math/py-numpy2.4.6_1,1

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

math/py-numpy: Update to 1.23.1

PR:		265710
Reported by:	wen@
Exp-run by:	antoine@

math: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Amarendra Godbole <amarendra.godbole@gmail.com>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Fehlner (fehlner@gmx.de)
  *  Andrew L. Neporada <andrew@chg.ru>
  *  Andrey <gugu@zoo.rambler.ru>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@plab.ku.dk>
  *  Anton Berezin <tobez@tobez.org>
  *  Anton Shterenlikht
  *  Anton Shterenlikht <mexas@bris.ac.uk>
  *  Bob Eager <bob@eager.cx>
  *  Charlie Kester <corky1951@comcast.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Cheng-Lung Sung <clsung@dragon2.net>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Christopher J. Ruwe
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Chuck Hein <geekdude@pacbell.net>
  *  Cyrille Szymanski <cnszym@gmail.com>
  *  Dan Rue <drue@therub.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David Naylor <dbn@FreeBSD.org>
  *  David Naylor <naylor.b.david@gmail.com>
  *  Dereckson <dereckson@gmail.com>
  *  Devin Teske <dteske@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dmitry Sivachenko <mitya@yandex-team.ru>
  *  Don Croyle <croyle@gelemna.org>
  *  Douglas K. Rand (rand@meridian-enviro.com)
  *  Dylan Simon <dylan@dylex.net>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Eijiro Shibusawa <ej-sib@ice.uec.ac.jp>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eoin Lawless (eoin@maths.tcd.ie)
  *  Eric A. Griff <eagriff@global2000.net>
  *  Eric van Gyzen <vangyzen@stat.duke.edu>
  *  Ewgenij Gawrilow <gawrilow@math.tu-berlin.de>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  Frederic Han <han@math.jussieu.fr>
  *  Gabor Kovesdan <gabor@FreeBSD.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Guangyuan Yang <ygy@FreeBSD.org>
  *  Gustau Perez i Querol <gustau.perez@gmail.com>
  *  Heinz Tschabitscher
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Iblis Lin <iblis@hs.ntnu.edu.tw>
  *  Issei Suzuki <issei@jp.FreeBSD.ORG>
  *  Janni
  *  Jason Harris <jharris@widomaker.com>
  *  Javad Kouhi <javad.kouhi@gmail.com>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes M Dieterich <jmd@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Marino <marino@FreeBSD.org>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Ju Pengfei <ju.pengfei@gmail.com>
  *  Jukka A. Ukkonen <jau@iki.fi>
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Klaus T. Aehlig <aehlig@linta.de>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Kurt Jaeger <fbsd-ports@opsec.eu>
  *  Lars Engels <lme@FreeBSD.org>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.DE>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.de>
  *  Li-Wen Hsu <lwhsu@FreeBSD.org>
  *  Li-Wen Hsu <lwhsu@lwhsu.org>
  *  M. L. Dodson, <bdodson@scms.utmb.edu>
  *  Maho Nakata <maho@FreeBSD.org>
  *  Mario S F Ferreira <lioux@FreeBSD.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark R V Murray <markm@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Matthew Seaman <matthew@FreeBSD.org>
  *  Maurice Castro <maurice@serc.rmit.edu.au>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Maxime Henrion <mux@FreeBSD.org>
  *  Michael Haro <mharo@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Neumann <mneumann@ntecs.de>
  *  Muhammad Moinur Rahmanh <5u623l20@gmail.com>
  *  NAKATA Maho <chat95@mbox.kyoto-inet.or.jp>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nakata Maho <maho@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Olivier Duchateau
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@asme.org>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Pedro Giffuni <pfg@FreeBSD.org>
  *  Peter Pentchev <roam@FreeBSD.org>
  *  Philip Paeps <philip@FreeBSD.org>
  *  Pierre-Paul Lavoie <ppl@nbnet.nb.ca>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Rybicki <meritus@innervision.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Robert Jenssen
  *  Robin Schilham
  *  Rod Taylor <ports@rbt.ca>
  *  Roman Neuhauser <neuhauser@sigpipe.cz>
  *  Sander Vesik <sander@haldjas.folklore.ee>
  *  Scott Flatman <sf@dsinw.com>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Akifyev <asa@agava.com>
  *  Sergey Akifyev <asa@gascom.ru>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Shell Hung <shell@shellhung.org>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stefan A. Deutscher (sad@mailaps.org)
  *  Stefan Esser <se@StefanEsser.FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@FreeBSD.edu>
  *  Stephen Montgomery-Smith <stephen@FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Stephen Montgomery-Smith <stephen@missouri.edu>
  *  Steve Wills <steve@mouf.net>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@f2o.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas (<thierry@pompo.net>)
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Sandford <freebsduser@paradisegreen.co.uk>
  *  Timothy Bourke <timbob@bigpond.com>
  *  Tony Maher
  *  Tz-Huan Huang <tzhuan@csie.org>
  *  Vsevolod Stakhov <vsevolod@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Waitman Gobble <waitman@waitman.net>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Will Andrews <andrews@technologist.com>
  *  Yi-Hsuan Hsin <mhsin@mhsin.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yinghong.Liu <relaxbsd@gmail.com>
  *  Yoshiaki UCHIKAWA <yoshiaki@kt.rim.or.jp>
  *  Yukihiro Nakai <Nakai@technologist.com>
  *  Yuri Victorovich <yuri@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Yuri Victorovich <yuri@tsoft.com>
  *  Zhen REN <bg1tpt@gmail.com>
  *  amir.husaini@gmail.com
  *  arved
  *  asami
  *  b.f. <bf@FreeBSD.org>
  *  bart <lbartoletti@FreeBSD.org>
  *  bauerm
  *  bf <bf2006a@yahoo.com>
  *  bf <bf@FreeBSD.org>
  *  bf@FreeBSD.org
  *  bremner@unb.ca
  *  chinsan
  *  chuckr@FreeBSD.org
  *  dawe <daweonline@gmail.com>
  *  dbader@ece.unm.edu
  *  dd
  *  demon@FreeBSD.org
  *  dikshie
  *  eserte
  *  fenner
  *  gahr
  *  giffunip
  *  gmarco@giovannelli.it
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  janek@gaja.ipan.lublin.pl
  *  jhs@berklix.com / asami (original)
  *  jmz
  *  js@jeannot.org
  *  keith@FreeBSD.org
  *  ljo
  *  mr
  *  nobu@rd.isac.co.jp
  *  pauls@utdallas.edu
  *  pusto@web.de
  *  reg@shale.csir.co.za
  *  rfarmer@predatorlabs.net
  *  stephen@FreeBSD.org
  *  thierry@pompo.net
  *  tobez
  *  will
  * # Created by Matthias Fechner <mfechner@FreeBSD.org>

