comms/gnuradio3.10.12.0_15

comms/gnuradio: use wx 3.2

PR:		265093

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

*/*: bump all consumers after recent boost upgrade

devel/boost-all: bump all library consumers after boost upgrade

PR:	246106

devel/py-qt5, devel/py-sip: Update versions

- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)

PR:		261685
Exp-run by:	antoine

x11-toolkits/py-wxPython4: Update to 4.1

- Rename wxPython40 to wxPython4
 - Update to 4.1 version
 - Fix wxgtk31 for string
 - Use wxGtk31 instead of wxgtk30
 - Fix kicad* ports with wxgtk31/wxPython 4.1

Changes:
 - https://www.wxpython.org/news/2020-11-21-wxpython-411-release/index.html

Reviewed by:	tcberner
Approved by:	yuri, bofh
Differential Revision:	D34080

PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.

SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.

PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.

This allows us to be in adequacy with the packages that the author of these
libraries proposes, namely:

PyQt - devel/py-qt5-pyqt
PyQt-Charts - x11-toolkits/py-qt5-chart
PyQt-NetworkAuth – net/py-qt5-networkauth
PyQt-WebEngine – www/py-qt5-webengine
SIP – devel/py-sip
py-sip - devel/py-qt5-sip
PyQt-builder - devel/py-qtbuilder
Qscintilla - devel/py-qt5-qscintilla2

Reviewed by:	diizzy, kde
Tested by:	kai, rhurlin, arrowd, madpilot
Approved by:	makc, tcberner, kde
Differential Revision:	https://reviews.freebsd.org/D33237
Exp-run by:	antoine

math/gsl: bump portrevision of consumers after update to 2.7.1

PR:		260201

comms/gnuradio: Fix plist problem

fix plist when PYTHON_VERSION != 3.8

PR:		ports/261060
Reported by:	eric@camachat.org

comms/gnuradio: Update to 3.8.4

- Removed guile as it is not needed
(From CHANGELOG.md)

All notable changes to GNU Radio will be documented in this file.

The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/)
and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html),
starting with version 3.7.12.0.

Older Logs can be found in `docs/RELEASE-NOTES-*`.

API is compatible with C++ code written against previous v3.8 releases.

ABI (link time) compatibility is not guaranteed. Out-of-tree C++ code
linked to previous v3.8 releases should be rebuilt against this version.

- Fix drag and drop issue with Quartz
- Fix desync when dragging block
- Update disabled blocks if they depend on others
- Allow short and byte as valid types in an enum
- Fix evaluation of interdependent variables

- Set VERSION_PATH to 0 in new modules, instead of using GIT rev
- For Python3, return correct exeption ModuleNotFoundError instead of ImportError

- New Matrix Interleaver block

- Fix "hide" expressions in yml files

- Remove unused msg output port from Chunks To Symbols block yml

- Add "shift" parameter to Log Power FFT

- Fix: tags on the last sample were not shown

- Fix: U and V channels were reversed on sink blocks

At LEAST the following authors contributed to this release.

- Adrien Michel <adriengit@users.noreply.github.com>
- David Winter <david.winter@analog.com>
- Emmanuel Blot <emmanuel.blot@free.fr>
- Håkon Vågsether <hauk142@gmail.com>
- Jared Dulmage <jared.dulmage@caliola.com>
- Jason Uher <jason.uher@jhuapl.edu>
- Jeff Long <willcode4@gmail.com>
- Marc L <marcll@vt.edu>
- Marcus Müller <mmueller@gnuradio.org>
- Martin Braun <martin@gnuradio.org>
- Ron Economos <w6rz@comcast.net>
- Volker Schroer

INSTALLS_ICONS: retire the macro and rework the related dependencies

While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)

Cleanup: for ports under c* categories, drop redundant GH_{ACCOUNT,PROJECT}.

audio/jack: Update to Jack2: 0.125.0 -> 1.9.16

Big thank you to Florian Walpen <dev@submerge.ch> and
Goran Mekić <meka@tilda.center> for working on Jack2.

