x11/cool-retro-term1.1.1_3

MANPREFIX: eliminate the use of MANPREFIX for x11*

While here move some manpages to share/man

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

x11: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Weinberger <adam@vectors.cx>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexander Matey <matey@cis.ohio-state.edu>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Alexey Mikhailov <karma@ez.pereslavl.ru>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Toernqvist <antont@inbox.lv>
  *  Anton Tornqvist <antont@inbox.lv>
  *  Ashish Shukla <wahjava@gmail.com>
  *  Ben Woods <woodsb02@FreeBSD.org>
  *  Bert Burgemeister <trebbu@googlemail.com>
  *  Bruce A. Mah <bmah@ca.sandia.gov>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Chris Hutchinson <portmaster@BSDforge.com>
  *  Cy SChubert <cy@FreeBSD.org>
  *  Cy Schubert <Cy.Schubert@uumail.gov.bc.ca>
  *  Cy Schubert <cy@FreeBSD.org>
  *  DaJoob
  *  Daniel Roethlisberger <daniel@roe.ch>
  *  Daniel Walter <sahne@0x90.at>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Dave Grochowski
  *  David Mackay <davidjx8p@gmail.com>
  *  David Yeske <dyeske@gmail.com>
  *  Dejan Lesjak <lesi@FreeBSD.org>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Dennis Herrmann <dhn@FreeBSD.org>
  *  Dmitri Goutnik <dg@syrec.org>
  *  Dominik Rothert <dr@domix.de>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Eric Blood <eblood@cs.unr.edu>
  *  Eric L. Hernes <erich@rrnet.com>
  *  Eric Turgeon <ericbsd@FreeBSD.org>
  *  Eric Turgeon <ericturgeon.bsd@gmail.com>
  *  Evgeni Dimitrov <evgeni.dimitrov@gmail.com>
  *  FURUSAWA,Kazuhisa <kazu@jp.freebsd.org>
  *  Florent Thoumie <flz@xbsd.org>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  Francis Bacque <idroxid01@yahoo.fr>
  *  Franz Klammer <klammer@webonaut.com>
  *  Gerrit Beine <tux@pinguru.net>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Gustau Perez i Querol <gustau.perez@gmail.com>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hendrik Scholz <hendrik@scholz.net>
  *  Jacob House <jacob@jwfh.ca>
  *  James Earl <jdearl@telus.net>
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jeroen Schot <schot@a-eskwadraat.nl>
  *  Jim Mock <jim@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Julien Laffaye <kimelto@gmail.com>
  *  KIMURA Yasuhiro <yasu@utahime.org>
  *  Ka Ho Ng <khng300@gmail.com>
  *  Kelly Yancey <kbyanc@posi.net>
  *  Ken Moore <ken@pcbsd.org>
  *  Koop Mast <einekoai@chello.nl>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Lars Engels <lars.engels@0x20.net>
  *  Lin, Cheng-Tao <b89605222@ntu.edu.tw>
  *  MANTANI Nobutaka <nobutaka@nobutaka.com>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Ranne <gasp@ridcully.dnsalias.org>
  *  Martin Tournoij <carpetsmoker@xs4all.nl>
  *  Martin Wilke (miwi@FreeBSD.org)
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Matt Lancereau
  *  Matt Lancereau <matt@rimasec.net>
  *  Matt Peterson <matt@peterson.org>
  *  Matthew Donovan <kitchetech@gmail.com>
  *  Matthew Fuller <fullermd@futuresouth.com>
  *  Matthew Hunt <mph@pobox.com>
  *  Matthew West <mwest@uct.ac.za>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michiel Overtoom <motoom@xs4all.nl>
  *  Mikhail Teterin <mi@aldan.algebra.com>
  *  Morten Slot Kristensen
  *  Murray Stokely <murray@FreeBSD.org>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nikos Ntarmos <ntarmos@ceid.upatras.gr>
  *  Nikos Ntarmos <ntarmos@cs.uoi.gr>
  *  Oleg Pudeyev <oleg@bsdpower.com>
  *  Oliver Breuninger <ob@breuninger.org>
  *  Oliver Breuninger <ob@seicom.NET>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Olivier Duchateau
  *  Patrick Li <pat@databits.net>
  *  Pawel Worach <pawel.worach@gmail.com>
  *  Pedro Giffuni
  *  Per Otterstr=F6m <pelle@fukt.bth.se>
  *  Petr Holub <hopet@ics.muni.cz>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Roman Bogorodskiy <novel@FreeBSD.org>
  *  Sakai Hiroaki <sakai@miya.ee.kagu.sut.ac.jp>
  *  Sakai Hiroaki <sakai@seki.ee.kagu.sut.ac.jp>
  *  Samy Al Bahra <samy@kerneled.org>
  *  Samy Al Bahra <sbahra@kerneled.org>
  *  Sascha Holzleiter <sascha@root-login.org>
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Satoshi TAOKA
  *  Scott Mace <smace@FreeBSD.org>
  *  Sean Farley <sean-freebsd@farley.org>
  *  Sebastian Yepes <esn@x123.info>
  *  Serge Gagnon <gagnon__s@videotron.ca>
  *  Sergei Kolobov <sergei@kolobov.com>
  *  Sofian Brabez <sbz@FreeBSD.org>
  *  Stanislav Sedov <stas@FreeBSD.org>
  *  Stepan Zastupov [RedChrom] <redchrom@gmail.com>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Stijn Hoop <stijn@win.tue.nl>
  *  Tatsumi Hosokawa
  *  Theron Tarigo <theron.tarigo@gmail.com>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Hurst <tom@hur.st>
  *  Tim Bishop <tim@bishnet.net>
  *  Timothy Beyer <beyert@cs.ucr.edu>
  *  Tobias Roth <ports@fsck.ch>
  *  UMENO Takashi <umeno@rr.iij4u.or.jp>
  *  Vincent Tantardini <vinc@freebsd-fr.org>
  *  Volker Stolz <stolz@i2.informatik.rwth-aachen.de>
  *  Winston Weinert <winstonw@lavabit.com>
  *  Ying-Chieh Liao <ijliao@csie.nctu.edu.tw>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Yoshiro MIHIRA <sanpei@sanpei.org>
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  Zane C. Bowers
  *  Zhihao Yuan <lichray@gmail.com>
  *  asami
  *  chinsan
  *  dirk.meyer@dinoex.sub.org
  *  dom@myrddin.demon.co.uk
  *  eimar.koort
  *  gpalmer
  *  gpalmer@FreeBSD.org
  *  grog
  *  gurkan@phys.ethz.ch
  *  hemi@puresimplicity.net
  *  ijliao
  *  incabulos@mac.com
  *  jacs
  *  janek
  *  jhb
  *  jkh
  *  jkh@FreeBSD.org
  *  jmz
  *  joerg
  *  johalun0@gmail.com
  *  jonny
  *  jsellens
  *  krion
  *  matt@bdd.net
  *  michael johnson <ahze@ahze.net>
  *  nkazushi@highway.or.jp
  *  od <od@iclub.nsu.ru>
  *  oleg@bsdpower.com
  *  roam@FreeBSD.org
  *  trevor
  *  will