With hat:	portmgr

math/py-numpy: Update to 1.23.0

PR:		264837
Reported by:	wen@
Exp-run by:	antoine@

Mk/bsd.default-versions.mk: chase the switch to Python 3.9

Following the rules of
<https://wiki.freebsd.org/Python#Steps_to_switch_the_Python_default_version>

PR:		261703

math/py-numpy: Fix doc checksums

PR:		264231
Reported by:	david@isnic.is

math/py-numpy: Update to 1.22.4

PR:		264153
Reported by:	wen@
Exp-run by:	antoine@

math/py-numpy: revert obsolete commit 507c189b28

The sched_getaffinity() function in the C library returned a different
error code than expected (i.e. other than returned by GLIBC) if the
requested CPU set size did not match the one expected by the system.

The error code has been changed from ERANGE to EINVAL as expected by
the wrapper for os.sched_getaffinity() in Python, obsoleting the patch
that commented out the failing function call in setup.py.

math/py-numpy: work around build issue on -CURRENT

A sched_getaffinity function has been added to -CURRENT and the
Python build detects it presence and provides a Python function
os.sched_getaffinity().

Apparently the C library function is not correctly wrapped and
returns an out of buounds result.

Comment out the call of os.sched_getaffinity() call until this
function works correctly in the Python interpreter.

No port revision bump, since this is just a temporary fix for the
broken build on -CURRENT.

Reported by:	antoine

math/py-numpy: Update to 1.20.3

PR:		259063
Reported by:	wen@
Exp-run by:	antoine@

math/py-numpy: Add CPE information

Approved by:    portmgr (blanket)

math/py-numpy: mark as not compatible with python 3.10

Approved by:	portmgr blanket

math/py-numpy: Fix typo

- Bump PORTREVISION for package change

PR:		257396

math/suitesparse: adapt dependency lines after modularization

Do not bump PORTREVISION, because this should not change the resulting
packages.

Note for maintainers: try to not depend on the whole suitesparse package,
especially if your port do not require GraphBLAS (the biggest one).

*: Bump a few ports after the Python 3.7 to 3.8 switchover

Bump the PORTREVISION of the following ports as the concurrent symlinks
change with a new default version of Python:

* devel/py-setuptools
* lang/cython
* math/py-numpy

This is a follow-up to 6cd3db2d03cc544c5893e41dbbacd2000fcbd35a .

PR:		253815
Approved by:	kai (python, maintainer)

Remove # $FreeBSD$ from Makefiles.

