products can be used
	comfortably until users transition to their Qt 6-based ports.

    Which patches does it include?

	This collection of patches includes patches that fix at least
	one of the following:

	    * Security issues
	    * Crashes
	    * Functional defects

	We only include patches that have been approved upstream in the
	Qt project. If a patch cannot be merged upstream for technical
	reasons (e.g. the class no longer exists), it can also be
	merged.

	The patches to merge will be decided based on their relevance
	towards Open Source products and their viability.

PR:		260548
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D33446

[1] https://community.kde.org/Qt5PatchCollection

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Only define USE_LDCONFIG in devel/qt5-core

All the qt5-ports share the same library directory. devel/qt5-core is dependet on
by all others.
So there is no need to add identical entries to libdata/ldconfig, and restart the
ldconfig service on every pkg change of those ports.

Reported by:	bapt
Reviewed by:	bapt
Differential Revision:	https://reviews.freebsd.org/D27224

Update WWW

Approved by:	portmgr (blanket)

Update Qt5 to 5.13.2

Announcement:
        https://www.qt.io/blog/qt-5.13.2-released

Thanks to kai@ for updating webengine.

PR:		241649
Exp-run by:	antoine

Qt5 update to 5.13.0

For new features, check: https://wiki.qt.io/New_Features_in_Qt_5.13

Thanks to adridg who helped to fix a lot of packages.

Exp-run by:	antoine
PR:		238782

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Update Qt5 to 5.12.2

- Thanks to kai for updating webengine.

Exp-run by:	antoine
PR:		236895

x11-toolkits/qt5-quickcontrols: fix regression in 5.12.1

https://bugreports.qt.io/browse/QTBUG-73691

Update Qt5 to 5.12.1

Release announcement:
  https://blog.qt.io/blog/2019/02/01/qt-5-12-1-released/
Changelog:
  https://wiki.qt.io/Qt_5.12.1_Change_Files

- A change was required to qt-dist.mk to always pass LOCALBASE to qmake,
  as Qt5 has been installed to a prefix for some time now, there should
  not be any harm in that, with respect to it picking up installed versions
  of itself during build.

PR:		235622
Exp-run by:	antoine

Fix Qt5 symbol version scripts to put the catch-all clause first.  When a symbol matches multiple clauses the last one takes precedence.  If the catch-all is last it captures everything.  In the case of Qt5 libraries this caused all symbols to have a Qt_5 label while some should have Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1] https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2] https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3] https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

Update Qt5 to 5.12.0

http://blog.qt.io/blog/2018/12/06/qt-5-12-lts-released/

- This breaks support for libressl again. Patches are welcome.

PR:		233705
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Merge lang/qt5-qml and x11-toolkits/qt5-quick into x11-toolkits/qt5-declarative

- There was no obvious reason to split these ports, and it makes
  porting simpler; the set of ports using either mostly coincided.

Exp-run by:	antoine
PR:		223687
PR:		232751

qt5: Fix build on GCC based architectures.

PR:		231584
PR:		231677
PR:		231685
PR:		231830
PR:		231955
PR:		231905
PR:		231892
PR:		231684
PR:		231958
PR:		231960
PR:		231818
PR:		231542
PR:		231860
PR:		231681
PR:		231963
PR:		231891
PR:		231966
PR:		231904
PR:		231676
PR:		231819
PR:		231956
PR:		231680
PR:		231957
PR:		231903
PR:		231901
PR:		231667
PR:		231861
Submitted by:	 Piotr Kubaj <pkubaj@anongoth.pl>

Actually I misread manu's email message.  These ports are still broken on, and only on, armv6.  Confirmed by local testing.

Submitted by:	manu
Approved by:	portmgr (tier-2 blanket)

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	→https://reviews.freebsd.org/D15540

Apparently fixed after r472713.

Reported by:	mikael.urankar
Approved by:	portmgr (tier-2 blanket)

Mark these ports as broken on aarch64, and, where appropriate, on armvX.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

Update the Qt5 ports to 5.10.1.

The work was done by tcberner and myself, with thanks to antoine for the
exp-run.

