comms/gnuradio3.10.12.0_15

Update to 3.7.8 USE_GCC=yes causes the build to fail on systems where clang and libc++ are used by default (see bug 202143, for example). This essentially means comms/gnuradio currently only builds on 9.x. The problem is caused by the fact that on 10.x and later boost is likely built using clang and libc++, but USE_GCC=yes forces gnuradio to be built with GCC and libstdc++. Ports r392951 mentioned

PR:		ports/203500
Submitted by:	takefu@airport.fm

- Fix build on 10.x: you can't use gcc when boost is built with clang; and it builds with clang just fine

Approved by:	portmgr blanket

Replace devel/cppunit with devel/cppunit113.

Approved by:	bdrewery (maintainer)

Convert ports to use the options helpers in categories [abc]*, and minor fixes.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3412?

Uses/cmake.mk: Replace CMAKE_ENV with CONFIGURE_ENV.

Instead of defining a variable that is almost always based on CONFIGURE_ENV,
just use CONFIGURE_ENV directly.

This also matches the behavior of other ports that do not use autotools (so
most ports can just worry about CONFIGURE_ENV). Additionally, the fact that
we do not use ?= means we do not have problems if another file in Uses/
needs to set CONFIGURE_ENV (with CMAKE_ENV, the order of the arguments to
USES would matter).

Ports which set CMAKE_ENV have been adjusted accordingly. In most cases,
CMAKE_ENV was just replaced with CONFIGURE_ENV, the exceptions being:
* databases/sqliteman: CMAKE_ENV line removed; setting QMAKESPEC there has
                       no effect on the build system.
* devel/freeocl: CMAKE_ENV line removed; FREEOCL_CXX_COMPILER is already
                 retrieved from the CMAKE_CXX_COMPILER variable in the build
                 system.
* graphics/openimageio: CMAKE_ENV line removed; setting Qt variables there
                        has no effect on the build system.

Reviewed by:		makc
Differential Revision:	https://reviews.freebsd.org/D3403

- Update to later version of gnuradio - fix build with portaudio - clang builtin's are conflicting with gnuradio so use USE_GCC for now

- Mark BROKEN on 9.x:

/wrkdirs/usr/ports/comms/gnuradio/work/gnuradio-3.7.4/volk/kernels/volk/volk_8u_x4_conv_k7_r2_8u.h:191: error: incompatible type for argument 1 of '__builtin_ia32_psrlqi128'

Approved by:	portmgr blanket
Reported by:	pkg-fallout

All directory handling is now automatic: cleanup plist

Update portaudio to v19/Remove portaudio2 [1] Chase portaudio change Add patches from debian for games/cultivation Add patches from upsteam for audio/rezound Mark py-fastaudio as broken

Approved by:	maintainer

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

Make fonts repecting XDG

Xorg is now looking in ${LOCALBASE}/share/fonts by default
Xorg now accepts symlinks in etc/X11/fontpath.d (as decribed in Xserver(1))
Large cleanup on lots of font ports
All fonts are now properly dynamically generating fonts.dir and fonts.scale
instead of sometime overwriting existing ones)
All fonts are generating fontconfig's cache
Improve consistency in fonts ports

Finally unbreak the build by preloading GCC_DEFAULT libs paths. It is complicated by the intermix of gcc and gfortran libs being intermixed with system libs. Especially by dynamically loaded modules into python being linked against gfortran or current gcc. I realise using GCC_DEFAULT lib paths is not a general solution.

Fix DEPENDS

Fix some _DEPENDS

- Convert ports from cad/, chinese/, comms/ and converters/ to new   USES=python

Approved by:	portmgr (implicit)

Update the default version of GCC in the Ports Collection from GCC 4.7.4 to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Update to 3.7.4 - Important Bug Fixes and Additions Fixed shutdown in message passing apps Fixed PortAudio detection during configuration Fixed QWT detection during configuration Fixed gr::analog::agc3 volk kernel alignment Fixed/improved support of audio on OSX Improved performance on network-based sources and sinks Fixed pfb_arb_resampler tag propagation Fixed segfault in fast_atan2f Updated c

math/fftw3: - Add USES=libtool and bump dependent ports - Add INSTALL_TARGET=install-strip - Remove PTHREAD_CFLAGS and PTHREAD_LIBS - Use MAKE_CMD

math/gsl: - Add USES=libtool and bump dependent ports - Add USES=pathfix and INSTALL_TARGET=install-strip

Approved by:	portmgr (implicit, bump unstage port)

Unbreak

Reported by:	pkg-fallout since a few weeks

comms/gnuradio: use WX 3.0

Approved by:	portmgr (bapt, blanket)

- Changed Maintainer to hamradio@ - Added shebangfix to USES

Approved by:	maintainer (db@)

- Don't remove mtree directories

Approved by:	portmgr

Do not overwrite build_depends

Reported by:	pkg-fallout

- Update to gnuradio 3.7.2.1

GRC Bus Ports (Nicholas McCarthy)

Bus ports in the GNU Radio Companion (GRC) allow ganging block input
or output ports into a single port for display and connections. This
simplifies flowgraph entry when dealing with blocks that work with an
arbitrary number of streams.