With hat:	portmgr

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

Remove # $FreeBSD$ from Makefiles.

Remove hand-rolled `post-extract' target and simply set GH_SUBDIR which DTRT automagically.

Requested by:	tobik

- Switch to USES+=compiler:c++11-lang to unbreak on PowerPC instead   of the approach taken in r513793 (Clang was never required for this   port, any not-so-ancient compiler would suffice) - Sort the values on the USES list; avoid hardcoding version numbers - Pluralize the noun in the COMMENT line and make it a bit shorter

Reviewed by:	pkubaj
PR:		239181

Prepare for powerpc-on-clang by deleting hard-coded tests for architecture as a stand-in for "are we running on gcc".  (PR 239181)

As a side-effect, adding the stanza

  MAKE_ENV= LLVM_CONFIG=${LOCALBASE}/bin/llvm-config${LLVM_DEFAULT}

obviates the need for hardcoding definitions for CC, CXX, and CPP
(later linimon testing).

PR:		239181
Approved by:	danfe (maintainer-timeout, > 2 months)

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

- Update to version 1.1.1, install manual page - Add run-time dependency on sql-sqlite3 to enable save/restore   of profile and other settings [*] - Fix some stage Q/A warnings while here

Reported by:	Lundin Cahill [*]

Fix Qt5 symbol version scripts to put the catch-all clause first.  When a symbol matches multiple clauses the last one takes precedence.  If the catch-all is last it captures everything.  In the case of Qt5 libraries this caused all symbols to have a Qt_5 label while some should have Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1] https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2] https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3] https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

Update Qt5 to 5.12.0

http://blog.qt.io/blog/2018/12/06/qt-5-12-lts-released/

- This breaks support for libressl again. Patches are welcome.

PR:		233705
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Fix build on GCC-based architectures with USE_GCC correctly gated.

PR:		232283
Submitted by:	Piotr Kubaj
Approved by:	maintainer

Merge lang/qt5-qml and x11-toolkits/qt5-quick into x11-toolkits/qt5-declarative

- There was no obvious reason to split these ports, and it makes
  porting simpler; the set of ports using either mostly coincided.

Exp-run by:	antoine
PR:		223687
PR:		232751

Bump PORTREVISION for ports depending on the canonical version of GCC in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	→https://reviews.freebsd.org/D15540

Bump PORTREVISION for ports depending on the canonical version of GCC (via Mk/bsd.default-versions.mk and lang/gcc) which has moved from GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Bump PORTREVISIONS for ports depending on the canonical version of GCC and lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some circumstances such as versions of FreeBSD or platforms).

In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

- Since our GitHub-hosted distfile support understands external projects,   use it instead of storing manually-fetched distfile in `local-distfiles', - Remove bogus USE_LDCONFIG knob and avoid symlinking to an absolute path - As support for some older FreeBSD versions was removed in r398738, merge   in-place alteration of the `qmltermwidget/lib/kpty.cpp' file (previously   conditional) into existi

- Drop 8.x support

Approved by:	portmgr blanket

Update ports in the remaining categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

Add a port of cool-retro-term, nifty terminal emulator which mimics the old cathode display.

WWW: https://github.com/Swordfish90/cool-retro-term