Not a lot to report compared to other Qt5 updates:
* net/qt5-network is still broken with LibreSSL. I said this in a commit
  message ages ago but it bears repeating: upstream is open to adding support
  for LibreSSL, but someone needs to step up to maintain it upstream, otherwise
  things will continue to be broken all the time.
* www/qt5-webengine is a huge monster that is terrible to update, just like
  www/chromium itself is. We (kde@) have decided to keep using the 5.9 series
  for the time being, as it should be compatible with the rest of Qt anyway. It
  was updated to 5.9.5, the latest 5.9 release at the time of writing.

PR:		228213

Fix permissions in installed Qt5 header files

For the qt5-* ports bsd.qt.mk sets EXTRACT_AFTER_ARGS, and
thereby does not get the normal default value of
      --no-same-owner --no-same-permissions
passed when extracting. This lead to for example header files
being installed (i.e. copied), with permissions group write
permissions.

Manually append that to the bsd.qt.mk shenanigans (also do the
same in www/qt5-webchannel, which opts out of the bsd.qt.mk value)

PR:		227027
Reported by:	grarpamp@gmail.com

Drop %%DEBUG%% from several plist entries.

Those items were added with %%DEBUG%% when we updated Qt to 5.3.2. At the time,
src/dialogs/dialogs.pro had the following excerpt:

    # In case of a debug build, deploy the QML files too
    CONFIG(debug, debug|release): QML_FILES += $$DIALOGS_QML_FILES

but that actually changed in Qt 5.9.0, which dropped the check altogether and
always adds those files to QML_FILES.

Not shipping them causes runtime issues according to the bug report below.

PR:		225347
Submitted by:	Tomasz Kowalczyk <kowalczt@zoho.eu>

Update Qt5 ports to 5.9.3.

This took quite a lot of time because Qt's own build system underwent
several changes in 5.8.0 that took a while to adapt to.

And, of course, qt5-webengine is a behemoth that we need to patch like crazy
due to its bundling of Chromium. In fact, most of the Chromium patches in
qt5-webengine have been imported with no changes from www/chromium@433510
("www/chromium: update to 56.0.2924.87").

New port: accessibility/qt5-speech

Bigger changes to Qt5 ports we had to make:
- Qt now allows using a configure.json file to define configuration options
  and specify configuration checks that can be done when qmake is invoked.
  However, configure.json checks done in a subdirectory only propagates to
  subdirectories, and checks elsewhere will fail if all .pro files are being
  parsed at once (i.e. qmake -recursive), so several ports had to switch to
  USES=qmake:norecursive along with manual additional qmake invocations in
  subdirectories in order to work. It's been mentioned in a few places such
  as Qt's bug tracker that qmake's recursive mode is pretty much deprecated,
  so we might switch to non-recursive mode by default in the future.

- Uses/qmake.mk: Introduce QMAKE_CONFIGURE_ARGS. qmake now accepts
  arbitrary options such as '-foo' and '-no-bar' at the end of the
  command-line. They can be specified in QMAKE_CONFIGURE_ARGS.

- graphics/qt5-wayland: The port can only be built if graphics/mesa-libs is
  built with the WAYLAND option, so a corresponding option (off by default)
  was added to the port.

- misc/qt5-doc: Switch to a pre-built documentation tarball. The existing
  port was not working with Qt 5.9. Instead of trying to fix it, switch to
  what Gentoo does and fetch a tarball that already contains all
  documentation so that we do not have to build anything at all. The
  tarball's name and location in download.qt.io look a bit weird, but it
  seems to work fine.

- www/qt5-webengine: Use binutils from ports, Chromium's GN build system
  generates a build.ninja that uses ar(1) with the @file syntax that is not
  supported by BSD ar, so we need to use GNU ar from binutils.

- x11-toolkits/qt5-declarative-render2d: This port was merged into the main
  Qt Declarative repository upstream, and into x11-toolkits/qt5-quick in the
  ports tree.

Changes to other ports we had to make:
- biology/ugene: Drop a '#define point "."' that is not present in more
  recent versions of the port. Defining a macro with such a common name
  causes build issues with Qt 5.9, which uses |point| as an argument name in
  methods.

- cad/qelectrotech: Fix plist with Qt 5.9. Directories are no longer
  installed with `cp -f -R', but rather `qmake install qinstall', which does
  not install

    %%DATADIR%%/elements/10_electric/20_manufacturers_articles/bosch_rexroth/.directory

  That's a local file that should not even have been part of the tarball
  anyway.