For further information, see:

http://gnuradio.org/redmine/projects/gnuradio/wiki/Busports

And see

http://gnuradio.org/redmine/projects/gnuradio/wiki/ChangeLogV3_7_1

Update the default version of GCC used in the Ports Collection from GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

- Updating to 3.7.2 - disabled USRP default option until usrp is fixed on -10 and head - disable docs on i386 for now as it fails to build - enable staging

PR:		ports/186799
Submitted by:	lev

- Bump PORTREVISION after KDE4_PREFIX change

Chase boost and icu bump While here convert some LIB_DEPENDS

Python cleanup: - USE_PYTHON* = 2.X -> USE_PYTHON* = 2 - USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes Reviewed by:	python (mva, rm) Approved by:	portmgr-lurkers (mat)

In preparation for making libtool generate libraries with a sane name, fix all LIB_DEPENDS in comms

Update to libmpc version 1.0.1 which brings the following fixes:

- Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat: comms)

Convert to new perl framework Convert USE_GMAKE to USES

Update math/gsl to 1.16 and adjust some dependent ports

- Update to gnuradio 3.6.5

Important new features (3.6.5):
New OFDM PHY layer (Martin Braun, Ben Reynwar)
This release includes new OFDM PHY layer blocks in gr-digital.

New runtime logging capability (Tom Rondeau)
GNU Radio has a logging interface to enable various levels of logging
information to be printed to the console or a file.

And Numerous bug fixes

Reviewed by:	martymac

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex instead to make migration to TeXLive easier.

In preparation of removing devel/libusb (expires 2013-04-30), remove it from these ports.

Other changes:
- convert Makefile header
- convert to optionsNG
- remove indefinite article from comment
- drop support for FreeBSD < 8.0
- pet portlint (leave library ABI versions in LIB_DEPENDS)
- net-mgmt/spectools: change option name from GTK to GTK2 to use default
  description from bsd.options.desc.mk

Approved by:	portmgr (bapt)

Release 3.6.3 is a significant release, adding major new capabilities and many bug fixes, while maintaining strict source compatibility with user code already written for the 3.6 API.

Much of the code was the result of two events, the September 2012 GNU
Radio conference in Atlanta, GA, and the November 2012 GNU Radio
hackfest held at Ettus Research in Mountain View, CA. Additional work
(not discussed here) from these events has been incorporated into the
'next' branch of the code repository, and will become part of the 3.7
API release series.

New features include asynchronous message passing between blocks, new
blocks for interfacing with operating system networking stacks, the
ability to write new signal processing blocks in Python, enhanced file
source and sinks that can store metadata, flowgraph latency control,
improvements to documentation, and further conversion of existing code
into the 3.7 API organization (while leaving existing blocks in
place.)

The detailed changelog is here:

http://gnuradio.org/redmine/projects/gnuradio/wiki/ChangeLogV3_6_3

- convert USE_CMAKE to USES - while here clean up some ports from CMAKE_VERBOSE, which is intended   for users

Approved by:	portmgr (miwi)

Bump PORTREVISON after devel/py-sip and devel/qscintilla2 update.

x11-toolkits/py-qt:
- mark BROKEN: does not build with latest devel/py-sip

Chase boost update

- Update to 3.6.2 - Needs the usrp port

Tested by:	lrk@ovillatx.sytes.net

- Unbreak gnuradio build - sdcc changed syntax slightly, chase this in diffs

Feature safe:	yes

- update png to 1.5.10

- remove maintainer tags from pkg-descr

Approved by:	portmgr
Approved by:	bapt (mentor)

- update fftw3* to 3.3 [1], and adjust dependent ports - make use of optimizations by default, where possible (quad flavor to follow shortly, and mpi at a later date)

Suggestions and patches from:	ache, C. Burns, wen

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS) - Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:		157936
Submitted by:	myself
Exp-runs by:	pav
Approved by:	pav

Update math/gsl to 1.15, and adjust PORTREVISION and LIB_DEPENDS of dependent ports