PR:		251125
Submitted by:	Florian Walpen <dev@submerge.ch> (original version)

math/gsl: update to 2.7

From [1]

* What is new in gsl-2.7:
	* fixed doc bug for gsl_histogram_min_bin (lhcsky at 163.com)
	* fixed bug #60335 (spmatrix test failure, J. Lamb)
	* fixed bug #36577
	* clarified documentation on interpolation accelerators (V. Krishnan)
	* fixed bug #45521 (erroneous GSL_ERROR_NULL in ode-initval2, thanks to M. Sitte)
	* fixed doc bug #59758
	* fixed bug #58202 (rstat median for n=5)
	* added support for native C complex number types in gsl_complex
	   when using a C11 compiler
	* upgraded to autoconf 2.71, automake 1.16.3, libtool 2.4.6
	* updated exponential fitting example for nonlinear least squares
	* added banded LU decomposition and solver (gsl_linalg_LU_band)
	* New functions added to the library:
	      - gsl_matrix_norm1
	      - gsl_spmatrix_norm1
	      - gsl_matrix_complex_conjtrans_memcpy
	      - gsl_linalg_QL: decomp, unpack
	      - gsl_linalg_complex_QR_* (thanks to Christian Krueger)
	      - gsl_vector_sum
	      - gsl_matrix_scale_rows
	      - gsl_matrix_scale_columns
	      - gsl_multilarge_linear_matrix_ptr
	      - gsl_multilarge_linear_rhs_ptr
	      - gsl_spmatrix_dense_add (renamed from gsl_spmatrix_add_to_dense)
	      - gsl_spmatrix_dense_sub
	      - gsl_linalg_cholesky_band: solvem, svxm, scale, scale_apply
	      - gsl_linalg_QR_UD: decomp, lssolve
	      - gsl_linalg_QR_UU: decomp, lssolve, QTvec
	      - gsl_linalg_QR_UZ: decomp
	      - gsl_multifit_linear_lcurvature
	      - gsl_spline2d_eval_extrap
	* bug fix in checking vector lengths in gsl_vector_memcpy (dieggsy@pm.me)
	* made gsl_sf_legendre_array_index() inline and documented
	      - gsl_sf_legendre_nlm()

[1] http://git.savannah.gnu.org/cgit/gsl.git/tree/NEWS

PR:		256423
Exp-run by:	antoine

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1

PR:		254218
Exp-run by:	antoine

PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0

* PyQt5: update to 5.15.3

This is a minor feature and bug-fix release. There are corresponding releases of the other PyQt5-related packages.

 - Added the missing QImage.setAlphaChannel().
 - Support for the QtNetworkAuth library has been moved to a separate PyQtNetworkAuth package.
 - Wheels no longer bundle the corresponding Qt libraries and instead automatically install them from an external wheel.

* QScintilla2: update to 2.12.0

This adds support for Qt6 and removes support for Qt4.

 - Change the new distname (again)i due to a conflict
 - Use the new sip-build system

* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo

PR:		253865
Exp-run by:	antoine

Remove PY_SPHINX from ports using Python 3

Approved by:	 portmgr blanket
Differential Revision:	https://reviews.freebsd.org/D28093

Update PyQt5 to 5.15.2, sip to 5.5.0, py-qtbuilder to 1.6.0 and py-qt5-sip to 12.8.1

PR:		251764
Exp-run by: antoine

Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5

- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location, devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts

[1] RiverBankComputing doesn't offer links to download latest version of some ports

PR:		247369
Reviewed by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D25749
Exp-run by:	antoine

Drop false dependency on pygtk2 gnuradio actually used pygobject3 meaning gtk3

Move devel/swig30 to devel/swig and update to 4.0.1

- Do not silence installation message
- Update dependent ports:
  - Fix build with swig 4.0.1
  - Update *_DEPENDS
  - Remove BINARY_ALIAS

Changes:	http://www.swig.org/news.php
PR:		246613
Exp-run by:	antoine

x11-toolkits/wxgtk30: Update to 3.0.5.1

Changelog:
  - https://raw.githubusercontent.com/wxWidgets/wxWidgets/v3.0.5/docs/changes.txt

PR:	 246218
Approved by:	tcberner (mentor)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D24808

Update Sphinx

- Repocopy textproc/py-sphinx to textproc/py-sphinx18

  Update it to 1.8.5 (latest version from 1.8.X).
  This version supports Python 2 and 3.
  Add test target.

