audio/sdl2_mixer2.8.2

audio/sdl2_mixer: update 2.8.1 → 2.8.2

audio/sdl2_mixer: update 2.8.0 → 2.8.1

audio/sdl2_mixer: Add missing pkgconfig dependency

PR:		278490
Submitted by:	diizzy

audio/sdl2_mixer: sort options, remove stray OGG option

PR:		278510
Submitted by:	diizzy

audio/sdl2_mixer: update 2.6.3 → 2.8.0

- Remove tremor support, as port was removed from the tree

audio/opus: bump consumers after update to 1.4

audio/sdl2_mixer: update 2.6.2 → 2.6.3

audio/flac: bump port revision of consumers after update to 1.4.1

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

audio/sdl2_mixer: update 2.6.1 → 2.6.2

- Fix installation with WITH_DEBUG
- Update pkg-descr

audio/sdl2_mixer: update 2.0.4 → 2.6.1

audio/libmad: Set SONAME to libmad.so.0 instead of libmad.so.0.16.2

- Bump PORTREVISION of dependent ports for shlib change
- Bump PORTREVISION for package change

audio/fluidsynth: Update to upstream version 2.2.4

MFH:		2021Q4

audio/fluidsynth: Update to upstream version 2.2.3

MFH:		2021Q4

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

a-b: Add missing USES={gnome,php,sdl,xorg}

Chase update to audio/fluidsynth; bump PORTREVISION of dependent ports

PR:		240890

Update MASTER_SITES and WWW

Approved by:	portmgr (blanket)

Chase update of fluidsynth to 2.0.3

PR:		233448

- Update to 2.0.4 - Disable dynamic linking - Regroup options

Bump PORTREVISIONS to chase update to audio/fluidsynth 1.1.11

PR:		228265

Take maintainership of SDL/SDL2 ports

Reset mva@'s ports, he handed in his ports bit.

- Update sdl20 and satellite libraries to latest versions

sdl2: 2.0.3 -> 2.0.4
sdl2_image: 2.0.0 -> 2.0.1
sdl2_mixer: 2.0.0 -> 2.0.1
sdl2_net: 2.0.0 -> 2.0.1
sdl2_ttf: 2.0.12 -> 2.0.14

- Add LICENSE_FILE
- Strip libraries
- Switch to USES=localbase where applicable

PR:		207671
Submitted by:	devnexen@gmail.com, amdmi3
Approved by:	maintainer timeout (mva, 1 month)
Exp-run by:	antoine

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

audio/sdl{,2}_mixer: sync and add missing option descriptions

PR:		202689

audio/sdl{,2}_mixer: fix VORBIS=on logic after r410689

PR:		202689
Reported by:	antoine

audio/sdl{,2}_mixer: add TREMOR option

TREMOR is enabled by default on platforms without hardware floating point.

PR:		202689
Approved by:	maintainer timeout (6 months)

Add FLUIDSYNTH option generic description, and remove ad-hoc setting in ports where it is applicable (alongside with other shared descriptions).

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in the 32 ports that still use it.  Bump PORTREVISION on their dependent ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version.  When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.

Also remove the devel/pcre dependency from USE_GNOME=glib20.  It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it.  The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20.  Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.

PR:		195724
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Update the default version of GCC in the Ports Collection from GCC 4.7.4 to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Convert multimedia/smpeg* to USES=libtool and bump dependent ports - Add INSTALL_TARGET=install-strip

Remove indefinite articles and trailing periods from COMMENT, plus minor COMMENT typos and surrounding whitespace fixes. Categories A-C.

CR:		D196
Approved by:	portmgr (bapt)

- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

- Unbreak build after the recent audio/libmodplug update

Reported by:		pkg-fallout

- Switch devel/sdl20 to use the autotools-based configuration, since the   cmake-based one is not maintained that well - Fix library naming to ensure backwards compatibility on minor version   changes - Bump the PORTREVISION on ports depending on devel/sdl20, since its   shared library name changed

PR:		ports/183975
Submitted by:	Jan Kokemüller <jan.kokemueller@gmail.com>

- Add MP3 support via multimedia/smpeg2 (new option SMPEG)

PR:		ports/183364
Submitted by:	Vladimir Kondratiev <wulf@mail.mipt.ru>

- Fix patching the .pc installation path to avoid wrong expansions

Submitted by:	many

- Update devel/sdl20 to version 2.0.1 - Bump PORTREVISIONs for SDL2-related ports to chase the changed SDL2   shlib version - Enable staging support for the SDL2 ports - Switch to new LIB_DEPENDS format for the SDL2 ports - Add LICENSE to the SDL2 ports - Use gmake USES for the SDL2 ports

- Add mikmod support for audio/sdl_mixer and audio/sdl2_mixer - While here, simplify the OPTIONS usage

PR:		ports/181695
Submitted by:	Jan Beich <jbeich@tormail.org>

Add NO_STAGE all over the place in preparation for the staging support (cat: audio)

Convert audio from USE_GMAKE to USES=gmake While here: - Trim headers - Convert some USE_GNOME=pkgconfig to USES=pkgconfig - Add some missing pkgconf dependencies - Convert some USE_GNOME=gnomehack to USES=pathfix

SDL2 has been officially released.

- Update devel/sdl20, audio/sdl2_mixer, graphics/sdl2_image,
  graphics/sdl2_ttf and net/sdl2_net to version 2.0.0

- Update to the latest RC

Welcome SDL2 to the FreeBSD ports system!

A set of new SDL2 related ports has been added, which are essentially
the same as their corresponding port for SDL1.2:

    audio/sdl2_mixer
    graphics/sdl2_image
    graphics/sdl2_ttf
    net/sdl2_net

A set of new USE_SDL knobs is available to enable SDL2 and its related
ports to be added as dependency to ports. Use either of

  USE_SDL= sdl2 image2 mixer2 net2 ttf2

to pull in the specific sdl2_* or sdl20 port.