- chinese/gcin-qt5: Add additional private Qt directories (which should not
  be used in the first place) to get the port to build with Qt 5.9.

- devel/qtcreator: Fix plist with Qt 5.9. Something changed in qdoc and some
  test classes no longer generate documentation files.

- security/keepassx-devel: Import a patch sent upstream almost a year ago to
  fix the build with Qt 5.9.

Thanks to antoine for the exp-run, and tcberner and Laurent Cimon
<laurent@nuxi.ca> for landing changes in our qt-5.9 branch.

PR:		224849

Update Qt5 to 5.7.1, and unify the Qt4 and Qt5 ports some more

* Update Qt5 to 5.7.1
* Move Qt4 binaries to lib/qt4/bin
* Move Qt5 libraries to lib/qt5/lib
  By moving the libraries we should finally be able to get rid of the inplace
  upgrade bug (see ports bugs 194088, 195105 and 198720):  when Qt5's libraries
  were lying in /usr/local/lib, which would often get added by pkgconfig to the
  linker paths via dependencies, the already installed libraries were linked
  against, instead of the ones that were being built. This forced us to make
  sure, that -L${WRKSRC}/lib was always coming before -L/usr/local/lib in the
  linker flags. With this change this should no longer be the case.
* Rename some ports to match the rest (foo-qtX -> qtX-foo)
* Depend on new port misc/qtchooser [see UPDATING & CHANGES]

There are several new Qt5 ports which all have been created by Marie Loise Nolden
<nolden@kde.org>. Thanks again.

PR:		216797
Exp-Run by:	antoine
Reviewed by:	rakuco, mat, groot_kde.org
Approved by:	rakuco (mentor)
Differential Revision:	https://reviews.freebsd.org/D9213

Update the Qt5 ports to 5.6.1.

This took longer than expected, but there are quite a few changes to the
existing ports and a few new ones.

General upstream changes:
- Starting with Qt 5.6.2, Qt will fail at configuration time if LibreSSL is
  being used. According to the discussion here:
  https://codereview.qt-project.org/#/c/154800/
  The Qt project is not opposed to LibreSSL, but does not want to mix
  support for it into the OpenSSL backend code, especially as they move
  towards supporting OpenSSL 1.1.
  People interested in LibreSSL support are welcome to submit a separate
  backend upstream, but are expected to maintain it. We (kde@) are not
  opposed to carrying some patches authored by others in the future, as long
  as they are not huge and destabilizing.
- When Qt detects the compiler supports C++11, it will pass -std=gnu++11 by
  default (this is an upstream change). You can add "CONFIG -= c++11" to
  your .pro. Qt 5.7 will require C++11.
- www/webkit-qt5: The QtWebKit module is deprecated upstream, and is shipped
  separately as a community release tarball. kde@ does not have an ETA for a
  qt5-webengine port, as it requires a huge effort (and number of patches)
  similar to maintaining www/chromium itself.
- x11-toolkits/qt5-declarative has been deprecated upstream. The last
  release is 5.5.1.

Relevant changes:
- devel/qmake5: The freebsd-clang mkspec has become the default mkspec on
  FreeBSD, replacing the outdated freebsd-g++ one that was moved to
  unsupported/ (it still works though).
- devel/qt5-qdoc: qdoc was moved to qttools upstream, but its data files are
  still in qtbase. The data files are now in the qt5-qdoc-data port.
- misc/qt5-doc: Clean up and stop requiring a compiler and fumbling with
  mkspecs. Instead of running the `configure' script, which requires a
  compiler and adjustments to the mkspecs files and also ends up building a
  new qmake binary, we now leverage USES=qmake to generate all the Makefiles
  from the top-level qt.pro. Getting this to work requires some tricks,
  though, and qt.conf.in has a longer explanation of what's being done.
  Switch to USES=gmake to be able to drop MAKE_JOBS_UNSAFE=yes.

New ports:
- comms/qt5-serialbus
- devel/qt5-qdoc-data
- x11-toolkits/qt5-quickcontrols2

Big thanks to Adriaan de Groot (groot@kde.org), tcberner@ and Loise Nolden
(nolden@kde.org) for the huge amount of work they put into this
patch. Loise in particular also sent quite a few changes upstream that were
essential for this update to work.