- textproc/py-sphinx: Update to 3.0.2

  Python 3 only (3.5+).
  Add test target.

- Mk/Uses/python.mk: Add PY_SPHINX

  Shared macro to use with flavors and not break
  ports with USES=python (all versions).

  Python >=3.5  --> textproc/py-sphinx (v3.0.2)
  Python < 3.5  --> textproc/py-sphinx18 (v1.8.5)

  All ports that uses sphinx were changed to use the new variable
  ${PY_SPHINX} in the dependency line, exceptions:

    * Ports that fails to build with sphinx 3.0.2 because of code.
      They are pointing to textproc/py-sphinx18 directly.
      There aren't many ports.

    * Ports that doesn't know Python flavors.

- Add several patches to fix Sphinx consumers

  The most common issues are related with pkg-plist, the output
  files from Sphinx changes between versions, keep this dynamically
  is the better approach.

  This will save time in future sphinx updates.

PR:		245629
Exp-run by:	antoine

comms/gnuradio: fix build on GCC architectures

Use C++11 compiler:
cc1plus: error: unrecognized command line option "-std=c++11"

comms/gnuradio: Update 3.8.1.0-rc1 -> 3.8.1.0

Also update WWW.

Reported by:	portscout

- Removed zombie dependancy on clang since system clang now works - Now uses python3 by default remove python2 dependancy - split the VOLK project into separate port

Change log from upstream follows
## [3.8.1.0-rc1] - 2020-02-16

### Changed

#### Project Scope

- clang-tidy improvements
  - Throw exceptions by value, catch by reference
  - `emplace_back` where applicable
  - `empty()` instead of `vector::size() == 0`

### Fixed

#### Project scope

- FindQwt paths
- floatAlmostEqual unittest assert function wrongly passing on sequence types
- Only require boost unittest when testing is enabled
- FindLOG4CPP typo

#### gnuradio-runtime

- block gateway shadowed system port
- Flaky message passing unit test contained timeout (not the test's job)
- ctrlport/`rpcaggregator` & Co: removed storage of references to scope-lifetime objects
- Sine table generation python was wrong
- `get_tags_in_range` for delay < (end-start)
- premature tag pruning

#### gr_modtool

- wrong use of `input` -> `raw_input`
- allow empty argument list
- testing
- check for and deny TSB under Python
- QA addition bugs

#### gr-analog

- clipping in FM receiver: remove superfluous gain
- C++ generation for multiple blocks

#### gr-audio

- portaudio source: lock acquisition

#### gr-blocks

- broken `rotator` workaround

#### gr-digital

- `map_bb` buffer overflow
- `map_bb` thread safety
- `additive_scrambler `count based reset

#### gr-fec

- heap corruption in `async_decoder`
- `cc_encoder` was broken for constraint lengths > 8

#### gr-fft

- restore Boost 1.53 compat

#### gr-qtgui

- no longer requiring unnecessary key in `edit_box_msg`

#### gr-uhd

- fixed examples under Py3
- multichannel objects not populating channels

#### GRC

- several issues with YAML files
- nested objects now properly populate namespaces
- comments now included in block bounds calculation
- Wiki documentation link removed from OOT blocks' docs tab
- Dragging connections to auto-hide ports works now

### Added

#### Project Scope

- Codec2 development branch / future compat
- Boost 1.71 compat
- CI now checks for formatting

#### gnuradio-runtime

- dot graphs now contain message edges

#### gr-uhd

- UHD Filter API

#### GRC

- block affinity, buffer sizes available as advanced options for blocks
- testing

x11-toolkits/py-wxPython40: GUI toolkit for the Python programming language

py-wxPython40 aka Phoenix is a reborn of wxPython and in particular it allows to use wxWidgets with Python3.


