graphics/graphviz 16.1.0_2

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

Ports should not force the php version they use.

Sponsored by:	Absolight

- Fix typos in option descriptions

Approved by:	portmgr blanket

- use *_IMPLIES PR:		216791 Submitted by:	Tobias Kortkamp

- make portlint happier

- update to 2.40.1 - add LICENSE

- use egrep for portability PR:		215089 Submitted by:	Raphael Kubo da Costa

- enable sparc64

- fix build on aarch64 PR:		213864 Submitted by:	Andrew Turner

- use ONLY_FOR_ARCHS PR:		213864

- disable build on arm PR:		213864

- fix path to vimdot Submitted by:	Jonathan Anderson

Most commonly used build systems support silent builds, when they hide actual commands executed and only show short summary line (like "CC foo.c"). CMake and ninja enable this by default, some autotools using ports do as well. This is unacceptable because we need complete build logs at any time, so we now switch to verbose build logs unconditionally. Note that this change deliberately affects ALL 

Change summary:

- Always do verbose builds for cmake, ninja and GNU configure (the
  latter includes check if --disable-silent-rules is actually supported
  by the configure script; there are isolated cases when it's not true)
- Remove CMAKE_VERBOSE, NINJA_VERBOSE and
  CONFIGURE_ARGS=--disable-silent-rules from all ports which set them
  for this is no longer needed
- Revert hacks for --disable-silent-rules support priorly committed
  to biology/ncbi-blast+ and net-p2p/mldonkey - no longer needed as well

Submitted by:	amdmi3
Reviewed by:	mat
Exp-run by:	antoine
Approved by:	portmgr (mat, antoine)
Differential Revision:	D7534

- update libgd to 2.2.2 - new MASTER_SITES - add security patch PR:		210913 Submitted by:	Piotr Kubaj MFH:		2016Q3 Security: CVE-2015-8874 Security: CVE-2016-3074 Security: http://www.openwall.com/lists/oss-security/2016/07/12/4

Convert USE_PHP*=yes into USES=php*

PR:		210529
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D6936

Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by default anyway and don't need to be listed

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

graphics/graphviz: Enable verbose build

Approved by:	portmgr (framework)

Update poppler to 0.40.0. [1]

Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.

PR:		206293 [1]
Submitted by:	olivierd@ [1]
Obtained from:	ubuntu [2], rubygem-poppler upstream [3]

- cleanup style

Unbreak build on head

With hat:	portmgr

- mark BROKEN on CURRENT

- make option NVTHREADS default PR:		203537 Submitted by:	Tobias Kortkamp

- cleanup

- use guile-2.0, use swig-3.0 - fixing OPTION GUILE, and OPTION PHP PR:		202506 Submitted by:	pi

Update poppler to 0.34.0. [1]

Chase all users of shlib version change of libpoppler.so.

PR:		201477 [1]
Submitted by:	olivierd@ [1]

- import security fix from git Security: format string vulnerability

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

Convert to USES=jpeg

- fix build with TCL enabled and without X11. PR:		157738 Submitted by:	Jimmy Olgeni

- add CPE PR:		199039

graphics category: Remove $PTHREAD_LIBS

graphics/zbar didn't pass check-plist (pre-existing), fixed.

approved by:	PTHREAD blanket

- fix option RUBY to build with ruby 2.1 PR:		198329

- Convert USE_PYTHON -> USES leftovers missed in the previous commits

Spotted by:	antoine
With hat:	python

- fix linker problems with smyrna PR:		195676 PR:		196288

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in the 32 ports that still use it.  Bump PORTREVISION on their dependent ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version.  When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.

Also remove the devel/pcre dependency from USE_GNOME=glib20.  It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it.  The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20.  Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.

PR:		195724
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Bump PORTREVISION after graphics/poppler update to 0.26.3

- Fix build for SMYRNA option

Approved by:	portmgr blanket

Cleanup plist

graphics/gts: - Convert to USES=libtool and bump dependent ports - Convert to USES=pathfix - Add INSTALL_TARGET=install-strip

Replace USE_AUTOTOOLS=libltdl with an ordinary LIB_DEPENDS in all ports. There are only 60 such ports so there doesn't need to be a separate keyword or USES for this.

Approved by:	portmgr (bapt)

- use ICONV_PREFIX Submitted by:	sunpoet

lang/guile: - Add USES=libtool and bump dependent ports - Replace Makefile.* patches with USES=pathfix - Replace config.h.in patch with USE_AUTOTOOLS=autoheader - Avoid automake by touching Makefile.in

Approved by:	portmgr (implicit, bump unstaged port)

- set option PHP broken on FreeBSD-11 PR:		192310

- fix order in USES

- update to 2.38.0