Remove python 2.7 support from a few ports

math/py-numpy@py39: fix build on GCC architectures

cc1: error: unrecognized command line option "-Wno-unused-result"

Update to 1.16.6

Changes:	https://github.com/numpy/numpy/releases
PR:		246395
Exp-run by:	antoine

Bump 37 ports depending on math/openblas through USES=blaslapack:openblas because after the recent math/openblas update the library name changed in openblas

math/py-numpy: improve patch to fix build with OpenBlas

This patch adds openblas to the list of cblas compatible libs instead

PR:		243497
Submitted by:	John Hein <jcfyecrayz@liamekaens.com>

Fix math/openblas and bump dependent ports

* Fix build on i386 [1]
* Fix science/code_saturne build with new openblas [2]
* Avoid installing private headers [3]
* Prevent build from optimizing for host by correcting build confg [4]
* Bump portrevision of dependent ports [5]

This is correcting issues from r523749 [1][2][4] and r515970 [3]

PR:		231371
Reported by:	build cluster [1]
Reported by:	Dima Pasechnik <dimpase+freebsd@gmail.com> [2]
Reported by:	many [5]
Reviewed by:	mat, bapt
Approved by:	implicit, since this is a build fix

math/py-numpy: fix build when math/blas is installed

PR:		243497
Submitted by:	rsmith@xs4all.nl

math/openblas: Update to 0.3.7

While here, improve formatting and fix build of dependant ports.

PR:		231371
Submitted by:	yuri (initial version), pkubaj (ppc fixes)
Approved by:	Eijiro Shibusawa <phd_kimberlite@yahoo.co.jp> (maintainer)

Bump PORTREVISION after r520219

math/py-numpy: switch to OpenBLAS by default

Besides being faster consistently using the same BLAS implementation
should improve stability in case of accidental ABI mismatch.

PR:		240937
Approved by:	maintainer timeout (2 weeks)
MFH:		2019Q4

Update to 1.16.5

Changes:	https://github.com/numpy/numpy/releases
PR:		240424
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Update to 1.16.4

Changes:	https://github.com/numpy/numpy/releases
PR:		238964
Exp-run by:	antoine

Related to revision 499061 bump ports with USES=fortran to have them benefit from the improved situation where libgcc_s is only used when absolutely necessary.

Suggested by:	tijl

Bump a few PORTREVISIONs after r498529

With hat:	portmgr

Remove no-op TESTS_DESC

- Update pkg-descr

Update to 1.16.1

- Move TEST_DEPENDS upward
- Simplify Makefile

Changes:	https://github.com/numpy/numpy/releases
PR:		235721
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Update to 1.15.4

Changes:	https://github.com/numpy/numpy/releases
PR:		233643
Exp-run by:	antoine

Update MASTER_SITES and WWW

Update to 1.15.1

- Change MASTER_SITES to CHEESESHOP
- Use bsd.port.mk instead of bsd.port.pre.mk + bsd.port.post.mk

Changes:	https://github.com/numpy/numpy/releases
PR:		231664
Exp-run by:	antoine

math/py-numpy: update to 1.15.0

- update to 1.15
- convert to autoplist
- follow upstream change from nose test framework to pytest

Release notes:
https://github.com/numpy/numpy/releases/tag/v1.15.0

PR:		230094
Submitted by:	wen
Exp-run by:     antoine

Bump PORTREVISION for ports depending on the canonical version of GCC in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

- Update to 1.14.3

PR:		228230
Submitted by:	wen@(myself)
Exp-run by:	antoine@

math/suitesparse: Update 4.0.2 -> 5.2.0

Port changes:
* Change to DISTVERSION
* Update MASTER_SITES
* Change to LICENSE_COMB=dual
* Add LIB_DEPENDS
* Unbundle metis, made it a dependency
* Update do-build and do-install
* Update WWW

Bump 11 ports.
games/naev is marked broken because it depends on the no longer installed library.

PR:		210579
Submitted by:	yuri
Submitted by:	pfg
Approved by:	maintainer timeout (maho@FreeBSD.org, 21 months)
Approved by:	maintainer timeout (fortran@FreeBSD.org, 45 days)

Bump PORTREVISIONs of all users of math/mpc that we just updated to version 1.1.0 (via revision 464079).

Cosmetic change

exec_command.py states in comments it uses /bin/sh on POSIX for subprocess but incorrectly uses shell from environment. This makes compiles fail when compilation is done using the account 'nobody' which is default on pkg-fallout runs.

PR:		ports/225156
Submitted by:	self
Reported by:	self
Reviewed by:	antoine
Approved by: 	antoine

Enhance USES=uniquefiles to be more generic.

This allows to have more complex renaming schemes.  Until now, it could
only add a prefix or a suffix, but this was not working at all for man
pages, because it would give man/man1/pyfoo.1.gz-2.7 or
man/man1/pyfoo-1-2.7.gz.  With this change, a man page will be correctly
renamed to man/man1/pyfoo-2.7.1.gz.

Unfix ports that were already handling man pages.

PR:		220214
Submitted by:	Fukang Chen (previous patch)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D13444

Convert Python ports to FLAVORS.

Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

Update to 1.13.3

- Simplify MASTER_SITES
- Silence patch messages
- Fix symbolic link to avoid absolute path

Changes:	https://github.com/numpy/numpy/releases
PR:		222856
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC (via Mk/bsd.default-versions.mk and lang/gcc) which has moved from GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275