  - Add x11-toolkits/py-wxPython40
  - Replace wxPython30 by wxPython40 when python wxWidgets is required
  - Fix cad/kicad and cad/kicad-devel to use wxPython40 "Phoenix"
  - Update comms/congruity, graphics/py-mayavi from wx 2.8 to 3.0
  - While I'm here fix portlint per emulators/playonbsd
  - Remove RUN_DEPENDS from USE_WX per graphics/djvusmooth
  - Bump portversion
  - Fix unicode on x11-toolkits/wxgtk30 and take Maintainer'ship

PR:     241893
Reviewed by:	koobs, tcberner
Approved by:	tcberner (mentor)
Differential Revision:  https://reviews.freebsd.org/D21915
Exp-run by:     antoine

- According to @koobs the dependency on pyephem/ephem is spurious hence removed. - When gnuradio was first imported into the tree, UHD (Ettus) was pretty much the only   viable high speed device for it. This is no longer true so default option removed. - Noted plist problem with removed UHD corrected.

PR:		ports/240546
Reported by:	w.schwarzenfeld@utanet.at
MFH:		2019Q4

devel/boost-*: update to 1.72.0

Changes:	http://www.boost.org/users/history/version_1_72_0.html
PR:		241449
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D22136

math/gsl: update to 2.6

- math/p5-Math-GSL does not seem to have any upstream activity to make it work with this version -> mark it broken
  - this also breaks the two consumers of this port

- biology/gemma: has a conflict with cblas, and is makred broken.

PR:		241363
Exp-run by:	antoine

comms/gnuradio: Drop nop HAVE_PORTDOCS

Switch default devel/llvm* to 90

PR:		239682
Reviewed by:	tobik
Differential Revision:	https://reviews.freebsd.org/D21172

devel/boost-*: update to 1.71.0

Changes:	http://www.boost.org/users/history/version_1_71_0.html
PR:		238827
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D20774

Unbreak on non head FreeBSD Use latest clang on all versions of FreeBSD

Submitted by:		pkg-fallout

Changelog:

## [3.8.0.0] - 2019-08-09

Witness me!

Tonight, we release GNU Radio 3.8.0.0.

It's the first minor release version since more than six years, not without
pride this community stands to face the brightest future SDR on general purpose
hardware ever had.

Since we've not been documenting changes in the shape of a Changelog for the
whole of the development that happened since GNU Radio 3.7.0, I'm afraid that
these release notes will be more of a GLTL;DR (git log too long; didn't read)
than a detailed account of what has changed.

What has _not** changed is the fact that GNU Radio is centered around a very
simple truth:

> Let the developers hack on DSP. Software interfaces are for humans, not the
> other way around.

And so, compared to the later 3.7 releases, nothing has fundamentally modified
the way one develops signal processing systems with GNU Radio: You write blocks,
and you combine blocks to be part of a larger signal processing flow graph.

With that as a success story, we of course have faced quite a bit of change in
the systems we use to develop and in the people that develop GNU Radio. This has
lead to several changes that weren't compatible with 3.7.

**This is an excerpt only:**

### Fixed

#### Project Scope

- Roughly 36 dBBug, (ETOOMANYBUGS)
- Fixed .so versioning

### Changed

#### Project Scope

- C++11
- merged the wholeness of the `next` branch
- Dependency version bumps: CMake, GCC, MSVC, Swig, Boost
- New dependencies: MPIR/GMP, Qt5, gsm, codec2
- Removed dependencies: libusb, Qt4, CppUnit
- Python: Python 2 & Python 3 compatible. 3.8 will be the last Py2k-compatible
  release series
- gengen was replaced by templates (if you don't know gengen, don't do any
  research; save yourself that sorrow)
- Modern CMake (as far as feasible at this point)
- VOLK version updated to v2.0.0
- .clang-format file now dictates coding style
- clang-format'ed the whole tree.
- installed CMake files now tell about configuration

#### gnuradio-runtime

- reworked fractional tag time handling, especially in the context of resamplers

#### GRC

- C++ generation as option
- YAML instead of XML
- removed `blks2`
- much better canvas tooling
- consistent gobject usage
- ROUNDED ARROWS

#### gr-qtgui

- moving from Qt4 to Qt5

#### gr-utils

- `gr_modtool` now vastly improved

#### gr-vocoder

- improved versatility
- removed in-tree libgsm, libcodec2, use system-wide libs

### Removed

#### Project Scope
- Modules `gr-comedi`, `gr-fcd` and `gr-wxgui` are gone

#### gr-comedi

- nobody could remember who used this, or for what. It has seen 0 active code
  contributions in the 3.7 lifecycle

#### gr-digital

- python-based `packet_encoder` and related tools: Bugs that were sporadic and
  never fixed, so after long deprecation, we're removing it

#### gr-fcd

- since it's currently untestable by the CI, it's being removed, as there was no
  code contributions. Generally, we strive to include all batteries with GNU
  Radio. Re-integration within a more general SDR interface would be desirable.