PR:		211916

Update Qt5 to 5.5.1.

This is the latest stable release at time of writing.

Release announcement: http://blog.qt.io/blog/2015/07/01/qt-5-5-released/
New features in Qt 5.5: https://wiki.qt.io/New_Features_in_Qt_5.5

As usual, huge thanks to Tobias Berner (tcberner@gmail.com) for all his work
on these ports in kde@'s experimental area51 repository. He's the one who
started the update and did a lot of the initial work on Qt 5.5. Ralf Nolden
(nolden@kde.org) has contributed the initial version of most of our new Qt5
ports.

Also thanks to Yuri Victorovich (yuri@rawbw.com) for contributing PR 205805
with his own patch for the 5.5.1 update. Some of his changes there prompted
additional fixes and changes present in the final patch generated from our
experimental repository.

New ports:
- comms/qt5-connectivity, comms/qt5-sensors, devel/qt5-location,
  graphics/qt5-3d, net/qt5-enginio, x11-toolkits/qt5-canvas3d,
  x11-toolkits/qt5-uiplugin.

General changes in all Qt5 ports:
- All Qt5 ports are now built with -Wl,--as-needed to avoid overlinking,
  which is a problem with qmake-based because the libraries passed to the
  linker come from the modules .pri files and many are not necessary.
- With this change, several ports had their USE_QT5 lines adjusted to
  explicitly include some libraries that were pulled in implicitly, and to
  exclude libraries no longer required with -Wl,--as-needed.

Changes in specific ports:
- devel/qt5: Drop the SQL_PLUGINS and TOOLS options and depend on all Qt5
  ports by default. It makes the Makefile much simpler, and those options
  were already on by default.
- devel/qt5-core: The clang+base libstdc++ workaround has been expanded and
  more C++11 features have been disabled when that combination is used by a
  port (basically, FreeBSD 9 with USES=compiler:c++11-lang). The disabled
  features have explanations for why they were disabled in the patched
  header itself.
- devel/qt5-designer: uiplugins has been split out following a similar
  change upstream. By depending on qt5-uiplugin, qt5-uitools avoids having
  to depend on the big qt5-designer port.
- multimedia/qt5-multimedia: The port now uses GStreamer 1.0 instead of
  0.10.
- net/qt5-network: The port now depends on libproxy for proxy settings.
  Using libproxy allows proxy settings to be read from different sources,
  and also allows .pac files to work with Qt.
- www/qt5-webkit: The port now uses GStreamer 1.0 instead of 0.10.

PR:		205805
PR:		206435

Update Qt5 to 5.4.1.

This is probably the first time our Qt 5 ports are tracking the latest
upstream release :-)

There isn't much to report in this update, thanks to the effort spent in the
5.2->5.3 update: a lot of the work is just small plist and patch updates.
Thankfully, several patches have been upstreamed and are not needed on our
side anymore.

I would like to thank Alex Richardson <arichardson.kde@gmail.com> and Tobias
Berner <tcberner@gmail.com> for their help with the plist updates and
general testing.

PR:		198585

Update Qt5 ports to 5.3.2.

Proudly presented by the KDE on FreeBSD team, with several guest stars.

This update took way longer than initially expected due to us previously
accumulating assumptions and changes to Qt's build system that finally bit
us back with the 5.3 release series, so we had to do a fair amount of
cleanup.

New ports:
- comms/qt5-serialport: Qt functions to access serial ports, originally
                        based on work by Fernando Apesteguia. [1]
- devel/qt5-qdoc: Qt documentation generator, the Qt5 equivalent of
                  devel/qt4-qdoc3. Originally worked on by Tobias Berner.
                  It had already been half-split from devel/qt5-buildtools,
                  we just needed to finish the work.

Dead ports:
- devel/qt5-qmldevtools: Merged into lang/qt5-qml.

Minor changes:
- devel/qt5: Add x11/qt5-x11extras and the new ports to the dependency list.
- graphics/qt5-imageformats: The port now supports the JPEG2000, WEBP,
                             Direct Draw Surface and ICNS formats.
- multimedia/qt5-multimedia: The ALSA and PULSEAUDIO options are now
                             mutually exclusive due to changes introduced in
                             Qt 5.3.0 (the ALSA code is now a proper plugin
                             that is only built if PulseAudio is not used).
- x11/qt5-x11extras: Add USE_LDCONFIG since the port installs a shared
                     library.