#### gr-utils

- removed PyQwt (dead) based tools

#### gr-wxgui

- Unmaintained, breaks on increasingly many systems, always was slower than
  Qtgui. We've been starting to tell people to migrate to Qt since at
  least 2015. Now, we're finally removing it.

====
Mike English notes:

Note that the 3.8.0.0 tarball is again available from
https://www.gnuradio.org/releases/gnuradio/ and the volk dependency
(a submodule in the git repo) is included so we can do away with
USES_GITHUB and go back to building from the official release tarball.

I've run this through portlint and poudriere already, so it should apply
cleanly.
====

PR:		ports/239793
Submitted by:	mike.english@gmail.com

Update to 3.8.0.0-rc2

# Changelog
All notable changes to GNU Radio will be documented in this file.

The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/)
and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html), starting with version 3.7.12.0.

Older Logs can be found in `docs/RELEASE-NOTES-*`.

## [3.8.0.0-rc2] - 2019-07-20

This is the second release candidate for GNU Radio 3.8.

### Fixed
#### Project Scope
- Last minute patch lead to SWIG libraries not getting installed into the right Python paths
#### gr-utils
- `gr_modtool`: Paths with spaces in them used to break

### Changed
#### GRC
- Copy & Paste behaviour now like on 3.7: appending numbers to block IDs only on conflicts

## [3.8.0.0-rc1] - 2019-07-17

This is the release candidate for GNU Radio 3.8.

For brevity reasons, this document does NOT contain a complete CHANGELOG
comparing 3.8.0.0 to 3.7.0, because the development model changed underway, and
there's no human-feasible way to detangle the changes from more than six years
of development.

The major user-relevant changes will be noted here in the actual release.

What we can do here is point out that we've got a glorious amount of 215
individual contributors that added at least one commit since 3.7.0.

This is a **big** step towards the future of the world's most popular FOSS SDR
framework.

Let us ride eternal, shiny and chrome.

Pet Portlint

PR:		ports/239345
Submitted by:	mike.english@gmail.com

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

comms/gnuradio: Update to 3.8tech-preview-381

The previous commit kept GH_TAGNAME, as jbeich@ noted.

* Rebuilt pkg-plist
* Use GH_TUPLE for volk

Reported by:	jbeich

comms/gnuradio: Update 3.8.g20190309 -> 3.8tech-preview-381

Their PR#2500 officially fixed boost compatibility.

Clean up plist

Related to revision 499061 bump ports with USES=fortran to have them benefit from the improved situation where libgcc_s is only used when absolutely necessary.

Suggested by:	tijl

Unbreak gnuradio due to boost 1.70 Remove patch needed for cpu affinity which is now not needed

devel/boost-*: update to 1.70.0

Changes:	http://www.boost.org/users/history/version_1_70_0.html
PR:		235956
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D19303

Really fix DEPENDS

Fix DEPENDS

comms/gnuradio doesn't work with python3

PR:		234633

Update to 3.8 git version to move from Qt4 to Qt5

## unreleased

### Fixed
#### Project Scope
- `boost::posix_time::[milli]second` takes integer numbers, and we now at least cast the floats to integers, as Boost 1.67 forced us to realize we're (incorrectly) using floating point her
- CMake: using regex to match compiler against "Clang" now enables correct build on OS X
#### GRC
- Fixed GRC bug which broke WX and Qt (by altering the template code), in multiple (less than awesome) steps
#### gr-analog
- `fmdet_cf`'s derivative coefficients were wrong.
#### gr-blocks
- `float_array_to_int`: int32 limits were wrongly hardcoded.
- Fixed the undefined behaviour happening in `float_to_complex` when accessing the second input_items element in the single-input case

### Added
#### gr-analog
- QA for complex cosine
#### gr-utils
- `gr_modtool` now with autocompletion candidates for `rm`

### Changed
#### Project Scope
- Removed cppunit from all unit tests, replaced by Boost
- Removed the cppunit dependency