The big changes:
- bsd.qt.mk: Set QMAKESPEC instead of QMAKEPATH. [3]
  QMAKEPATH does much more than we want now that we call qmake from the top
  of ${WRKSRC}. qmake uses QMAKEPATH when evaluating the QMAKE_MKSPECS
  property, which is in turn used by qt_config.pri to load the .pri files in
  mkspecs/modules.

  In practice, this means that if people have an older Qt installation those
  files will be used and QT_CONFIG will have values such as "gui" even if
  one is building a port like textproc/qt5-xml, which passes -no-gui to the
  configure script. Consequently, unintended code paths may be enabled or
  the configuration step can just fail if the .pro files expect values that
  are not present in the system-wide, older .pri files.

  We avoid all those problems if we use QMAKESPEC, as qmake does not take
  its value into account when evaluating the QMAKE_MKSPECS property and will
  only parse the files in the mkspec's directory (mkspecs/freebsd-clang, for
  example, instead of all the files in mkspecs).

- Stop explicitly passing ${LOCALBASE} to the compiler. [3]
  qmake's behavior has changed in Qt 5, and the paths set in QMAKE_INCDIR
  and QMAKE_LIBDIR in the mkspecs are passed before any others, such as the
  ones in the build directory themselves.

  In practice, this means that we end up with linker calls like this:

  c++ -o libfoo.so foo.o bar.o -L/usr/local/lib -L/wrkdir/build/lib
      -lQt5Gui -lQt5Core

  So if one already has Qt installed in the system, the older, already
  present version of the libraries in /usr/local/lib will be used instead of
  the newly-built ones in /wrkdir/build/lib.

  QTBUG-40825 discusses this behavior upstream, but there has been no
  agreement on a solution yet.

  For now, the solution adopted is to make the compiler and the linker aware
  of those paths but only try them last after all others, and this is
  achieved by setting the CPATH and LIBRARY_PATH environment variables when
  qmake is being used.

  In addition to setting them in CONFIGURE_ENV and MAKE_ENV, we also need to
  stop changing QMAKE_INCDIR and QMAKE_LIBDIR as well as filter those paths
  from the pkg-config calls qtbase's configure script makes.

- Call qmake from the root of the ${WRKSRC}.

  In Qt 5.3, Qt's build infrastructure has undergone some changes that make
  our previous approach of calling qmake from the directories we want to
  build stop working. Things would break even more in Qt 5.4, in which
  qtbase's configure script does not accept the -process, -fully-process and
  -dont-process arguments anymore (it always behaves as if -process had been
  used).

  Bite the bullet and start calling qmake from ${WRKSRC}. The largest part of
  this change involves changing lines in Makefiles from
    WRKSRC_SUBDIR=	foo/bar
  to
    BUILD_WRKSRC=		${WRKSRC}/foo/bar
    INSTALL_WRKSRC=		${WRKSRC}/foo/bar
  as well as adding patches to .pro files to avoid entering other
  subdirectories and removing post-configure targets that are not necessary
  anymore.

  Since qmake needs to be called from the top of ${WRKSRC} anyway, we can
  also simplify the configuration process for the qtbase ports a little.
  Looking at r10019 it is not clear why we started calling qmake in the
  pre-configure target in addition to the post-configure one (while also
  skipping it in do-configure), but we can now drop this call since letting
  configure behave as if -process had been passed means it will call qmake
  on its own and overwrite the files generated by the pre-configure call. We
  still need to call qmake in post-configure though, as the configure script
  does not pass -recursive when calling qmake and we need to be able to call
  make from any subdirectory when building.

PR:		194762 [1]
PR:		194566 # exp-run with base GCC and clang
PR:		194088 [3]

Remove @dirrm and @dirrmtry entries from the Qt ports.

Update the default version of GCC in the Ports Collection from GCC 4.7.4 to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Add x11-toolkits/qt5-quickcontrols.

The Qt Quick Controls module provides a set of controls that can be
used to build complete interfaces in Qt Quick.

Submitted by:	Tobias Berner <tcberner@gmail.com> via the kde-freebsd mailing list